scholarly journals A comparison of greenhouse gas emissions in the residential sector of major Canadian cities

2014 ◽  
Vol 41 (4) ◽  
pp. 285-293 ◽  
Author(s):  
Eugene A. Mohareb ◽  
Adrian K. Mohareb
Keyword(s):  
Greenhouse Gas ◽  
Energy Demand ◽  
Energy Use ◽  
Housing Stock ◽  
Ghg Emissions ◽  
Residential Building ◽  
Carbon Intensity ◽  
Building Stock ◽  
Residential Sector ◽  
Residential Building Stock

One of the most significant sources of greenhouse gas (GHG) emissions in Canada is the buildings sector, with over 30% of national energy end-use occurring in buildings. Energy use must be addressed to reduce emissions from the buildings sector, as nearly 70% of all Canada’s energy used in the residential sector comes from fossil sources. An analysis of GHG emissions from the existing residential building stock for the year 2010 has been conducted for six Canadian cities with different climates and development histories: Vancouver, Edmonton, Winnipeg, Toronto, Montreal, and Halifax. Variation across these cities is seen in their 2010 GHG emissions, due to climate, characteristics of the building stock, and energy conversion technologies, with Halifax having the highest per capita emissions at 5.55 tCO2e/capita and Montreal having the lowest at 0.32 tCO2e/capita. The importance of the provincial electricity grid’s carbon intensity is emphasized, along with era of construction, occupancy, floor area, and climate. Approaches to achieving deep emissions reductions include innovative retrofit financing and city level residential energy conservation by-laws; each region should seek location-appropriate measures to reduce energy demand within its residential housing stock, as well as associated GHG emissions.

scholarly journals Evaluating Energy Demand and Energy Efficiency Programs in Saudi Residential Buildings

2021 ◽  
Author(s):  
Mohammad Aldubyan ◽  
Moncef Krarti ◽  
Eric Williams
Keyword(s):  
Energy Efficiency ◽  
Energy Demand ◽  
Housing Stock ◽  
Residential Buildings ◽  
Residential Building ◽  
Residential Energy ◽  
Building Stock ◽  
Residential Building Stock ◽  
The Impact ◽  
Existing Housing

This paper describes the development of the Residential Energy Model (REEM) for Saudi Arabia using an engineering bottom-up approach. The model can assess energy demand for the current residential building stock and the impact of energy efficiency and demand-side management programs. It accounts for the makeup and features of the Kingdom’s existing housing stock using 54 prototypes of residential buildings defined by three building types, three vintages, and six locations representing different climatic zones.

Energy Saving Policies for Housing Based on Wrong Assumptions?

2014 ◽  
Vol 39 (2) ◽  
pp. 78-83
Author(s):  
Henk Visscher ◽  
Dasa Majcen ◽  
Laure Itard
Keyword(s):  
Energy Saving ◽  
Energy Demand ◽  
Energy Use ◽  
Housing Stock ◽  
Energy Performance ◽  
Research Projects ◽  
Building Stock ◽  
Energy Saving Potential ◽  
Energy Performance Of Buildings ◽  
New Buildings

The energy saving potential of the building stock is large and considered to be the most cost efficient to contribute to the CO2 reduction ambitions. Severe governmental policies steering on reducing the energy use seem essential to stimulate and enforce the improvement of the energy performance of buildings with a focus on reducing the heating and cooling energy demand. In Europe the Energy Performance of Buildings Directive is a driving force for member states to develop and strengthen energy performance regulations for new buildings and energy certificates for the building stock. The goals are to build net zero energy new buildings in 2020 and to reach a neutral energy situation in the whole stock by 2050. More and more research projects deliver insight that the expected impact of stricter regulations for newly built houses is limited and the actual effects of energy savings through housing renovations stay behind the expectations. Theoretical energy use calculated on base of the design standard for new houses and assessment standards for Energy Performance Certificates of existing dwellings differ largely from the measured actual energy use. The paper uses the findings of some Post Occupancy Evaluation research projects. Is the energy saving potential of the housing stock smaller than expected and should we therefore change the policies?

scholarly journals The Electrification of Cooking Methods in Korea—Impact on Energy Use and Greenhouse Gas Emissions

Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 680 ◽  
Author(s):  
Hyunji Im ◽  
Yunsoung Kim
Keyword(s):  
Power Generation ◽  
Greenhouse Gas ◽  
Energy Demand ◽  
Energy Use ◽  
Ghg Emissions ◽  
Population Increase ◽  
Cooking Methods ◽  
Building Sector ◽  
Housing Complex ◽  
The Impact

