EMF measurements across the front of combustion wave during layer by layer surface laser sintering of exothermal powder compositions

2007 ◽  
Author(s):  
I. Shishkovskiy ◽  
V. Sherbakov ◽  
Yu. Morozov
Keyword(s):  
Combustion Wave ◽  
Laser Sintering ◽  
Layer By Layer ◽  
Layer Surface ◽  
Emf Measurements ◽  
Surface Laser

Improving the redox flow battery performance of low-cost thin polyelectrolyte membranes by layer-by-Layer Surface assembly

2019 ◽  
Vol 413 ◽  
pp. 182-190 ◽  
Author(s):  
Saidatul Sophia Sha'rani ◽  
Ebrahim Abouzari-Lotf ◽  
Mohamed Mahmoud Nasef ◽  
Arshad Ahmad ◽  
Teo Ming Ting ◽  
...  
Keyword(s):  
Low Cost ◽  
Layer By Layer ◽  
Layer Surface ◽  
Redox Flow Battery ◽  
Flow Battery ◽  
Polyelectrolyte Membranes ◽  
Surface Assembly

All-Nanoparticle Layer-by-Layer Surface Modification of Micro- and Ultrafiltration Membranes

Langmuir ◽  
2014 ◽  
Vol 30 (19) ◽  
pp. 5545-5556 ◽  
Author(s):  
Luis Escobar-Ferrand ◽  
Diya Li ◽  
Daeyeon Lee ◽  
Christopher J. Durning
Keyword(s):  
Surface Modification ◽  
Layer By Layer ◽  
Layer Surface ◽  
Ultrafiltration Membranes ◽  
Nanoparticle Layer

scholarly journals Layer-by-layer surface modification of polyethersulfone membranes using polyelectrolytes and AgCl/TiO 2 xerogels

2015 ◽  
Vol 493 ◽  
pp. 807-819 ◽  
Author(s):  
Papatya Kaner ◽  
Daniel J. Johnson ◽  
Erol Seker ◽  
Nidal Hilal ◽  
Sacide Alsoy Altinkaya
Keyword(s):  
Surface Modification ◽  
Layer By Layer ◽  
Layer Surface

Improvement of Surface Layer Formation Technology for Articles Produced by Layer-by-Layer Laser Sintering

2013 ◽  
Vol 379 ◽  
pp. 56-59 ◽  
Author(s):  
N.A. Saprykina ◽  
A.A. Saprykin
Keyword(s):  
Surface Layer ◽  
Powder Material ◽  
Copper Powder ◽  
Manufacturing Process ◽  
Laser Sintering ◽  
Layer By Layer ◽  
Layer Formation ◽  
Mathematical Relation ◽  
Surface Layer Formation

Mathematical relation between roughness of the surface layer of the sintered article and layer-by-layer laser sintering modes obtained from experiments conducted using copper powder material PMS-1. Authors suggest that split manufacturing process of an article and its inner part must be split to roughing, semi-finishing and finishing modes.

Evolution of Direct Selective Laser Sintering of Metals

2011 ◽  
Vol 383-390 ◽  
pp. 6252-6257
Author(s):  
Francesco Cardaropoli ◽  
Fabrizia Caiazzo ◽  
Vincenzo Sergi
Keyword(s):  
Complex Geometry ◽  
Selective Laser Sintering ◽  
Laser Sintering ◽  
Layer By Layer ◽  
Metal Powders ◽  
Additive Process ◽  
Operator Experience ◽  
Critical Phases ◽  
Time Required

Direct Metal Selective Laser Sintering (DMSLS) is a layer-by-layer additive process for metal powders, which allows quick production of complex geometry parts. The aim of this study is to analyse the improvement of DMSLS with “EOSINT M270”, the new laser sintering machine developed by EOS. Tests were made on sintered parts of Direct Metal 20 (DM20), a bronze based powder with a mean grain dimension of 20 μm. Different properties and accuracy were evaluated for samples manufactured with three different exposure strategies. Besides mechanical properties, the manufacturing process was also examined in order to evaluate its characteristics. The quality of laser sintered parts is too affected by operator experience and skill. Furthermore, critical phases are not automatic and this causes an extension of time required for the production. Due to these limitations, DMSLS can be used for Rapid Manufacturing, but it is especially suitable to few sample series.

Surface Laser Sintering of exothermic powder compositions

2007 ◽  
Vol 91 (2) ◽  
pp. 427-436 ◽  
Author(s):  
I. V. Shishkovsky ◽  
V. I. Scherbakov ◽  
Y. G. Morozov ◽  
M. V. Kuznetsov ◽  
I. P. Parkin
Keyword(s):  
Laser Sintering ◽  
Surface Laser
Sign in / Sign up

Export Citation Format

Share Document