Uncertainties in Pressurized Thermal Shock Analyses

2019 ◽  
Author(s):  
M. Niffenegger ◽  
O. Costa Garrido ◽  
D. F. Mora ◽  
G. Qian ◽  
R. Mukin ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Thermal Shock ◽  
Probabilistic Approach ◽  
Pressure Vessels ◽  
Pressurized Water Reactor ◽  
Ansys Fluent ◽  
Pressurized Water ◽  
Integrity Assessment ◽  
Safety Margins ◽  
Pressurized Thermal Shock

Abstract Integrity assessment of reactor pressure vessels (RPVs) can be performed either by deterministic fracture mechanics (DFM) or/and by probabilistic fracture mechanics (PFM) analyses. In European countries and Switzerland, only DFM analyses are required. However, in order to establish the probabilistic approach in Switzerland, the advantages and shortcomings of the PFM are investigated in the frame of a national research project. Both, the results from DFM and PFM depend strongly on the previous calculated thermal-hydraulic boundary conditions. Therefore, complete integrity analyses involving several integrated numerical codes and methods were performed for a reference pressurized water reactor (PWR) RPV subjected to pressurized thermal shock (PTS) loads. System analyses were performed with the numerical codes RELAP5 and TRACE, whereas for structural and fracture mechanics calculations, the FAVOR and ABAQUS codes were applied. Additional computational fluid dynamics analyses were carried out with ANSYS/FLUENT, and the plume cooling effect was alternatively considered with GRS-MIX. The results from the different analyses tools are compared, to judge the expected overall uncertainty and reliability of PTS safety assessments. It is shown that the scatter band of the stress intensities for a fixed crack configuration is rather significant, meaning that corresponding safety margins should be foreseen. The conditional probabilities of crack initiation and RPV failure might also differ, depending on the considered random parameters and applied rules.

The Impact of an Improved Flaw Model on a Pressurized Thermal Shock Evaluation

2002 ◽  
Author(s):  
T. L. Dickson ◽  
F. A. Simonen
Keyword(s):  
Thermal Shock ◽  
Computational Models ◽  
The United States ◽  
Pressure Vessels ◽  
Pressurized Water ◽  
Evaluation Program ◽  
Pressurized Thermal Shock ◽  
Computational Methodology ◽  
The Impact ◽  
Flaw Characterization

The current regulations for pressurized thermal shock (PTS) were derived from computational models that were developed in the early-mid 1980s. The computational models utilized in the 1980s conservatively postulated that all fabrication flaws in reactor pressure vessels (RPVs) were inner-surface breaking flaws. It was recognized at that time that flaw-related data had the greatest level of uncertainty of the inputs required for the probabilistic-based PTS evaluations. To reduce this uncertainty, the United States Nuclear Regulatory Commission (USNRC) has in the past few years supported research at Pacific Northwest National Laboratory (PNNL) to perform extensive nondestructive and destructive examination of actual RPV materials. Such measurements have been used to characterize the number, size, and location of flaws in various types of welds and the base metal used to fabricate RPVs. The USNRC initiated a comprehensive project in 1999 to re-evaluate the current PTS regulations. The objective of the PTS Re-evaluation program has been to incorporate advancements and refinements in relevant technologies (associated with the physics of PTS events) that have been developed since the current regulations were derived. There have been significant improvements in the computational models for thermal hydraulics, probabilistic risk assessment (PRA), human reliability analysis (HRA), materials embrittlement effects on fracture toughness, and fracture mechanics methodology. However, the single largest advancement has been the development of a technical basis for the characterization of fabrication-induced flaws. The USNRC PTS-Revaluation program is ongoing and is expected to be completed in 2002. As part of the PTS Re-evaluation program, the updated risk-informed computational methodology as implemented into the FAVOR (Fracture Analysis of Vessels: Oak Ridge) computer code, including the improved PNNL flaw characterization, was recently applied to a domestic commercial pressurized water reactor (PWR). The objective of this paper is to apply the same updated computational methodology to the same PWR, except utilizing the 1980s flaw model, to isolate the impact of the improved PNNL flaw characterization on the PTS analysis results. For this particular PWR, the improved PNNL flaw characterization significantly reduced the frequency of RPV failure, i.e., by between one and two orders of magnitude.

