Reconciling thermal regimes and tectonics of the early Earth

Geology ◽  
2019 ◽  
Vol 47 (10) ◽  
pp. 923-927 ◽  
Author(s):  
F.A. Capitanio ◽  
O. Nebel ◽  
P.A. Cawood ◽  
R.F. Weinberg ◽  
P. Chowdhury

Abstract Thermomechanical models of mantle convection and melting in an inferred hotter Archean Earth show the emergence of pressure-temperature (P-T) regimes that resemble present-day plate tectonic environments yet developed within a non–plate tectonics regime. The models’ P-T gradients are compatible with those inferred from evolving tonalite-trondhjemite-granodiorite series rocks and the paired metamorphic belt record, supporting the feasibility of divergent and convergent tectonics within a mobilized, yet laterally continuous, lithospheric lid. “Hot” P-T gradients of 10–20 °C km–1 form along asymmetric lithospheric drips, then migrate to areas of deep lithospheric downwelling within ∼300–500 m.y., where they are overprinted by high-pressure warm and, later, cold geothermal signatures, up to ∼8 °C km–1. Comparisons with the crustal production and reworking record suggest that this regime emerged in the Hadean.

2020 ◽  
Author(s):  
Ross N. Mitchell ◽  
Christopher J. Spencer ◽  
Uwe Kirscher ◽  
Simon A. Wilde

<p><strong>Earth’s oldest preserved crustal archive, the Jack Hills zircon of Western Australia, has been controversial to interpret in terms of the onset of plate tectonics. Here we conduct time series analysis on hafnium isotopes of the Jack Hills zircon and reveal an array of statistically significant cycles that are reminiscent of plate tectonics, i.e., subduction. At face value, such cycles may suggest early Earth conditions similar to today—the uniformitarian “day one” hypothesis. On the other hand, in the context of expected secular changes due to planetary evolution and geological observations, the cycles could instead imply that modern plate tectonic subduction inherited convective harmonics already facilitated by an early phase of stagnant-lid delamination—the “lid-to-plates” hypothesis. Either way, any model for the initiation of plate tectonics must begin in Hadean time.</strong></p>


2020 ◽  
Author(s):  
A Alexander G Webb ◽  
Thomas Müller ◽  
Jiawei Zuo ◽  
Peter Haproff ◽  
Anthony Ramírez-Salazar

<p>A major shift in Earth’s crustal generation processes at ~3.2 to 2.5 Ga has been inferred from mineralogical, geological, and geochemical records, particularly those recorded by fine-grained sediments and zircon crystals. The most common hypothesis to explain this shift is the onset of plate tectonic recycling following some form of hot stagnant lid geodynamics. However, all prior detailed geologic studies of our best-preserved Eoarchean terrane, the ~3.85 - 3.60 Ga Isua supracrustal belt of SW Greenland, interpret this site to record terrane collision within the context of plate tectonics. This represents a significant counterweight to the assumption underpinning the ~3 Ga tectonic-mode-change models, i.e., the idea that early Earth’s record is broadly representative. The Isua belt is divided into ~3.8 and ~3.7 Ga halves, and these have been interpreted as plate fragments which collided by ~3.6 Ga. Here, we examine the evidence used to support plate tectonic interpretations, focusing on 1) reanalysis of prior geochronological results and associated cross-cutting relationships which have previously been interpreted to record as many as eight tectonic events, and 2) new field observations leading to reinterpretation of basic structural relationships. Simpler interpretations of the geochronological and deformation data are viable: the belt may have experienced nearly homogeneous metamorphic conditions and strain during a single deformation event prior to intrusion of ~3.5 Ga mafic dikes. Curtain and sheath folds occur at multiple scales throughout the belt, with the entire belt potentially representing Earth’s largest a-type fold. We propose a new model: two cycles of volcanic burial and resultant melting and TTG intrusion produced first the ~3.8 Ga rocks and then the ~3.7 Ga rocks above, after which the whole belt was deformed and thinned in a shear zone, producing the multi-scale a-type folding patterns. The Eoarchean assembly of the Isua supracrustal belt is therefore most simply explained by vertical-stacking volcanic and instrusive processes followed by a single shearing event. In combination with well-preserved Paleoarchean terranes, these rocks record the waning downward advection of lithosphere inherent in volcanism-dominated heat-pipe tectonic models for early Earth. These interpretations are consistent with recent findings that early crust-mantle dynamics are remarkably similar across the solar system’s terrestrial bodies.</p>


