DC power and loss evaluation of an out-of-plane mode electret-based energy harvester

Author(s):  
Zhaoshu Yang ◽  
Lihua Tang ◽  
Kai Tao ◽  
Kean Aw
1983 ◽  
Vol 2 (3-4) ◽  
pp. 125-135 ◽  
Author(s):  
J. J. F. Ramaekers ◽  
L. B. Krijnen ◽  
H. J. Lips ◽  
J. Langelaar ◽  
R. P. H. Rettschnick

s-Tetrazine argon complexes T−Arn (n = 1, 2) are formed in a supersonic expansion of argon seeded with s-tetrazine. The expansion was conducted through a nozzle of 50 or 100 μm with an argon stagnation pressure between 1 and 1.5 bar. From spectrally resolved measurements it is clear that vibrational redistribution processes as well as vibrational predissociation processes take place after SVL excitation within the complex.From rise and decay time experiments it can be concluded, that after excitation of the 6a1 complex level, the above mentioned processes are consecutive and not parallel. It appears that the out of plane mode 16a couples with the Van der Waals stretching mode. The predissociation rate of the 16a2 complex is observed to be 2.3 × 109 s−1.


2021 ◽  
Author(s):  
Valery P. Dragunov ◽  
Dmitriy I. Ostertak ◽  
Konstantin G. Pelmenev ◽  
Vitaly Yu. Dorzhiev

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 1067
Author(s):  
Hilmi Artun Oyman ◽  
Baris Can Efe ◽  
Mustafa Akin Icel ◽  
Yigit Daghan Gokdel ◽  
Onur Ferhanoglu ◽  
...  

A micro-scanner made of stainless-steel is fabricated via laser cutting technology for 3D Lissajous confocal imaging. The multi-gimbaled structure of the device provides two orthogonal torsional modes and three different out-of-plane modes. Torsional modes can be used to achieve 2D scan and all of the out-of-plane modes can be used in changing the focus of the micro-scanner to achieve a 3D scanning pattern. One of the out-of-plane modes along with two orthogonal torsional modes can be employed for scanning a large depth-stack in sparse fashion while another out-of-plane mode can satisfy a much higher scan fill-rate with less field of view (FOV). Simulations of the micro-scanner are obtained using finite element method (FEM) software and compared with the characterization data gathered from Laser Doppler Vibrometer (LDV). Using various out-of-plane modes, the constructed fill patterns are simulated on MATLAB and fill rates compared.


2002 ◽  
Vol 8 (3) ◽  
pp. 337-387 ◽  
Author(s):  
Ali H. Nayfeh ◽  
Haider N. Arafat ◽  
Char-Ming Chin ◽  
Walter Lacarbonara

We investigate the nonlinear nonplanar responses of suspended cables to external excitations. The equations of motion governing such systems contain quadratic and cubic nonlinearities, which may result in two-to-one and one-to-one internal resonances. The sag-to-span ratio of the cable considered is such that the natural frequency of the first symmetric in-plane mode is at first crossover. Hence, the first symmetric in-plane mode is involved in a one-to-one internal resonance with the first antisymmetric in-plane and out-of-plane modes and, simultaneously, in a two-to-one internal resonance with the first symmetric out-of-plane mode. Under these resonance conditions, we analyze the response when the first symmetric in-plane mode is harmonically excited at primary resonance. First, we express the two governing equations of motion as four first-order (i.e., state-space formulation) partial-differential equations. Then, we directly apply the methods of multiple scales and reconstitution to determine a second-order uniform asymptotic expansion of the solution, including the modulation equations governing the dynamics of the phases and amplitudes of the interacting modes. Then, we investigate the behavior of the equilibrium and dynamic solutions as the forcing amplitude and resonance detunings are slowly varied and determine the bifurcations they may undergo.


2010 ◽  
Vol 18 (9) ◽  
pp. 8800 ◽  
Author(s):  
M. Sathish Kumar ◽  
Xianji Piao ◽  
Sukmo Koo ◽  
Sunkyu Yu ◽  
Namkyoo Park

Sensors ◽  
2019 ◽  
Vol 19 (18) ◽  
pp. 3845 ◽  
Author(s):  
Andrius Čeponis ◽  
Dalius Mažeika ◽  
Artūras Kilikevičius

This paper represents a numerical and experimental investigation of the bidirectional piezoelectric energy harvester. The harvester can harvest energy from the vibrating base in two perpendicular directions. The introduced harvester consists of two cantilevers that are connected by a particular angle and two seismic masses. The first mass is placed at a free end of the harvester while the second mass is fixed at the joining point of the cantilevers. The piezoelectric energy harvester employs the first and the second out of plane bending modes. The numerical investigation was carried out to obtain optimal geometrical parameters and to calculate the mechanical and electrical characteristics of the harvester. The energy harvester can provide stable output power during harmonic and impact-based excitation in two directions. The results of the investigations showed that energy harvester provides a maximum output power of 16.85 µW and 15.9 4 µW when the base has harmonic vibrations in y and z directions, respectively. Maximum output of 4.059 nW/N and 3.1 nW/N in y and z directions were obtained in case of impact based excitation


Sign in / Sign up

Export Citation Format

Share Document