scholarly journals Efficient luminescent solar cells based on tailored mixed-cation perovskites

2016 ◽  
Vol 2 (1) ◽  
pp. e1501170 ◽  
Author(s):  
Dongqin Bi ◽  
Wolfgang Tress ◽  
M. Ibrahim Dar ◽  
Peng Gao ◽  
Jingshan Luo ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Precursor Solution ◽  
Weight Percent ◽  
Open Circuit ◽  
Single Step ◽  
Molar Ratio

We report on a new metal halide perovskite photovoltaic cell that exhibits both very high solar-to-electric power-conversion efficiency and intense electroluminescence. We produce the perovskite films in a single step from a solution containing a mixture of FAI, PbI2, MABr, and PbBr2(where FA stands for formamidinium cations and MA stands for methylammonium cations). Using mesoporous TiO2and Spiro-OMeTAD as electron- and hole-specific contacts, respectively, we fabricate perovskite solar cells that achieve a maximum power-conversion efficiency of 20.8% for a PbI2/FAI molar ratio of 1.05 in the precursor solution. Rietveld analysis of x-ray diffraction data reveals that the excess PbI2content incorporated into such a film is about 3 weight percent. Time-resolved photoluminescence decay measurements show that the small excess of PbI2suppresses nonradiative charge carrier recombination. This in turn augments the external electroluminescence quantum efficiency to values of about 0.5%, a record for perovskite photovoltaics approaching that of the best silicon solar cells. Correspondingly, the open-circuit photovoltage reaches 1.18 V under AM 1.5 sunlight.

Efficient large guanidinium mixed perovskite solar cells with enhanced photovoltage and low energy losses

2019 ◽  
Vol 55 (30) ◽  
pp. 4315-4318 ◽  
Author(s):  
Shengfan Wu ◽  
Zhen Li ◽  
Jie Zhang ◽  
Tiantian Liu ◽  
Zonglong Zhu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Open Circuit Voltage ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Low Energy ◽  
Energy Losses ◽  
Perovskite Lattice

We present a strategy for suppressing the open-circuit voltage (Voc) loss of perovskite solar cells by incorporating large guanidinium cations (Gua+) into a perovskite lattice, leading to a significantly improved Voc of 1.19 V and an impressive power conversion efficiency of >21%.

scholarly journals Effects of Preheating Treatments on the Performance of Perovskite Solar Cells

2022 ◽  
Vol 2160 (1) ◽  
pp. 012036
Author(s):  
Haoyu Wang ◽  
Junjie Yang ◽  
Xiaodong Liu ◽  
Shuanghong Wu ◽  
Xiangru Wang
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Spin Coating ◽  
High Performance ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Great Influence ◽  
Precursor Solution ◽  
Processing Parameters

Abstract Perovskite solar cells (PSCs) have fascinated widespread focus for prominent perfomances recently. The processing parameters in spin-coating have great influence on the efficiency of PSCs. Herein, we have researched the influence of different preheating treatments on the perfomance of PSCs. The power conversion efficiency (PCE) has a significant enhancement to 15.89% through preheating the substrate together with precursor solution simultaneously. This work promotes the development of high performance PSCs and their industrialization.

scholarly journals Effect of Ammonium Halide Additives on the Performance of Methyl Amine Based Perovskite Solar Cells

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1417 ◽  
Author(s):  
Do Heo ◽  
Zhengtang Luo ◽  
Soo Kim
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Methyl Amine ◽  
Scanning Electron

CH3NH3PbI3-xClx species were fabricated as light-absorbing layers for perovskite solar cells (PSCs), by employing NH4I, NH4Br, and NH4Cl as additives via annealing at 100 °C for different times. Solutions containing CH3NH3I, PbI2, and PbCl2 (4:1:1 molar ratio) in N,N-dimethylformamide were used to prepare perovskites with NH4I, NH4Br, and NH4Cl as additives, at concentrations of 0.1 M and 0.3 M. The additives helped increase the grain size and reduce pinholes in the perovskite films, as confirmed by field-emission scanning electron microscopy. The X-ray diffraction profiles of CH3NH3PbI3-xClx clearly showed peaks at 14° and 28° for the samples with additives, indicative of crystallinity. The best PSC performance with a power conversion efficiency of 9.13%, was achieved using 0.1 M NH4I by annealing for 5 min, whereas the power conversion efficiency of the perovskite solar cells without additives was 5.40%.

High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules

2017 ◽  
Vol 1 (9) ◽  
pp. 1935-1943 ◽  
Author(s):  
Bat-El Cohen ◽  
Malgorzata Wierzbowska ◽  
Lioz Etgar
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
High Efficiency ◽  
Open Circuit Voltage ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Lead Bromide

A power conversion efficiency of 9.5% and an open circuit voltage of more than 1.4 V were achieved for bromide-based quasi 2D perovskite solar cells.

A thiourea additive-based quadruple cation lead halide perovskite with an ultra-large grain size for efficient perovskite solar cells

Nanoscale ◽  
2019 ◽  
Vol 11 (45) ◽  
pp. 21824-21833 ◽  
Author(s):  
Jyoti V. Patil ◽  
Sawanta S. Mali ◽  
Chang Kook Hong
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Inorganic Perovskite ◽  
Halide Perovskite ◽  
Lead Halide

Controlling the grain size of the organic–inorganic perovskite thin films using thiourea additives now crossing 2 μm size with >20% power conversion efficiency.

scholarly journals Two-dimensional or passivation treatment: the effect of Hexylammonium post deposition treatment on 3D halide perovskite-based solar cells

2021 ◽  
Author(s):  
Stav Rahmany ◽  
Lioz Etgar
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Two Dimensional ◽  
Theoretical Limit ◽  
Halide Perovskite ◽  
Passivation Treatment ◽  
Post Deposition

Much effort has been made to push the power conversion efficiency of perovskite solar cells (PSCs) towards the theoretical limit. Recent studies have shown that post deposition treatment of barrier...

scholarly journals SnO2–Ti3C2 MXene electron transport layers for perovskite solar cells

2019 ◽  
Vol 7 (10) ◽  
pp. 5635-5642 ◽  
Author(s):  
Lin Yang ◽  
Yohan Dall'Agnese ◽  
Kanit Hantanasirisakul ◽  
Christopher E. Shuck ◽  
Kathleen Maleski ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
P Addition

Addition of the Ti3C2 into SnO2 enhanced the power conversion efficiency due to the good conductivity of Ti3C2 nanosheets.

Enhanced power conversion efficiency and preferential orientation of the MAPbI3 perovskite solar cells by introduction of urea as additive

2019 ◽  
Vol 73 ◽  
pp. 130-136 ◽  
Author(s):  
Ying Li ◽  
Lingwei Li ◽  
Aditya S. Yerramilli ◽  
Yuanqing Chen ◽  
Daining Fang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Preferential Orientation

Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: A review

2021 ◽  
Author(s):  
Wenbin Guo ◽  
Guanhua Ren ◽  
Wenbin Han ◽  
Yanyu Deng ◽  
Wei Wu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Inorganic Hybrid ◽  
The Past ◽  
Hybrid Perovskite

Organic-inorganic hybrid perovskite solar cells (PSCs) have made unprecedented progress in the past ten years, the power conversion efficiency of which increased from 3.8% in 2009 to 25.5% in 2019....

Sign in / Sign up

Export Citation Format

Share Document