Probabilistic Structural Integrity Analysis of Reactor Pressure Vessels During Pressurized Thermal Shock Events

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Kunio Onizawa
Keyword(s):  
Crack Initiation ◽  
Thermal Shock ◽  
Structural Integrity ◽  
Fracture Probability ◽  
Pressure Vessels ◽  
Sensitivity Analyses ◽  
Conditional Probabilities ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

To apply a probabilistic fracture mechanics (PFM) analysis to the structural integrity assessment of a reactor pressure vessel (RPV), a PFM analysis code has been developed at JAEA. Using this PFM analysis code, pascal version 3, the conditional probabilities of crack initiation (CPIs) and fracture for an RPV during pressurized thermal shock (PTS) events have been analyzed. Sensitivity analyses on certain input parameters were performed to clarify their effect on the conditional fracture probability. Comparisons between the conditional probabilities and the temperature margin (ΔTm) based on the current deterministic analysis method were made for various model plant conditions for typical domestic older types of RPVs. From the analyses, a good correlation between ΔTm and the conditional probability of crack initiation was obtained.

Estimation of Through-Wall Cracking Frequency of RPV Under PTS Events Using PFM Analysis Method for Identifying Conservatism Included in Current Japanese Code

2014 ◽  
Author(s):  
Kazuya Osakabe ◽  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Genshichiro Katsumata ◽  
Kunio Onizawa
Keyword(s):  
Fracture Toughness ◽  
Fracture Mechanics ◽  
Crack Initiation ◽  
Structural Integrity ◽  
Probabilistic Approach ◽  
Pressure Vessels ◽  
Assessment Procedure ◽  
Analysis Method ◽  
Integrity Assessment ◽  
The U.S

To assess the structural integrity of reactor pressure vessels (RPVs) during pressurized thermal shock (PTS) events, the deterministic fracture mechanics approach prescribed in Japanese code JEAC 4206-2007 [1] has been used in Japan. The structural integrity is judged to be maintained if the stress intensity factor (SIF) at the crack tip during PTS events is smaller than fracture toughness KIc. On the other hand, the application of a probabilistic fracture mechanics (PFM) analysis method for the structural reliability assessment of pressure components has become attractive recently because uncertainties related to influence parameters can be incorporated rationally. A probabilistic approach has already been adopted as the regulation on fracture toughness requirements against PTS events in the U.S. According to the PFM analysis method in the U.S., through-wall cracking frequencies (TWCFs) are estimated taking frequencies of event occurrence and crack arrest after crack initiation into consideration. In this study, in order to identify the conservatism in the current RPV integrity assessment procedure in the code, probabilistic analyses on TWCF have been performed for certain model of RPVs. The result shows that the current assumption in JEAC 4206-2007, that a semi-elliptic axial crack is postulated on the inside surface of RPV wall, is conservative as compared with realistic conditions. Effects of variation of PTS transients on crack initiation frequency and TWCF have been also discussed.

scholarly journals Probabilistic Fracture Mechanics Round Robin Analysis of Reactor Pressure Vessels during Pressurized Thermal Shock

2010 ◽  
Vol 47 (12) ◽  
pp. 1131-1139 ◽  
Author(s):  
Myung Jo JHUNG ◽  
Seok Hun KIM ◽  
Young Hwan CHOI ◽  
Yoon Suk CHANG ◽  
Xiangyuan XU ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Thermal Shock ◽  
Round Robin ◽  
Pressure Vessels ◽  
Probabilistic Fracture Mechanics ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

Assessment of Large-Scale Pressurized Thermal Shock Experiments Using the FAVOR Fracture Mechanics Computer Code

2004 ◽  
Author(s):  
T. L. Dickson ◽  
M. T. Kirk
Keyword(s):  
Fracture Mechanics ◽  
Thermal Shock ◽  
Large Scale ◽  
Major Element ◽  
Computer Code ◽  
Fracture Analysis ◽  
Pressure Vessels ◽  
Pressurized Thermal Shock ◽  
Computational Methodology ◽  
Evaluation Project

Large-scale experiments of pressure vessels performed at the Oak National Laboratory (ORNL)1 in the mid 1980s validated the applicability of the linear-elastic fracture mechanics (LEFM) computational methodology for application to fracture analysis of reactor pressure vessels (RPVs) in nuclear power plants. The current federal regulations to insure that nuclear RPVs maintain their structural integrity, when subjected to transients such as pressurized thermal shock (PTS) events, were derived in the early-mid 1980s from a comprehensive computational methodology of which LEFM is a major element. Recently, the United States Nuclear Regulatory Commission (USNRC) has conducted the PTS re-evaluation project that has the objective to establish a technical basis for a potential relaxation to the current PTS regulations which could have profound implications for plant license-extension considerations. The PTS re-evaluation project has primarily consisted of the development and application of an updated risk-based computational methodology that has been implemented into the Fracture Analysis of Vessels: Oak Ridge (FAVOR) computer code. LEFM continues to be a major element of the updated computational methodology. As part of the PTS re-evaluation program, there has been an extensive effort to validate that FAVOR has an accurate implementation of the LEFM methodology. This effort has consisted of the successful benchmarking of thermal analysis, stress analysis, and LEFM fracture analysis results between FAVOR and ABAQUS, a commercial general-purpose finite element computer code that has fracture mechanics capabilities, for a range of transient descriptions. The NRC has also participated in international round-robin benchmarking exercises in which FAVOR-generated solutions to well-specified PTS problems have been compared to solutions generated by other research institutions. A more fundamental aspect of the ongoing validation of FAVOR is demonstration that FAVOR can be used to successfully predict the results of large-scale fracture experiments. The objective of this paper is to document the FAVOR analysis of the first large-scale pressurized thermal shock experiment (PTSE) performed at ORNL. Results of these analyses provide validation that FAVOR accurately predicts the cleavage fracture initiation of a long surface breaking flaw in a large-scale thick-walled pressure vessel.