Author(s):  
Craig O'Neill ◽  
Simon Turner ◽  
Tracy Rushmer

The development of plate tectonics from a pre-plate tectonics regime requires both the initiation of subduction and the development of nascent subduction zones into long-lived contiguous features. Subduction itself has been shown to be sensitive to system parameters such as thermal state and the specific rheology. While generally it has been shown that cold-interior high-Rayleigh-number convection (such as on the Earth today) favours plates and subduction, due to the ability of the interior stresses to couple with the lid, a given system may or may not have plate tectonics depending on its initial conditions. This has led to the idea that there is a strong history dependence to tectonic evolution—and the details of tectonic transitions, including whether they even occur, may depend on the early history of a planet. However, intrinsic convective stresses are not the only dynamic drivers of early planetary evolution. Early planetary geological evolution is dominated by volcanic processes and impacting. These have rarely been considered in thermal evolution models. Recent models exploring the details of plate tectonic initiation have explored the effect of strong thermal plumes or large impacts on surface tectonism, and found that these ‘primary drivers’ can initiate subduction, and, in some cases, over-ride the initial state of the planet. The corollary of this, of course, is that, in the absence of such ongoing drivers, existing or incipient subduction systems under early Earth conditions might fail. The only detailed planetary record we have of this development comes from Earth, and is restricted by the limited geological record of its earliest history. Many recent estimates have suggested an origin of plate tectonics at approximately 3.0 Ga, inferring a monotonically increasing transition from pre-plates, through subduction initiation, to continuous subduction and a modern plate tectonic regime around that time. However, both numerical modelling and the geological record itself suggest a strong nonlinearity in the dynamics of the transition, and it has been noted that the early history of Archaean greenstone belts and trondhjemite–tonalite–granodiorite record many instances of failed subduction. Here, we explore the history of subduction failure on the early Earth, and couple these with insights from numerical models of the geodynamic regime at the time. This article is part of a discussion meeting issue ‘Earth dynamics and the development of plate tectonics'.


Author(s):  
Bradford J. Foley

For plate tectonics to operate on a planet, mantle convective forces must be capable of forming weak, localized shear zones in the lithosphere that act as plate boundaries. Otherwise, a planet's mantle will convect in a stagnant lid regime, where subduction and plate motions are absent. Thus, when and how plate tectonics initiated on the Earth is intrinsically tied to the ability of mantle convection to form plate boundaries; however, the physics behind this process are still uncertain. Most mantle convection models have employed a simple pseudoplastic model of the lithosphere, where the lithosphere ‘fails’ and develops a mobile lid when stresses in the lithosphere reach the prescribed yield stress. With pseudoplasticity high mantle temperatures and high rates of internal heating, conditions relevant for the early Earth, impede plate boundary formation by decreasing lithospheric stresses, and hence favour a stagnant lid for the early Earth. However, when a model for shear zone formation based on grain size reduction is used, early Earth thermal conditions do not favour a stagnant lid. While lithosphere stress drops with increasing mantle temperature or heat production rate, the deformational work, which drives grain size reduction, increases. Thus, the ability of convection to form weak plate boundaries is not impeded by early Earth thermal conditions. However, mantle thermal state does change the style of subduction and lithosphere mobility; high mantle temperatures lead to a more sluggish, drip-like style of subduction. This ‘sluggish lid’ convection may be able to explain many of the key observations of early Earth crust formation processes preserved in the geologic record. Moreover, this work highlights the importance of understanding the microphysics of plate boundary formation for assessing early Earth tectonics, as different plate boundary formation mechanisms are influenced by mantle thermal state in fundamentally different ways.This article is part of a discussion meeting issue ‘Earth dynamics and the development of plate tectonics’.


