scholarly journals Selection of Favourable Concept of Energy Retrofitting Solution for Social Housing in the Czech Republic Based on Economic Parameters, Greenhouse Gases, and Primary Energy Consumption

2019 ◽  
Vol 11 (22) ◽  
pp. 6482
Author(s):  
Katerina Sojkova ◽  
Martin Volf ◽  
Antonin Lupisek ◽  
Roman Bolliger ◽  
Tomas Vachal
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Residential Buildings ◽  
Residential Building ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Building Stock ◽  
Gas Emissions ◽  
Residential Building Stock

Energy retrofitting of existing building stock has significant potential for the reduction of energy consumption and greenhouse gas emissions. Roughly half of the CO2 emissions from Czech building stock are estimated to be allocated to residential buildings. Approximately one-third of the Czech residential building stock have already been retrofitted, but retrofitting mostly takes place in large cities due to greater income. A favourable concept for the mass retrofitting of residential building stock, affordable even in low-income regions, was of interest. For a reference building, multi-criteria assessment of numerous retrofitting measures was performed. The calculation involved different building elements, materials, solutions, and energy-efficiency levels in combination with various heating systems. The assessment comprised environmental impact, represented by operational and embodied primary energy consumption and greenhouse gas emissions, and investment and operational costs using the annuity method. Analysis resulted in the identification of favourable retrofitting measures and showed that complex building retrofitting is advantageous from both a cost and an environmental point of view. The environmental burden could be decreased by approximately 10–30% even without photovoltaic installation, and costs per year could be decreased by around 40%.

scholarly journals TOPOI RESOURCES: Quantification and Assessment of Global Warming Potential and Land-Uptake of Residential Buildings in Settlement Types along the Urban–Rural Gradient—Opportunities for Sustainable Development

2021 ◽  
Vol 13 (8) ◽  
pp. 4099
Author(s):  
Ann-Kristin Mühlbach ◽  
Olaf Mumm ◽  
Ryan Zeringue ◽  
Oskars Redbergs ◽  
Elisabeth Endres ◽  
...  
Keyword(s):  
Sustainable Development ◽  
Global Warming ◽  
Energy Consumption ◽  
Global Warming Potential ◽  
Residential Buildings ◽  
Residential Building ◽  
Negative Effects ◽  
Building Stock ◽  
Residential Building Stock ◽  
Urban Rural

The METAPOLIS as the polycentric network of urban–rural settlement is undergoing constant transformation and urbanization processes. In particular, the associated imbalance of the shrinkage and growth of different settlement types in relative geographical proximity causes negative effects, such as urban sprawl and the divergence of urban–rural lifestyles with their related resource, land and energy consumption. Implicitly related to these developments, national and global sustainable development goals for the building sector lead to the question of how a region can be assessed without detailed research and surveys to identify critical areas with high potential for sustainable development. In this study, the TOPOI method is used. It classifies settlement units and their interconnections along the urban–rural gradient, in order to quantify and assess the land-uptake and global warming potential driven by residential developments. Applying standard planning parameters in combination with key data from a comprehensive life cycle assessment of the residential building stock, a detailed understanding of different settlement types and their associated resource and energy consumption is achieved.

scholarly journals Energy Consumption and Greenhouse Gas Emissions of Nickel Products

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5664
Author(s):  
Wenjing Wei ◽  
Peter B. Samuelsson ◽  
Anders Tilliander ◽  
Rutger Gyllenram ◽  
Pär G. Jönsson
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Process Model ◽  
Ghg Emissions ◽  
Primary Energy ◽  
Nickel Metal ◽  
Gas Emissions ◽  
Nickel Smelting ◽  
Ore Grade

The primary energy consumption and greenhouse gas emissions from nickel smelting products have been assessed through case studies using a process model based on mass and energy balance. The required primary energy for producing nickel metal, nickel oxide, ferronickel, and nickel pig iron is 174 GJ/t alloy (174 GJ/t contained Ni), 369 GJ/t alloy (485 GJ/t contained Ni), 110 GJ/t alloy (309 GJ/t contained Ni), and 60 GJ/t alloy (598 GJ/t contained Ni), respectively. Furthermore, the associated GHG emissions are 14 tCO2-eq/t alloy (14 tCO2-eq/t contained Ni), 30 t CO2-eq/t alloy (40 t CO2-eq/t contained Ni), 6 t CO2-eq/t alloy (18 t CO2-eq/t contained Ni), and 7 t CO2-eq/t alloy (69 t CO2-eq/t contained Ni). A possible carbon emission reduction can be observed by comparing ore type, ore grade, and electricity source, as well as allocation strategy. The suggested process model overcomes the limitation of a conventional life cycle assessment study which considers the process as a ‘black box’ and allows for an identification of further possibilities to implement sustainable nickel production.

