Microstructure of the source material for PbTe film deposition

1994 ◽  
Author(s):  
Su-ying Zhang ◽  
Ge-ya Wang ◽  
Tian-Shen Shi
2011 ◽  
Vol 679-680 ◽  
pp. 107-110
Author(s):  
Tae Woo Lee ◽  
Im Gyu Yeo ◽  
Byoung Chul Shin ◽  
Won Jae Lee ◽  
Mi Seon Park ◽  
...  

We adopted HMDS(Hexamethyledisilane) as a SiC(Silicon carbide) source material for epitaxial growth of 3C-SiC on Si substrate. Various growth profiles were investigated to optimize hetero-epitaxial growth of 3C-SiC layers. We also focused on the homogeneous film deposition of 3C-SiC on Si by employing two susceptor shapes, flat and tilted susceptors, to control a thickness of the boundary layer formed on the Si substrate. Fringe color patterns were observed on 3C-SiC layer on Si and hence it was easy to characterize the film uniformity by analyzing this color. 3C-SiC epitaxial layers were systematically analyzed by an optical microscope, a Raman spectroscopy, a SEM and an XRD.


Author(s):  
R. F. Schneidmiller ◽  
W. F. Thrower ◽  
C. Ang

Solid state materials in the form of thin films have found increasing structural and electronic applications. Among the multitude of thin film deposition techniques, the radio frequency induced plasma sputtering has gained considerable utilization in recent years through advances in equipment design and process improvement, as well as the discovery of the versatility of the process to control film properties. In our laboratory we have used the scanning electron microscope extensively in the direct and indirect characterization of sputtered films for correlation with their physical and electrical properties.Scanning electron microscopy is a powerful tool for the examination of surfaces of solids and for the failure analysis of structural components and microelectronic devices.


Author(s):  
M. Grant Norton ◽  
C. Barry Carter

Pulsed-laser ablation has been widely used to produce high-quality thin films of YBa2Cu3O7-δ on a range of substrate materials. The nonequilibrium nature of the process allows congruent deposition of oxides with complex stoichiometrics. In the high power density regime produced by the UV excimer lasers the ablated species includes a mixture of neutral atoms, molecules and ions. All these species play an important role in thin-film deposition. However, changes in the deposition parameters have been shown to affect the microstructure of thin YBa2Cu3O7-δ films. The formation of metastable configurations is possible because at the low substrate temperatures used, only shortrange rearrangement on the substrate surface can occur. The parameters associated directly with the laser ablation process, those determining the nature of the process, e g. thermal or nonthermal volatilization, have been classified as ‘primary parameters'. Other parameters may also affect the microstructure of the thin film. In this paper, the effects of these ‘secondary parameters' on the microstructure of YBa2Cu3O7-δ films will be discussed. Examples of 'secondary parameters' include the substrate temperature and the oxygen partial pressure during deposition.


Author(s):  
E. L. Hall ◽  
A. Mogro-Campero ◽  
L. G. Turner ◽  
N. Lewis

There is great interest in the growth of thin superconducting films of YBa2Cu3Ox on silicon, since this is a necessary first step in the use of this superconductor in a variety of possible electronic applications including interconnects and hybrid semiconductor/superconductor devices. However, initial experiments in this area showed that drastic interdiffusion of Si into the superconductor occurred during annealing if the Y-Ba-Cu-O was deposited direcdy on Si or SiO2, and this interdiffusion destroyed the superconducting properties. This paper describes the results of the use of a zirconia buffer layer as a diffusion barrier in the growth of thin YBa2Cu3Ox films on Si. A more complete description of the growth and characterization of these films will be published elsewhere.Thin film deposition was carried out by sequential electron beam evaporation in vacuum onto clean or oxidized single crystal Si wafers. The first layer evaporated was 0.4 μm of zirconia.


Author(s):  
G. Remond ◽  
R.H. Packwood ◽  
C. Gilles ◽  
S. Chryssoulis

Merits and limitations of layered and ion implanted specimens as possible reference materials to calibrate spatially resolved analytical techniques are discussed and illustrated for the case of gold analysis in minerals by means of x-ray spectrometry with the EPMA. To overcome the random heterogeneities of minerals, thin film deposition and ion implantation may offer an original approach to the manufacture of controlled concentration/ distribution reference materials for quantification of trace elements with the same matrix as the unknown.In order to evaluate the accuracy of data obtained by EPMA we have compared measured and calculated x-ray intensities for homogeneous and heterogeneous specimens. Au Lα and Au Mα x-ray intensities were recorded at various electron beam energies, and hence at various sampling depths, for gold coated and gold implanted specimens. X-ray intensity calculations are based on the use of analytical expressions for both the depth ionization Φ (ρz) and the depth concentration C (ρz) distributions respectively.


2001 ◽  
Vol 11 (PR3) ◽  
pp. Pr3-553-Pr3-560 ◽  
Author(s):  
W. Zhuang ◽  
L. J. Charneski ◽  
D. R. Evans ◽  
S. T. Hsu ◽  
Z. Tang ◽  
...  

2011 ◽  
Vol 1 (1) ◽  
pp. 33-46
Author(s):  
J. G. Bradbury

This essay explores Charles Williams’s use of the Arthurian myth to sustain a religious worldview in the aftermath of sustained attacks on the relevance and veracity of Christian belief in the early twentieth century. The premise to be explored is that key developments in science and philosophy made during the nineteenth and early twentieth centuries resulted in a cultural and intellectual milieu in which assertions of religious faith became increasingly difficult. In literary terms this became evident in, amongst other things, the significant reduction in the production of devotional poetry. By the late 1930s the intellectual environment was such that Charles Williams, a man of profound religious belief who might otherwise have been expected to produce devotional work, turned to a much older mode, that of myth, that had taken on new relevance in the modern world. Williams’s use of this mode allowed him the possibility of expressing a singularly Christian vision to a world in which such vision was in danger of becoming anathema. This essay examines the way in which Williams’s lexis, verse structure, and narrative mode builds on his Arthurian source material to allow for an appreciation of religiously-informed ideas in the modern world.


1997 ◽  
Vol 9 (1-3) ◽  
pp. 58-77
Author(s):  
Vitaly Kliatskine ◽  
Eugene Shchepin ◽  
Gunnar Thorvaldsen ◽  
Konstantin Zingerman ◽  
Valery Lazarev

In principle, printed source material should be made machine-readable with systems for Optical Character Recognition, rather than being typed once more. Offthe-shelf commercial OCR programs tend, however, to be inadequate for lists with a complex layout. The tax assessment lists that assess most nineteenth century farms in Norway, constitute one example among a series of valuable sources which can only be interpreted successfully with specially designed OCR software. This paper considers the problems involved in the recognition of material with a complex table structure, outlining a new algorithmic model based on ‘linked hierarchies’. Within the scope of this model, a variety of tables and layouts can be described and recognized. The ‘linked hierarchies’ model has been implemented in the ‘CRIPT’ OCR software system, which successfully reads tables with a complex structure from several different historical sources.


Sign in / Sign up

Export Citation Format

Share Document