Sedimentologic and hydrologic characterization of surficial sedimentary facies in the Big Lost Trough, Idaho National Engineering and Environmental Laboratory, eastern Idaho

Author(s):  
Linda E. Mark ◽  
Glenn D. Thackray
2007 ◽  
Vol 30 (2) ◽  
pp. 118-132
Author(s):  
Ana Carolina Lisbôa Barboza ◽  
Gerson Cardoso da Silva Jr ◽  
Claudio Limeira Mello

The present study aims for the characterization of the hydrogeological parameters of the Paleogenic fluvial deposits of Volta Redonda Geological Basin, through hydraulic conductivity determinations and grain sized analyses. The overall goal was to produce a hydrogeological data base applicable to the characterization of hydrofacies (interconnected sedimentary bodies with distinct hydraulic properties) and the modeling groundwater flow. The used methods used consisted of in situ permeability determinations (Guelph permeameters) and laboratory tests (variable head permeameter), besides grain size analyses carried out in each sedimentary facies in the study area. These sedimentary facies were characterized by Marques (2006) and belong to the Resende and Pinheiral formations. The permeameter results were coherent to the sedimentological characteristics. The Resende Formation sedimentary deposits are constituted by medium to fine sand with presence of argillaceous matrix and present moderate to very low hydraulic conductivity, varying between 10-4 to 10-8 cm/s, which indicates a poor reservoir. The Pinheiral Formation presents sandy layers with conglomeratic lenses, limited by small thickness pelitic intervals, with a very low permeability, with a hydraulic conductivity varying between 10-5 to 10-7 cm/s. The upper layer has the maximum permeability, around 10-3 cm/s. This formation presents a medium reservoir characteristics and it must be taken into consideration that the upper layer has as role in recharge to the aquifer. From the results of hydraulic conductivity, that varies from 10-8 to 10-3 cm/s for the Resende and Pinheiral formations, it is concluded that these deposits a low to medium hydraulic conductivity, explaining the low productivity of the water-bearing multilayered aquifer of Volta Redonda Basin.


2012 ◽  
Vol 546-547 ◽  
pp. 656-660
Author(s):  
Wan Jin Liu ◽  
Jin Chao An ◽  
Hui Zhou ◽  
Chao Su

The seismic attribute has multi-solution, and can not correspond to geological bodies exactly, a variety of seismic attributes information interpreted by changes in their characteristic parameters was prone to conflicts, the fusion technology of multi-attribute fuses the independent single-attribute in seismic data together, it can use the advantage of each attribute to display the characterization of geological body vividly. In this paper, we extract the attributes slice under the control of isochronous stratigraphic framework along layers, optimize the attribute using reference well data to select three independent attributes that can reflect lithological and physical properties, and fuse the three favorable attributes using the image of RGB fusion technology for better identification of sedimentary facies.


The present study is about the analysis of sullage collected from Tiruvanchery region, Chennai, Tamil Nadu, India. Sullage is the waste water from households, sinks, bathrooms, kitchen households but except the waste water from toilets. In this project, 6 samples of waste water were collected in 3 different apartments. The apartments are Ruby Grand, Ruby Regency and Green Paradise. The 2 samples of the waste water are the kitchen waste water and washing clothes waste water. Physical, chemical and biological parameters are tested in environmental laboratory. The chemical parameters were tested using titrimetric method. It is found that all samples were safe against pH, Alkalinity, Flouride, Chloride, Iron, Phosphate, and Turbidity which are within the permissible limits of IS3306 (1974)


2019 ◽  
Vol 219 (2) ◽  
pp. 1300-1315 ◽  
Author(s):  
C Bailly ◽  
M Adelinet ◽  
Y Hamon ◽  
J Fortin