The electrification of cooking methods in Korea was investigated to understand the impact of different cooking methods on energy use and greenhouse gas (GHG) emissions in the building sector. Annual household cooking energy consumption was compared for the Nowon Energy Zero House Project, a zero-energy housing complex using induction cooktops, and a sample of households that used natural gas for cooking. The results showed that the former consumed less calories (a difference of 2.2 times) and emitted less GHGs (a difference of 2.6 times) compared to gas cooking households. A countrywide scenario analysis was conducted by combining the share of electric cooking households with the projected power generation mix in 2030. Under the 2030 Policy scenario for power generation, and with an electricity cooking share of 20%, cooking-related GHG emissions were projected to be 3.79 million t CO2/year; 3.8% (150,000 t CO2/year) lower than those in the present day, despite a total population increase. The electrification of cooking methods in Korea has the potential to reduce both the energy demand of the building sector and GHG emissions, in synergy with the decarbonization of the power generation sector.

scholarly journals Selection of Favourable Concept of Energy Retrofitting Solution for Social Housing in the Czech Republic Based on Economic Parameters, Greenhouse Gases, and Primary Energy Consumption

2019 ◽  
Vol 11 (22) ◽  
pp. 6482
Author(s):  
Katerina Sojkova ◽  
Martin Volf ◽  
Antonin Lupisek ◽  
Roman Bolliger ◽  
Tomas Vachal
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Residential Buildings ◽  
Residential Building ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Building Stock ◽  
Gas Emissions ◽  
Residential Building Stock

Energy retrofitting of existing building stock has significant potential for the reduction of energy consumption and greenhouse gas emissions. Roughly half of the CO2 emissions from Czech building stock are estimated to be allocated to residential buildings. Approximately one-third of the Czech residential building stock have already been retrofitted, but retrofitting mostly takes place in large cities due to greater income. A favourable concept for the mass retrofitting of residential building stock, affordable even in low-income regions, was of interest. For a reference building, multi-criteria assessment of numerous retrofitting measures was performed. The calculation involved different building elements, materials, solutions, and energy-efficiency levels in combination with various heating systems. The assessment comprised environmental impact, represented by operational and embodied primary energy consumption and greenhouse gas emissions, and investment and operational costs using the annuity method. Analysis resulted in the identification of favourable retrofitting measures and showed that complex building retrofitting is advantageous from both a cost and an environmental point of view. The environmental burden could be decreased by approximately 10–30% even without photovoltaic installation, and costs per year could be decreased by around 40%.

scholarly journals Energy Retrofitting Effects on the Energy Flexibility of Dwellings

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2788 ◽  
Author(s):  
Francesco Mancini ◽  
Benedetto Nastasi
Keyword(s):  
Energy Demand ◽  
Production Systems ◽  
Residential Building ◽  
Energy Transition ◽  
Cost Effective ◽  
Heat Pumps ◽  
Building Envelope ◽  
Hot Water ◽  
Building Stock ◽  
Residential Building Stock

Electrification of the built environment is foreseen as a main driver for energy transition for more effective, electric renewable capacity firming. Direct and on-time use of electricity is the best way to integrate them, but the current energy demand of residential building stock is often mainly fuel-based. Switching from fuel to electric-driven heating systems could play a key role. Yet, it implies modifications in the building stock due to the change in the temperature of the supplied heat by new heat pumps compared to existing boilers and in power demand to the electricity meter. Conventional energy retrofitting scenarios are usually evaluated in terms of cost-effective energy saving, while the effects on the electrification and flexibility are neglected. In this paper, the improvement of the building envelope and the installations of electric-driven space heating and domestic hot water production systems is analyzed for 419 dwellings. The dwellings database was built by means of a survey among the students attending the Faculty of Architecture at Sapienza University of Rome. A set of key performance indicators were selected for energy and environmental performance. The changes in the energy flexibility led to the viable participation of all the dwellings to a demand response programme.

scholarly journals Energy, Seismic, and Architectural Renovation of RC Framed Buildings with Prefabricated Timber Panels

2020 ◽  
Vol 12 (12) ◽  
pp. 4845 ◽  
Author(s):  
Giuseppe Margani ◽  
Gianpiero Evola ◽  
Carola Tardo ◽  
Edoardo Michele Marino
Keyword(s):  
Energy Demand ◽  
Residential Building ◽  
Seismic Energy ◽  
Energy Performance ◽  
Building Stock ◽  
Repair Costs ◽  
Residential Building Stock ◽  
Design Deficiencies ◽  
The 1960S ◽  
Energy Dissipation Devices