Towards zero-energy residential complexes in high-density conditions

2020 ◽  
pp. 1420326X2096216
Author(s):  
Olga Kolodiy ◽  
Guedi Capeluto
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Energy Use ◽  
Residential Buildings ◽  
Zero Energy ◽  
Simple Task ◽  
Gas Emissions ◽  
Human Footprint ◽  
The One

Carbon dioxide is the largest component of the human footprint and one of the major components of all greenhouse gases. The expected increase in population will lead to growth in energy consumption and greenhouse gas emissions. The building industry has the highest potential for reducing greenhouse gas emissions. Therefore, buildings should become not only efficient consumers but also energy producers, not a simple task in dense cities. The paper describes the feasibility and limitations of near zero energy design in highly dense urban conditions. The study was carried out by examination and comparison of various density design, alternatives of an existing urban plot in the coastal climate zone of Israel. Increased dwelling units’ number leads to higher total energy use on the one hand and mutual shading of new high-rise residential buildings on the other. Preserving solar rights for PV systems installation become more complex. The relation between urban density and solar rights in urban design, energy consumption and energy generation within plot borders and their implications are presented and discussed in the paper.

scholarly journals Exploring the Energy Implication of Urban Density in Residential Buildings

2017 ◽  
Vol 7 (1) ◽  
pp. 7-14 ◽  
Author(s):  
Soufiane Boukarta ◽  
Ewa Berezowska
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Pearson Correlation ◽  
Residential Building ◽  
Holistic Approach ◽  
Building Stock ◽  
Urban Density ◽  
Spatial Approach ◽  
Residential Building Stock ◽  
Gas Consumption

AbstractIn the context of the Algerian energy policy, and through the review of the Algiers’ residential building stock, this paper explores the correlation between the energy consumption of gas and electricity with urban density. Based on a holistic approach of the 57 Algiers’ municipalities, the analysis is organized in two ways. Firstly, the spatial approach is conducted within a GIS implementation, carried out based on the 2013 aggregated annual energy consumption data. The cross analysis of Electricity and Gas consumption and density of population within a GIS spatial distribution approach shows effectively a strong correlation between urban density and energy consumption with a Pearson correlation of −56% and −65% of the Electricity and Gas consumption in the urban municipalities, respectively. Also, the household located in the suburban municipalities consume clearly more energy than the urban centered ones. Based on the electricity and gas consumption, density and carbon footprint we have clustered, within a PCA, the Algiers’ municipalities into three profiles: the “thrifty”, the “intermediate” and the “wasteful” profile.

scholarly journals Review of Constructions and Materials Used in Swedish Residential Buildings during the Post-War Peak of Production

Buildings ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 99
Author(s):  
Björn Berggren ◽  
Maria Wall
Keyword(s):  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Energy Use ◽  
Lightweight Concrete ◽  
Residential Buildings ◽  
Technical Documentation ◽  
Clay Brick ◽  
Building Stock ◽  
Gas Emissions ◽  
Existing Building

One of the greatest challenges for the world today is the reduction of greenhouse gas emissions. As buildings contribute to almost a quarter of the greenhouse gas emissions worldwide, reducing the energy use of the existing building stock is an important measure for climate change mitigation. In order to increase the renovation pace, there is a need for a comprehensive technical documentation that describes different types of buildings in the existing building stock. The purpose of this study is to analyse and describe existing residential buildings in Sweden. The data are based on published reports from 1967 to 1994 that have not been publicly available in a database for other researchers to study until now. Data from the reports have been transferred to a database and analysed to create a reference for buildings and/or a description of building typology in Sweden. This study found that there is a rather large homogeneity in the existing residential building stock. However, it is not possible to use a single reference building or building technique to cover the majority of the existing buildings. In Sweden, common constructions for exterior walls in multi-dwelling buildings which should be used for further studies are insulated wood infill walls with clay brick façades, lightweight concrete walls with rendered façades and concrete sandwich walls. The most common constructions for one- and two-dwelling buildings are insulated wooden walls with clay brick façades or wooden façades. Furthermore, roof constructions with insulated tie beam and roof constructions where the tie beam is a part of the interior floor slab are frequently used and should be included in further studies.

Analysing Nexus between Economic Growth, GHG Emissions, and Energy Consumption for India

2021 ◽  
Vol 17 (1) ◽  
pp. 1-16
Author(s):  
Asim Hasan ◽  
Rahil Akhtar Usmani
Keyword(s):  
Economic Growth ◽  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Carbon Emissions ◽  
Series Data ◽  
Gas Emissions ◽  
Current Time ◽  
Causal Influence ◽  
Integration Test

Rising greenhouse gas emissions is an important issue of the current time. India’s massive greenhouse gas emissions is ranked third globally. The escalating energy demand in the country has opened the gateway for further increase in emissions. Recent studies suggest strong nexus between energy consumption, economic growth, and carbon emissions. This study has the objective to empirically test the aforementioned interdependencies. The co-integration test and multivariate vector error correction model (VECM) are used for the analysis and the Granger Causality test is used to establish the direction of causality. The time-series data for the period of 1971–2011 is used for the analysis. The results of the study confirm strong co-integration between variables. The causality results show that economic growth exerts a causal influence on carbon emissions, energy consumption exerts a causal influence on economic growth, and carbon emissions exert a causal influence on economic growth. Based on the results, the study suggests a policy that focuses on energy conservation and gradual replacement of fossil fuels with renewable energy sources, which would be beneficial for the environment and the society.

Sign in / Sign up

Export Citation Format

Share Document