CHEMICAL COMPOSITION OF INTRUSIVE ROCKS FROM THE FAIR HAVEN HEIGHTS AND FOXON REGIONS, HARTFORD BASIN, CONNECTICUT

Soil samples from Mont St. Hilaire, one of the Monteregian Hills of Quebec, were analyzed by X-ray fluorescence for the elements Fe, Ca, K, Ti, Mn, Sr, Zr, Nb, Zn, and Rb. The samples were taken below the surface organic-rich horizon.The composition of the parent material was calculated by comparing the soils with local rocks having similar Ti/Zr ratios, assuming that the Ti/Zr ratio has not changed appreciably during the soil-forming process. This comparison indicates that there has been little change in the concentration of most of the elements during weathering. Average ratios of concentration in soils to concentration in calculated parent material for the elements were Fe 1.25, Nb 1.11, Ca 1.08, Rb 1.07, Zn 1.02, Zr 0.96, Ti 0.94, Mn 0.82, Sr 0.69, K 0.54; that is, Fe showed a tendency to accumulate, and K, Sr, and possibly Mn showed a tendency to be depleted in the soils.The areal distribution of elements in the soils is in general agreement with what is known of the distribution of syenitic and essexitic intrusive rocks which make up most of the mountain.

Download Full-text

Morphological and geochemical features of zircon from intrusive rocks of El Sela area, Eastern Desert, Egypt

News of the Ural State Mining University ◽

10.21440/2307-2091-2020-3-7-18 ◽

2020 ◽

Vol 59 (3) ◽

pp. 7-18

Author(s):

Mohamed Mahmoud Fathy GHONEIM ◽

◽

Elena Gennad’evna PANOVA ◽

Ahmed El Sayed ABDEL GAWAD ◽

Svetlana Yur’evna YANSON ◽

...

Keyword(s):

Chemical Composition ◽

Internal Structure ◽

Detection Limits ◽

Eastern Desert ◽

Coarse Grained ◽

Accessory Mineral ◽

The Core ◽

Intrusive Rocks ◽

The Difference ◽

Zircon Morphology

The intrusive rocks in El Sela area can be arranged from the oldest to the youngest into: two-mica granite and postgranitic dikes which include microgranite, dolerite and bostonite dikes. Zircon is the most abundant accessory mineral. Zircon morphology and geochemical features are good indicators for evolution of rocks. The aim of the work is to determine the morphology, internal structure and chemical composition of zircon to identify the difference of zircon in various intrusive rocks. Results show that morphologically, zircon in the two-mica granite is euhedral coarse- grained with zonation. It is represented by crystals up to 125 µm and corresponds to S10 and P2. Zircon in post-granitic dikes exhibit irregular forms. Geochemically, zircon crystals have higher ZrO2 values in the core whereas HfO2 , UO2 , ThO2 increase at the peripheries of zoned crystals of the two-mica granite. Zircon of two-mica granite contains high HfO2 , UO2 , ThO2 and CaO contents but low Sc2 O3 content. HfO2 is not detected in zircon of microgranite. TiO2 in zircon of two-mica granite and bostonite dikes is under detection limits. REEs are not recorded in zircon of the studied intrusive rocks

Download Full-text

The Origin of the Moon

Symposium - International Astronomical Union ◽

10.1017/s0074180900178209 ◽

1962 ◽

Vol 14 ◽

pp. 149-155 ◽

Cited By ~ 1

Author(s):

E. L. Ruskol

Keyword(s):

Chemical Composition ◽

Solar System ◽

The Moon ◽

The Earth ◽

The Difference ◽

Origin Of The Moon

The difference between average densities of the Moon and Earth was interpreted in the preceding report by Professor H. Urey as indicating a difference in their chemical composition. Therefore, Urey assumes the Moon's formation to have taken place far away from the Earth, under conditions differing substantially from the conditions of Earth's formation. In such a case, the Earth should have captured the Moon. As is admitted by Professor Urey himself, such a capture is a very improbable event. In addition, an assumption that the “lunar” dimensions were representative of protoplanetary bodies in the entire solar system encounters great difficulties.

Download Full-text

On the Inhomogeneity of Chemical Composition over the Surface of 21 Per

International Astronomical Union Colloquium ◽

10.1017/s0252921100080659 ◽

1976 ◽

Vol 32 ◽

pp. 343-349

Author(s):

Yu.V. Glagolevsky ◽

K.I. Kozlova ◽

V.S. Lebedev ◽

N.S. Polosukhina

Keyword(s):

Chemical Composition ◽

Spectral Line ◽

Variable Star ◽

Radial Velocities ◽

Crimean Astrophysical Observatory ◽

Line Intensities ◽

Magnetic Variable

SummaryThe magnetic variable star 21 Per has been studied from 4 and 8 Å/mm spectra obtained with the 2.6 - meter reflector of the Crimean Astrophysical Observatory. Spectral line intensities (Wλ) and radial velocities (Vr) have been measured.

