The kinetics of the reaction of N,N-dimethyl-2-phenylaziridinium ion with bovine erythrocyte acetylcholinesterase

1970 ◽  
Vol 48 (3) ◽  
pp. 244-250 ◽  
Author(s):  
Jocelyn E. Purdie ◽  
R. M. Heggie
Keyword(s):  
Rate Constant ◽  
Order Rate Constant ◽  
Bovine Erythrocyte ◽  
Acidic Group ◽  
Ph Values ◽  
Order Rate ◽  
Decreasing Ph ◽  
Ph Range ◽  
Kinetics Of ◽  
Hydrolysis Of

The kinetics of the hydrolysis of N,N-dimethyl-2-phenylaziridinium ion (DPA) have been studied over the pH range 5.5–8.0 as have the kinetics of the interaction of DPA with bovine erythrocyte acetyl-cholinesterase. The enzyme is initially inhibited reversibly and subsequently irreversibly towards acetylcholine hydrolysis. The hydrolysis of DPA was found to be pH independent over the range studied while the reversible noncompetitive inhibition increased with increasing pH, the data suggesting the requirement for a basic group on the enzyme with a pKa of about 6.5.Between pH values of 6.0 and 8.0 the kinetics of the irreversible inhibition are consistent with either of two kinetically indistinguishable mechanisms, one involving transformation of the initial reversible complex and the other an independent attack on the uncomplexed enzyme. The first mechanism gives rise to a first-order rate constant which is comparable with that for the hydrolysis of DPA but which increases with decreasing pH; an acidic group on the enzyme with pKa between 6.0 and 7.0 may be involved. The second-order rate constant arising from the second treatment goes through a maximum at pH 7.3. At pH 5.5 the kinetics are not consistent with either mechanism.

Oxidation of Nickel(II) and Manganese(II) by Peroxodisulfate in Aqueous Solution in the Presence of Molybdate. Crystal Structure of the (NH4)6[NiMo9O32].6H2O Product

1992 ◽  
Vol 45 (12) ◽  
pp. 1943 ◽  
Author(s):  
SJ Dunne ◽  
RC Burns ◽  
GA Lawrance
Keyword(s):  
Rate Constant ◽  
Linear Dependence ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Order ◽  
Oxidant Concentration ◽  
Ph Range ◽  
Kinetics Of

Oxidation of Ni2+,aq, by S2O82- to nickel(IV) in the presence of molybdate ion, as in the analogous manganese system, involves the formation of the soluble heteropolymolybdate anion [MMogO32]2- (M = Ni, Mn ). The nickel(IV) product crystallized as (NH4)6 [NiMogO32].6H2O from the reaction mixture in the rhombohedra1 space group R3, a 15.922(1), c 12.406(1) � ; the structure was determined by X-ray diffraction methods, and refined to a residual of 0.025 for 1741 independent 'observed' reflections. The kinetics of the oxidation were examined at 80 C over the pH range 3.0-5.2; a linear dependence on [S2O82-] and a non-linear dependence on l/[H+] were observed. The influence of variation of the Ni/Mo ratio between 1:10 and 1:25 on the observed rate constant was very small at pH 4.5, a result supporting the view that the precursor exists as the known [NiMo6O24H6]4- or a close analogue in solution. The pH dependence of the observed rate constant at a fixed oxidant concentration (0.025 mol dm-3) fits dequately to the expression kobs = kH [H+]/(Ka+[H+]) where kH = 0.0013 dm3 mol-1 s-1 and Ka = 4-0x10-5. The first-order dependence on peroxodisulfate subsequently yields a second-order rate constant of 0.042 dm3 mol-1 s-1. Under analogous conditions, oxidation of manganese(II) occurs eightfold more slowly than oxidation of nickel(II), whereas oxidation of manganese(II) by peroxomonosulfuric acid is 16-fold faster than oxidation by peroxodisulfate under similar conditions.

Kinetics of reconstitution of apotyrosinase by copper

1990 ◽  
Vol 68 (2) ◽  
pp. 476-479
Author(s):  
Donald C. Wigfield ◽  
Douglas M. Goltz
Keyword(s):  
Rate Constant ◽  
Copper Concentration ◽  
Copper Ions ◽  
Copper Ion ◽  
Order Rate Constant ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order ◽  
Rate Limiting ◽  
Kinetics Of

The kinetics of the reconstitution reaction of apotyrosinase with copper (II) ions are reported. The reaction is pseudo first order with respect to apoenzyme and the values of these pseudo first order rate constants are reported as a function of copper (II) concentration. Two copper ions bind to apoenzyme, and if the second one is rate limiting, the kinetically relevant copper concentration is the copper originally added minus the amount used in binding the first copper ion to enzyme. This modified copper concentration is linearly related to the magnitude of the pseudo first order rate constant, up to a copper concentration of 1.25 × 10−4 M (10-fold excess), giving a second order rate constant of 7.67 × 102 ± 0.93 × 102 M−1∙s−1.Key words: apotyrosinase, copper, tyrosinase.

