Porosity variations induced by swelling agent exchange were studied in a styrene-divinylbenzene copolymer. Standard methods were used in the characterization of copolymer porosity in the dry state and the results were compared with related structural parameters derived from small angle X-ray scattering (SAXS) measurements as developed for the characterization of two-phase systems. The SAXS method was also used for porosity determination in swollen samples. The differences in the porosity of dry samples were found to be an effect of the drying process, while in the swollen state the sample swells and deswells isotropically.
It is shown that small-angle X-ray scattering from binary liquid mixtures close to the critical point of demixing can be used forin situcharacterization of beam-induced heating of liquid samples. For demonstration purposes, the proposed approach is applied on a well studied critical mixture of water and 2,6-lutidine. Given a typical incident X-ray flux at a third-generation synchrotron light source and using a 1.5 mm-diameter glass capillary as sample container, a beam-induced local temperature increase of 0.45 ± 0.10 K is observed.
X-ray scattering characterization of iron oxide nanoparticles Langmuir film on water surface and on a solid substrate