Download Full-text

Structural Studies on Mitotic Spindle Fibres

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100070345 ◽

1978 ◽

Vol 36 (3) ◽

pp. 615-626

Author(s):

J.R. Mcintosh

Keyword(s):

Chemical Composition ◽

Mitotic Spindle ◽

Structural Studies ◽

Mitotic Apparatus ◽

Chemical Studies ◽

Medical Interest ◽

Spindle Fibres

The mitotic apparatus is a structure of obvious biological and medical interest, but it has proved to be a difficult cellular machine to understand. The chemical composition of the spindle is only slightly elucidated, largely because of the difficulties in preparing useful isolates of the structure. Chemical studies of the mitotic spindle have been reviewed elsewhere (Mcintosh, 1977), and will not be discussed further here. One would think that structural studies on the mitotic apparatus (MA) in situ would be straightforward, but even with this approach there is some disagreement in the results obtained with various methods and by different investigators. In this paper I will review briefly the approaches which have been used in structural studies of the MA, pointing out the strengths and problems of each approach. I will summarize the principal findings of the different methods, and identify what seem to be fruitful avenues for further work.

Download Full-text

Effects of 5-5'-Diphenyl-2-thiohydantoin (DPTH) and Thyroxine on the Ultrastructure and Chemical Composition of Rat Liver

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100066917 ◽

1971 ◽

Vol 29 ◽

pp. 570-571

Author(s):

E. A. Elfont ◽

R. B. Tobin ◽

D. G. Colton ◽

M. A. Mehlman

Keyword(s):

Chemical Composition ◽

Rat Liver ◽

Future Study ◽

Mode Of Action ◽

Liver Mitochondria ◽

Rat Liver Mitochondria ◽

Effective Inhibitor ◽

Biochemical Effects ◽

Glycerophosphate Dehydrogenase ◽

Stimulation Of

Summary5,-5'-diphenyl-2-thiohydantoin (DPTH) is an effective inhibitor of thyroxine (T4) stimulation of α-glycerophosphate dehydrogenase in rat liver mitochondria. Because this finding indicated a possible tool for future study of the mode of action of thyroxine, the ultrastructural and biochemical effects of DPTH and/or thyroxine on rat liver mere investigated.Rats were fed either standard or DPTH (0.06%) diet for 30 days before T4 (250 ug/kg/day) was injected. Injection of T4 occurred daily for 10 days prior to sacrifice. After removal of the liver and kidneys, part of the tissue was frozen at -50°C for later biocheailcal analyses, while the rest was prefixed in buffered 3.5X glutaraldehyde (390 mOs) and post-fixed in buffered 1Z OsO4 (376 mOs). Tissues were embedded in Araldlte 502 and the sections examined in a Zeiss EM 9S.Hepatocytes from hyperthyroid rats (Fig. 2) demonstrated enlarged and more numerous mitochondria than those of controls (Fig. 1). Glycogen was almost totally absent from the cytoplasm of the T4-treated rats.

Download Full-text

Applications of Photoelectron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100092499 ◽

1976 ◽

Vol 34 ◽

pp. 506-507

Author(s):

William J. Baxter

Keyword(s):

Electron Microscopy ◽

Thermal Decomposition ◽

Chemical Composition ◽

Ultraviolet Radiation ◽

Thin Layer ◽

Edge Effects ◽

Electron Optics ◽

Surface Layers ◽

Crystalline Orientation ◽

Fluorescent Screen

In this form of electron microscopy, photoelectrons emitted from a metal by ultraviolet radiation are accelerated and imaged onto a fluorescent screen by conventional electron optics. image contrast is determined by spatial variations in the intensity of the photoemission. The dominant source of contrast is due to changes in the photoelectric work function, between surfaces of different crystalline orientation, or different chemical composition. Topographical variations produce a relatively weak contrast due to shadowing and edge effects.Since the photoelectrons originate from the surface layers (e.g. ∼5-10 nm for metals), photoelectron microscopy is surface sensitive. Thus to see the microstructure of a metal the thin layer (∼3 nm) of surface oxide must be removed, either by ion bombardment or by thermal decomposition in the vacuum of the microscope.

Download Full-text

Thermomechanical Treatment of a 4340 Ni-Cr-Mo Alloy Steel

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100098083 ◽

1981 ◽

Vol 39 ◽

pp. 314-315 ◽

Cited By ~ 1

Author(s):

M.T. Jahn ◽

J.C. Yang ◽

C.M. Wan

Keyword(s):

Mechanical Property ◽

Chemical Composition ◽

Alloy Steel ◽

Thermomechanical Treatment ◽

Room Temperature ◽

Good Combination ◽

Thermal Treatments ◽

Low Carbon ◽

4340 Steel ◽

Good Improvement

4340 Ni-Cr-Mo alloy steel is widely used due to its good combination of strength and toughness. The mechanical property of 4340 steel can be improved by various thermal treatments. The influence of thermomechanical treatment (TMT) has been studied in a low carbon Ni-Cr-Mo steel having chemical composition closed to 4340 steel. TMT of 4340 steel is rarely examined up to now. In this study we obtain good improvement on the mechanical property of 4340 steel by TMT. The mechanism is explained in terms of TEM microstructures4340 (0.39C-1.81Ni-0.93Cr-0.26Mo) steel was austenitized at 950°C for 30 minutes. The TMTed specimen (T) was obtained by forging the specimen continuously as the temperature of the specimen was decreasing from 950°C to 600°C followed by oil quenching to room temperature. The thickness reduction ratio by forging is 40%. The conventional specimen (C) was obtained by quenching the specimen directly into room temperature oil after austenitized at 950°C for 30 minutes. All quenched specimens (T and C) were then tempered at 450, 500, 550, 600 or 650°C for four hours respectively.

Download Full-text