2020 ◽  
Author(s):  
Keely A. O'Farrell ◽  
Sean Trim ◽  
Samuel Butler

<p>Numerical models of mantle convection help our understanding of the complex feedback between the plates and deep interior dynamics through space and time. Did the early Earth have plate tectonics, a stagnant lid, or something in between? The surface dynamics of the early Earth remain poorly understood. Current numerical models of mantle convection are constrained by present-day observations, but the behavior of the hotter, early Earth prior to the onset of plate tectonics is less certain. The early Earth may have possessed a large hot magma ocean trapped near the core-mantle boundary after formation during differentiation, and likely containing different elements from the surrounding mantle. We examine how composition-dependent properties in the deep mantle affect convection dynamics and surface mobility in high Rayleigh number models featuring plastic yielding. Our Newtonian models indicate that increased conductivity or decreased viscosity flattens basal topography while also increasing the potential for surface yielding. We vary the viscosity, thermal conductivity, and internal heating in a compositionally distinct basal magma ocean and explore the compositional topography, insulation effects and surface stresses for non-Newtonian rheology. Models are run using a variety of crustal compositions, such as the inclusion of primordial continental material before the onset of plate tectonics. We monitor the surface for plate-like behavior. Since convective vigour is very strong in the early Earth, specialized tracer methods are employed for increased accuracy. In our models, Stokes flow solutions are obtained using a multigrid method specifically designed to handle large viscosity contrasts and non-Newtonian rheology.</p>


Author(s):  
Jun Korenaga

Resolving the modes of mantle convection through Earth history, i.e. when plate tectonics started and what kind of mantle dynamics reigned before, is essential to the understanding of the evolution of the whole Earth system, because plate tectonics influences almost all aspects of modern geological processes. This is a challenging problem because plate tectonics continuously rejuvenates Earth's surface on a time scale of about 100 Myr, destroying evidence for its past operation. It thus becomes essential to exploit indirect evidence preserved in the buoyant continental crust, part of which has survived over billions of years. This contribution starts with an in-depth review of existing models for continental growth. Growth models proposed so far can be categorized into three types: crust-based, mantle-based and other less direct inferences, and the first two types are particularly important as their difference reflects the extent of crustal recycling, which can be related to subduction. Then, a theoretical basis for a change in the mode of mantle convection in the Precambrian is reviewed, along with a critical appraisal of some popular notions for early Earth dynamics. By combining available geological and geochemical observations with geodynamical considerations, a tentative hypothesis is presented for the evolution of mantle dynamics and its relation to surface environment; the early onset of plate tectonics and gradual mantle hydration are responsible not only for the formation of continental crust but also for its preservation as well as its emergence above sea level. Our current understanding of various material properties and elementary processes is still too premature to build a testable, quantitative model for this hypothesis, but such modelling efforts could potentially transform the nature of the data-starved early Earth research by quantifying the extent of preservation bias.This article is part of a discussion meeting issue ‘Earth dynamics and the development of plate tectonics’.


2020 ◽  
Vol 42 (3) ◽  
pp. 271-282
Author(s):  
OLEG IVANOV

The general characteristics of planetary systems are described. Well-known heat sources of evolution are considered. A new type of heat source, variations of kinematic parameters in a dynamical system, is proposed. The inconsistency of the perovskite-post-perovskite heat model is proved. Calculations of inertia moments relative to the D boundary on the Earth are given. The 9 times difference allows us to claim that the sliding of the upper layers at the Earth's rotation speed variations emit heat by viscous friction.This heat is the basis of mantle convection and lithospheric plate tectonics.


Author(s):  
Egor Koemets ◽  
Timofey Fedotenko ◽  
Saiana Khandarkhaeva ◽  
Maxim Bykov ◽  
Elena Bykova ◽  
...  

Author(s):  
Egor Koemets ◽  
Timofey Fedotenko ◽  
Saiana Khandarkhaeva ◽  
Maxim Bykov ◽  
Elena Bykova ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document