Physical properties of osmium dinitride with fluorite, pyrite, marcasite, and monoclinic structures under high pressure: First-principles study

2015 ◽  
Vol 93 (4) ◽  
pp. 424-433 ◽  
Author(s):  
Ni-Na Ge ◽  
Yong-Kai Wei ◽  
Jia-Jin Tan ◽  
Guang-Fu Ji ◽  
Yan Cheng

The structure, phase transition, elastic, and thermodynamic properties of OsN2 have been studied via first-principles calculations. It is shown that the CoSb2 structure is more stable than other structures. By the calculated H-P relations at 0 K, we found that the phase transition of OsN2 from CoSb2 structure to marcasite structure (ε → δ) occurs at 16.8 GPa, while the phase transition pressure between pyrite structure and fluorite structure (γ → α) is 80 GPa. The results of obtained phase transitions are also confirmed by bond length, sound velocity, and thermal expansion coefficient under different pressures. The pressure dependences of the elastic constants, mechanical stability, and mechanical anisotropy of four structures of OsN2 have been investigated by finding that the fluorite (pyrite and marcasite) structure OsN2 is mechanically stable under hydrostatic pressure (up to 60 GPa). However, the monoclinic structure is mechanically unstable under pressure from 0 to 60 Gpa. The calculated elastic anisotropic factors show that OsN2 possesses high elastic anisotropy under pressure. Moreover, the calculations on total density of states show that OsN2 of different structures has a metallic character, in agreement with previous theoretical results. The thermodynamic properties and sound velocity under diverse pressures of OsN2 of the four structures have been also investigated successfully.

RSC Advances ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 3058-3070
Author(s):  
Yu Zhou ◽  
Lan-Ting Shi ◽  
A-Kun Liang ◽  
Zhao-Yi Zeng ◽  
Xiang-Rong Chen ◽  
...  

The structures, phase transition, mechanical stability, electronic structures, and thermodynamic properties of lanthanide phosphates (LaP and LaAs) are studied in the pressure range of 0 to 100 GPa by first principles.


2020 ◽  
Vol 34 (25) ◽  
pp. 2050220
Author(s):  
Yingying Chen ◽  
Xilong Dou ◽  
Wenjie Zhu ◽  
Gang Jiang ◽  
Aijie Mao

The structures with different compositions of the binary Mg–Y alloys have been predicted by first-principles calculations combined with an unbiased Crystal structure Analysis by Particle Swarm Optimization (CALYPSO) structure searching method. The two already known stoichiometries alloys of Mg1Y1 with Pm-[Formula: see text] symmetry and Mg3Y1 with Fm-[Formula: see text] are confirmed, and a new stoichiometry alloy of Mg1Y3 with [Formula: see text] symmetry is proposed. The dynamical and mechanical stabilities for the three alloys at different pressures are investigated by phonon spectra and mechanical stability criteria, respectively. Subsequently, the bulk modulus, shear modulus, Young’s modulus, the brittleness/ductile behavior, the elastic anisotropy as well as Vickers hardness for the three alloys at 0 GPa are discussed in detail. The results show that the Mg1Y1, Mg3Y1 and Mg1Y3 alloys improve the hardness and stiffness compared with pure Mg, and Mg1Y3 alloy is of the best ductility in the three alloys. Meanwhile, the three alloys exhibit anisotropic. Moreover, the thermodynamic properties, such as Debye temperature, heat capacity at constant volume, entropy and Helmholtz free energy for the three stable alloys, are predicted and discussed.


Author(s):  
Bo Li ◽  
Weiyi Ren

The phase transition of zinc sulfide (ZnS) from Zinc-blende (ZB) to a rocksalt (RS) structure and the elastic, thermodynamic properties of the two structures under high temperature and pressure are investigated by first-principles study based on the pseudo-potential plane-wave density functional theory (DFT) combined with the quasi-harmonic Debye model. The lattice constant [Formula: see text], bulk modulus [Formula: see text] and the pressure derivative of bulk modulus [Formula: see text]’ of the two structures are calculated. The results are in good agreement with experimental results and the other theoretical data. From the energy–volume curve, enthalpy equal principle and mechanical stability criterion, the transition pressures from the ZB to the RS structure are 16.83, 16.96 and 16.61 GPa, respectively. The three results and the experimental values 14.7–18.1, 16 GPa are very close to each other. Then the elastic properties are also calculated under the pressure ranging from 0 to 30 GPa. Finally, through the quasi-harmonic Debye model, the thermodynamic properties dependence of temperature and pressure in the ranges between 0–1600 K and 0–30 GPa are obtained successfully.


2015 ◽  
Vol 93 (4) ◽  
pp. 409-412 ◽  
Author(s):  
Wen Huang ◽  
Lijun Yang

The electronic, mechanical, and thermodynamic properties of europium carbide (EuC2) are investigated using first-principles density functional theory within the generalized gradient approximation. The calculated elastic constants indicate that EuC2 is mechanically stable. The shear modulus, Young’s modulus, Poisson’s ratio, the bulk modulus – shear modulus ratio, shear anisotropy, and elastic anisotropy are also calculated. Finally, we obtain the Vickers hardness, averaged sound velocity, longitudinal sound velocity, transverse sound velocity, Debye temperature, melting point, and thermal conductivity of EuC2.


2013 ◽  
Vol 401-403 ◽  
pp. 660-662
Author(s):  
Zhi Jian Fu ◽  
Li Jun Jia ◽  
Wei Long Quan

The lattice parameters, phase transition, and thermodynamic properties of OsN2in pyrite and fluorite structure are investigated by first-principles calculations. The pressure and temperature induced phase transitions of OsN2from fluorite structure to pyrite structure have been obtained. It is found that the transition pressure of OsN2at zero temperature is 158.2 GPa, and there exists no transition temperature. In addition, the thermal expansion, the Debye temperature, and the Grüneisen parameter in diverse pressures and temperatures about these two structures have also been obtained. Key words: transition phase; thermodynamic properties; OsN2PACS numbers: 71.15.Mb, 64.70.Kb


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
GuoWei Zhang ◽  
Chao Xu ◽  
MingJie Wang ◽  
Ying Dong ◽  
FengEr Sun ◽  
...  

AbstractFirst principle calculations were performed to investigate the structural, mechanical, electronic properties, and thermodynamic properties of three binary Mg–B compounds under pressure, by using the first principle method. The results implied that the structural parameters and the mechanical properties of the Mg–B compounds without pressure are well matched with the obtainable theoretically simulated values and experimental data. The obtained pressure–volume and energy–volume revealed that the three Mg–B compounds were mechanically stable, and the volume variation decreases with an increase in the boron content. The shear and volume deformation resistance indicated that the elastic constant Cij and bulk modulus B increased when the pressure increased up to 40 GPa, and that MgB7 had the strongest capacity to resist shear and volume deformation at zero pressure, which indicated the highest hardness. Meanwhile, MgB4 exhibited a ductility transformation behaviour at 30 GPa, and MgB2 and MgB7 displayed a brittle nature under all the considered pressure conditions. The anisotropy of the three Mg–B compounds under pressure were arranged as follows: MgB4 > MgB2 > MgB7. Moreover, the total density of states varied slightly and decreased with an increase in the pressure. The Debye temperature ΘD of the Mg–B compounds gradually increased with an increase in the pressure and the boron content. The temperature and pressure dependence of the heat capacity and the thermal expansion coefficient α were both obtained on the basis of Debye model under increased pressure from 0 to 40 GPa and increased temperatures. This paper brings a convenient understanding of the magnesium–boron alloys.


Sign in / Sign up

Export Citation Format

Share Document