SUMMARY For the subsurface characterization of carbonates, linking physical properties (e.g. porosity and seismic reflectors) with their geological significance (e.g. sedimentary facies and diagenesis) is of primary importance. To address this issue, we study the lacustrine and palustrine carbonates on Samos Island through a geological and geophysical characterization of a sedimentary succession. The microstructures of the samples are described, and the samples’ physical properties are measured (porosity, P-wave velocity and density). The results show that the identification of only the primary (i.e. sedimentary) microstructure is not sufficient for explaining the huge variations in porosity and P-wave velocity. Hence, we highlight two early diagenetic processes that strongly impact the microstructures and control the physical properties: (i) neomorphism occludes porosity and increases the P-wave velocity of mud- and grain-supported microstructures, which implies a mineralogical stabilization of the grains; (ii) conversely, the dissolution process creates porosity and decreases the P-wave velocity of grain-supported microstructures if the mineralogical composition of the grains is not previously stabilized. These two diagenetic processes thus depend on the primary microstructures and mineralogy of the sediments. This work aims to explain the variations in porosity and P-wave velocity for each defined primary microstructure. A 1-D seismogram is then built to highlight seismic reflectors with a metre-scale resolution. These reflectors are associated with several geological contrasts. Hard kicks (positive amplitude reflectors) match well with exposure surfaces related to palaeosols. They correspond to contrasts between non-modified primary microstructures and highly neomorphosed microstructures. Conversely, soft kicks (negative amplitude reflectors) are linked with diagenetic contrasts (e.g. neomorphosed microstructures versus non-modified primary microstructures) and sedimentary contrasts that can be overprinted by diagenesis (e.g. neomorphosed mud-supported microstructures versus dissolved grain-supported microstructures). This study highlights that high-resolution seismic reflectors of lacustrine and palustrine carbonates are strongly related to the spatial contrasts of primary microstructures overprinted by early diagenesis.


2020 ◽  
Vol 90 (11) ◽  
pp. 1463-1499
Author(s):  
William J. McMahon ◽  
Alexander G. Liu ◽  
Benjamin H. Tindal ◽  
Maarten G. Kleinhans

ABSTRACT The Rawnsley Quartzite of South Australia hosts some of the world's most diverse Ediacaran macrofossil assemblages, with many of the constituent taxa interpreted as early representatives of metazoan clades. Globally, a link has been recognized between the taxonomic composition of individual Ediacaran bedding-plane assemblages and specific sedimentary facies. Thorough characterization of fossil-bearing facies is thus of fundamental importance for reconstructing the precise environments and ecosystems in which early animals thrived and radiated, and distinguishing between environmental and evolutionary controls on taxon distribution. This study refines the paleoenvironmental interpretations of the Rawnsley Quartzite (Ediacara Member and upper Rawnsley Quartzite). Our analysis suggests that previously inferred water depths for fossil-bearing facies are overestimations. In the central regions of the outcrop belt, rather than shelf and submarine canyon environments below maximum (storm-weather) wave base, and offshore environments between effective (fair-weather) and maximum wave base, the succession is interpreted to reflect the vertical superposition and lateral juxtaposition of unfossiliferous non-marine environments with fossil-bearing coastal and shoreface settings. Facies comprise: 1, 2) amalgamated channelized and cross-bedded sandstone (major and minor tidally influenced river and estuarine channels, respectively), 3) ripple cross-laminated heterolithic sandstone (intertidal mixed-flat), 4) silty-sandstone (possible lagoon), 5) planar-stratified sandstone (lower shoreface), 6) oscillation-ripple facies (middle shoreface), 7) multi-directed trough- and planar-cross-stratified sandstone (upper shoreface), 8) ripple cross-laminated, planar-stratified rippled sandstone (foreshore), 9) adhered sandstone (backshore), and 10) planar-stratified and cross-stratified sandstone with ripple cross-lamination (distributary channels). Surface trace fossils in the foreshore facies represent the earliest known evidence of mobile organisms in intermittently emergent environments. All facies containing fossils of the Ediacaran macrobiota remain definitively marine. Our revised shoreface and coastal framework creates greater overlap between this classic “White Sea” biotic assemblage and those of younger, relatively depauperate “Nama”-type biotic assemblages located in Namibia. Such overlap lends support to the possibility that the apparent biotic turnover between these assemblages may reflect a genuine evolutionary signal, rather than the environmental exclusion of particular taxa.


2018 ◽  
Author(s):  
Shiquan Zhao ◽  
Zhu Xia ◽  
Yuzhen Wang ◽  
Kai Li ◽  
Chuanhang He

Sign in / Sign up

Export Citation Format

Share Document