In seismic European countries most of the residential building stock is highly energy-intensive and earthquake-prone because it was built before the enforcement of the most recent energy and seismic codes. Furthermore, this stock often shows a low architectural quality due to poor maintenance and/or construction and design deficiencies: for all these reasons, it needs deep renovation, but the use of common energy and seismic upgrading techniques is often unsustainable in terms of costs, work duration, and occupants’ disturbance. Therefore, new integrated, affordable, fast, and low-disruptive renovation actions are strongly needed. This study proposes an innovative energy, seismic, and architectural renovation solution for reinforced concrete (RC) framed buildings, based on the addition of cross-laminated timber (CLT) panels to the outer walls, in combination with wooden-framed panels. The two panels integrate insulation and cladding materials in order to improve the energy performance and the architectural image of the renovated building. Moreover, the CLT panels are connected to the existing RC frame through innovative seismic energy dissipation devices. In case of an earthquake, these devices in combination with the CLT panels reduce the drift demand of the building, preventing or reducing structural damages and consequent repair costs. In particular, this paper investigates the technical feasibility, the energy efficiency, and the architectural enhancement of the proposed retrofitting system. To this purpose, dynamic thermal simulations were conducted on a typical multi-story residential building from the 1960s, located in Catania, Italy. The results indicated that this retrofitting technique considerably improved the energy performance of the selected building, with a reduction of the global energy demand up to nearly 60%. The presented study is part of a larger research project aimed at also investigating, in a further stage, the seismic performance achievable by the above-mentioned renovation solution.

scholarly journals Classification of Heritage Residential Building Stock and Defining Sustainable Retrofitting Scenarios in Khedivial Cairo

2021 ◽  
Vol 13 (2) ◽  
pp. 880
Author(s):  
Hanan S.S. Ibrahim ◽  
Ahmed Z. Khan ◽  
Shady Attia ◽  
Yehya Serag
Keyword(s):  
Cultural Values ◽  
Energy Use ◽  
Residential Building ◽  
Three Dimensions ◽  
Building Stock ◽  
Significance Level ◽  
Existing Building ◽  
Significance Levels ◽  
Residential Building Stock ◽  
Heritage Building

This study aims to develop an integrated classification methodology for retrofitting that preserves both energy use and cultural value aspects in hot climates, especially, in North Africa, as a hot zone, which lacks retrofitting initiatives of built heritage. Despite the number of existing methods of classification for energy purposes, little attention has been paid to integrate the perceptions of cultural values in those methods. The proposed methodology classifies heritage building stocks based on building physical characteristics, as well as heritage significance levels, and then later integrates the outcomes into a matrix to propose sustainable retrofitting scenarios based on three dimensions, i.e., heritage value locations, types, and heritage significance level. For validation, the methodology was applied to the heritage residential building stock along with a microscale analysis on a building in Khedivial Cairo, Egypt. The findings include extracting twelve building classes, providing a reference building for each class, and a detailed catalogue of the extracted reference buildings that includes retrofitting scenarios for creating energy models. The originality of this work lies in integrating cultural values in a building classification methodology and providing a list of sustainable retrofitting scenarios for reference buildings. The findings contribute to fill the gap in existing building classifications, more specifically in hot climates.

scholarly journals Strategies for Practical Greenhouse Gas Reductions in the Existing Building Stock

2009 ◽  
Vol 4 (1) ◽  
pp. 135-145
Author(s):  
John Shiel
Keyword(s):  
Greenhouse Gas ◽  
Best Practice ◽  
Market Failure ◽  
Energy Use ◽  
Ghg Emissions ◽  
Building Stock ◽  
Existing Building ◽  
Effective Strategies ◽  
Significant Contributor ◽  
Recent Project

The Stern Report found that Climate Change is the world's greatest market failure, and the United Nations concluded it is likely to be the most significant environmental challenge of our time. This paper aims to illustrate building Greenhouse Gas (GHG) and energy trends, and to provide practical strategies and best practice examples in international low- and high-rise building refurbishments to lower GHG emissions, energy use and operating costs, across building types and Australian Climate Zones. These can be adopted by policy-makers, owners, investors and occupiers. It also aims to provide examples of government policies and important stakeholder behaviour to reduce GHGs, and evaluates one recent project for strategies that proved successful and those that could be improved. The method used was to review international strategies that lower building GHG emissions in countries with more advanced building regulations than Australia, and to discover affordable and effective strategies from associations that publicise case studies. This paper shows that the operational phase of buildings is a significant contributor to global GHG emissions; that Passive building refurbishments are current best practice strategies; and that occupant behaviour is another surprisingly significant contributor to GHG emissions. The paper forms part of the author's higher research degree literature review.

Sign in / Sign up

Export Citation Format

Share Document