Thermal stabilization of the resistive states of superconducting composites: Quasilinear approximation

2017 ◽  
Vol 62 (4) ◽  
pp. 560-568
Author(s):  
V. R. Romanovskii
1999 ◽  
Vol 64 (1) ◽  
pp. 138-148 ◽  
Author(s):  
Miroslav Michvocík ◽  
Dušan Mravec ◽  
Milan Hronec ◽  
Agáta Smiešková ◽  
Pavol Hudec

The influence of thermal stabilization of NH4-Y zeolite and modification of USY zeolites with solutions of hydrochloric acid on the cyclohexylation of naphthalene in the liquid phase was studied. Removal of the part of extra-framework aluminium from zeolite structure has a positive effect on both conversion of naphthalene and amount of dicyclohexylnaphthalenes formed. Modification of zeolites leads to an increase in conversion and selectivity of β-substitution in the naphthalene cyclohexylation.


1995 ◽  
Vol 30 (4) ◽  
pp. 299-303 ◽  
Author(s):  
Vasanthy Arasaratnam ◽  
Kandiah Balasubramaniam

2014 ◽  
Vol 82 (9) ◽  
pp. 1947-1959 ◽  
Author(s):  
Sojin Moon ◽  
Du-kyo Jung ◽  
George N. Phillips ◽  
Euiyoung Bae

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1283
Author(s):  
Ivan Dominguez-Candela ◽  
Jose Miguel Ferri ◽  
Salvador Cayetano Cardona ◽  
Jaime Lora ◽  
Vicent Fombuena

The use of a new bio-based plasticizer derived from epoxidized chia seed oil (ECO) was applied in a poly(lactic acid) (PLA) matrix. ECO was used due to its high epoxy content (6.7%), which led to an improved chemical interaction with PLA. Melt extrusion was used to plasticize PLA with different ECO content in the 0–10 wt.% range. Mechanical, morphological, and thermal characterization was carried out to evaluate the effect of ECO percentage. Besides, disintegration and migration tests were studied to assess the future application in packaging industry. Ductile properties improve by 700% in elongation at break with 10 wt.% ECO content. Field emission scanning electron microscopy (FESEM) showed a phase separation with ECO content equal or higher than 7.5 wt.%. Thermal stabilization was improved 14 °C as ECO content increased. All plasticized PLA was disintegrated under composting conditions, not observing a delay up to 5 wt.% ECO. Migration tests pointed out a very low migration, less than 0.11 wt.%, which is to interest to the packaging industry.


2021 ◽  
Vol 11 (4) ◽  
pp. 1723
Author(s):  
Yuri D. Ivanov ◽  
Tatyana O. Pleshakova ◽  
Ivan D. Shumov ◽  
Andrey F. Kozlov ◽  
Irina A. Ivanova ◽  
...  

Flow-based coiled systems, through which a heat transfer fluid (such as glycerol) is pumped, are widely used for thermal stabilization of bioreactors and biosensor cuvettes and cells. Previously, using horseradish peroxidase (HRP) as a model protein, we have demonstrated that the incubation of a protein solution in a flow-based system over coiled pipe with flowing glycerol leads to a change in the adsorption properties of the protein macromolecules. Herein, we have studied the effect of the glycerol flow on the properties of HRP, the solution of which was placed differently: i.e., near either the inflow or the outflow linear sections of the pipe, while the coiled section of the pipe was shielded with a grounded metallic cover. Atomic force microscopy (AFM) has been employed in order to visualize the HRP protein macromolecules adsorbed from its solution onto the mica substrate surface. The quantity of adsorbed protein was estimated based on the AFM data. The enzymatic activity of HRP was estimated by spectrophotometry. We demonstrate that a change in the properties of HRP enzyme was observed after the incubation of its solution near the inflow/outflow linear sections of the pipe with flowing glycerol. Namely, after the incubation of HRP solution near the inflow section, a decrease in the protein adsorption onto mica was observed, but its enzymatic activity remained unchanged in comparison to the control sample. In another case, when the HRP solution was incubated near the outflow section, an increased protein adsorption was observed, while the enzyme exhibited considerably lower activity.


2021 ◽  
Vol 11 (10) ◽  
pp. 4667
Author(s):  
Dariusz Heim ◽  
Anna Wieprzkowicz ◽  
Dominika Knera ◽  
Simo Ilomets ◽  
Targo Kalamees ◽  
...  

The main goal of the paper was to numerically analyse the risk of overheating of the Energy Activated External Thermal Insulation Composite System (En-ActivETICS) as an example of Building Integrated Photovoltaics (BIPV). The analyses were conducted with the coupled power flow method (thermal and electrical) for 20 European cities. All locations were analysed considering the local climate in the context of building performance simulation as well as electricity production. The obtained results allowed for the determination of the risk of overheating, which can influence system durability, accelerated thermal ageing, and overall performance. It was revealed that the risk of overheating above 80 °C is possible in almost all locations; however, the intensity considerably differs between southern and northern Europe. The effect of latent heat storage for better thermal stabilization and overall performance was determined numerically for all locations. Finally, the improved solution with a phase change material (PCM) layer beside the PV panel was proposed individually for specific climatic zones, considering the required heat capacity. The maximum panel temperature for improved En-ActivETICS does not exceed 85 °C for any location.


Sign in / Sign up

Export Citation Format

Share Document