Fracture mechanics in design and service: ‘living with defects’ - Fracture mechanics as an aid to design and operation of nuclear plant

1981 ◽  
Vol 299 (1446) ◽  
pp. 227-236 ◽  
Keyword(s):  
Fracture Mechanics ◽  
Material Properties ◽  
Pressure Vessels ◽  
Nuclear Plant ◽  
Plant Design ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Plant Safety ◽  
Usual Criterion ◽  
Design Protection

Fracture mechanics analyses are an important part of nuclear plant design, supplementing the conventional design protection against failure to cover the possibility of the presence of crack-like defects. The degree of detail and accuracy required for a particular application depends on the possible consequences of a failure and whether the assessment is concerned with plant safety or with aspects of reliability. In the former case, a conservative approach is necessary and the prevention of initiation is the usual criterion. This approach is typified by the safety assessment applied to pressurized water reactor pressure vessels, which is outlined and discussed in relation to elastic plastic approaches and the importance of plant transient conditions, material properties (especially in weldments) and possible defect distributions. Fracture mechanics can help in defining quality control and quality assurance procedures, including both requirements for mechanical property appraisal and nondestructive testing. The latter aspects extend into operation, in respect of monitoring of plant conditions, surveillance of changes in material properties and the use of periodic inspection and plant condition monitoring techniques. A number of examples are quoted and recommendations made to permit improved fracture mechanics assessments.

Structural Reliability Evaluation on the Pressurized Water Reactor Pressure Vessel Under Pressurized Thermal Shock Events

2014 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Thermal Shock ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Reactor Pressure Vessel ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

The failure probability of the pressurized water reactor pressure vessel for a domestic nuclear power plant in Taiwan has been evaluated according to the technical basis of the USNRC’s new pressurized thermal shock (PTS) screening criteria. The ORNL’s FAVOR code and the PNNL’s flaw models are employed to perform the probabilistic fracture mechanics analysis based on the plant specific parameters of the domestic reactor pressure vessel. Meanwhile, the PTS thermal hydraulic and the probabilistic risk assessment data analyzed from a similar nuclear power plant in the United States for establishing the new PTS rule are applied as the loading condition. Besides, an RT-based regression formula derived by the USNRC is also utilized to verify the through-wall cracking frequencies. It is found that the through-wall cracking of the analyzed reactor pressure vessel only occurs during the PTS events resulted from the stuck-open primary safety relief valves that later reclose, but with only an insignificant failure risk. The results indicate that the Taiwan domestic PWR reactor pressure vessel has sufficient structural margin for the PTS attack until either the end-of-license or for the proposed extended operation.

Deterministic and Probabilistic Fracture Mechanics Analysis for Structural Integrity Assessment of Pressurized Water Reactor Pressure Vessel

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Kuan-Rong Huang ◽  
Chin-Cheng Huang ◽  
Hsiung-Wei Chou
Keyword(s):  
Structural Reliability ◽  
Pressure Vessels ◽  
Reactor Vessel ◽  
Benchmark Problems ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Oak Ridge ◽  
Integrity Assessment ◽  
Reactor Pressure

Cumulative radiation embrittlement is one of the main causes for the degradation of pressurized water reactor (PWR) reactor pressure vessels (RPVs) over their long-term operations. To assess structural reliability of degraded reactor vessels, the FAVOR code from the Oak Ridge National Laboratories of the U.S. is employed to perform probabilistic fracture analysis for existing Taiwan domestic PWR reactor vessels with consideration of irradiation embrittlement effects. The plant specific parameters of the analyzed reactor vessel associated with assumed design transients are both considered as the load conditions in this work. Furthermore, two overcooling transients of steam generator tube rupture (SGTR) and pressurized thermal shock (PTS) addressed in the USNRC/EPRI benchmark problems are also taken into account. The computed low failure probabilities can demonstrate the structural reliability of the analyzed reactor vessel for its both license base and extended operations. This work is helpful for the risk assessment and aging management of operating PWR RPVs and can also be referred as its regulatory basis in Taiwan.

Sign in / Sign up

Export Citation Format

Share Document