Open-chain nitrogen compounds. Part XV. A kinetic study of the hydrolysis of 1-aryl-3-aryloxymethyl-3-methyltriazenes and related triazenes

1992 ◽  
Vol 70 (8) ◽  
pp. 2224-2233 ◽  
Author(s):  
Keith Vaughan ◽  
Donald L. Hooper ◽  
Marcus P. Merrin
Keyword(s):  
Rate Constant ◽  
Order Rate Constant ◽  
Buffer System ◽  
Open Chain ◽  
Nucleophilic Displacement ◽  
Ether Oxygen ◽  
Rate Of Hydrolysis ◽  
Electron Withdrawing Group ◽  
Ph Range ◽  
Kinetics Of

The kinetics of hydyrolysis of a series of 1-aryl-3-aryloxymethyl-3-methyltriazenes, Ar-N=N-NMe-CH2OAr′, was studied over the pH range 2–7.5. Reactions were followed by the change in UV absorbance spectra of the triazenes. The aryloxymethyltriazenes decompose more slowly at pH 7.5 than the hydroxymethyltriazenes, Ar-N=NMe-CH2OH; the hydrolysis is favoured by the presence of an electron-withdrawing group in Ar′. A mixed isopropanol/buffer system was developed in order to improve solubility of the aryloxymethyl triazenes. Lowering the pH caused an increase in the rate of hydrolysis and under strongly acidic conditions an electron-withdrawing group in Ar′ actually slows down the reaction. A Hammett plot of the pseudo-first-order rate constant, kobs, is curved, indicating that two or more mechanisms operate simultaneously and that the contribution of each mechanism is substituent-dependent. A plot of kobs vs. [buffer] is linear; the slope of the plot affords the rate constant, kb for the buffer-catalyzed reaction for each substituent. A Hammett plot of kb vs. σ is linear with ρ = +0.55, suggesting that the buffer-catalyzed reaction involves nucleophilic displacement of the phenoxy group by the buffer anion. Further analysis afforded the specific acid-catalyzed rate constants, [Formula: see text], for each substituent; this component of the reaction has a negative ρ, consistent with a mechanism involving protonation at the ether oxygen. The postulation that specific acid catalysis is a component of the reaction mechanism was confirmed by the observation of a solvent deuterium isotope effect, 2.28 > kH/kD > 1.60. Only the p-NO2 and p-CN phenyloxymethyltriazenes showed any spontaneous decomposition.

The mechanisms of hydrolysis of alkyl N-alkylthioncarbamate esters at 100 °C

2005 ◽  
Vol 83 (9) ◽  
pp. 1483-1491 ◽  
Author(s):  
Eduardo Humeres ◽  
Maria de Nazaré M. Sanchez ◽  
Conceição ML Lobato ◽  
Nito A Debacher ◽  
Eduardo P. de Souza
Keyword(s):  
Rate Constant ◽  
Order Rate Constant ◽  
Base Catalysis ◽  
Hydrolysis Rate ◽  
Negative Slope ◽  
General Base ◽  
Order Rate ◽  
Basic Hydrolysis ◽  
Rate Profile ◽  
Hydrolysis Of

The hydrolysis of ethyl N-ethylthioncarbamate (ETE) at 100 °C was studied in the range of 7 mol/L HCl to 4 mol/L NaOH. The pH–rate profile showed that the hydrolysis occurred through specific acid catalysis at pH < 2, spontaneous hydrolysis at pH 2–6.5, and specific basic catalysis at pH > 6.5. The Hammett acidity plot and the excess acidity plot against X were linear. The Bunnett–Olsen plot gave a negative slope indicating that the conjugate acid was less hydrated than the neutral substrate. It was concluded that the acid hydrolysis occurred by an A1 mechanism. The neutral species hydrolyzed with general base catalysis shown by the Brønsted plot with β = 0.48 ± 0.04. Water acted as a general base catalyst with (pseudo-)first-order rate constant, kN = 3.06 × 10–7 s–1. At pH > 6.5 the rate constants increased, reaching a plateau at high basicity. The basic hydrolysis rate constant of ethyl N,N-diethylthioncarbamate, which must react by a BAc2 mechanism, increased linearly at 1–3 mol/L NaOH with a second-order rate constant, k2 = 2.3 × 10–4 (mol/L)–1 s–1, which was 10 times slower than that expected for ETE. Experiments of ETE in 0.6 mol/L NaOH with an excess of ethylamine led to the formation of diethyl thiourea, presenting strong evidence that the basic hydrolysis occurred by the E1cb mechanism. In the rate-determining step, the E1cb mechanism involved the elimination of ethoxide ion from the thioncarbamate anion, producing an isothiocyanate intermediate that decomposed rapidly to form ethylamine, ethanol, and COS.Key words: alkylthioncarbamate esters, ethyl N-ethylthioncarbamate, ethyl N,N-diethylthioncarbamate, hydrolysis, mechanism.

Studies on Horseradish Peroxidase. VII. A Kinetic Study of the Oxidation of Iodide by Horseradish Peroxidase Compound II

1971 ◽  
Vol 49 (18) ◽  
pp. 3059-3063 ◽  
Author(s):  
R. Roman ◽  
H. B. Dunford ◽  
M. Evett
Keyword(s):  
Ionic Strength ◽  
Horseradish Peroxidase ◽  
Kinetic Study ◽  
Rate Constant ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
Acid Dissociation ◽  
Ph Range ◽  
Compound Ii ◽  
Kinetics Of

The kinetics of the oxidation of iodide ion by horseradish peroxidase compound II have been studied as a function of pH at 25° and ionic strength of 0.11. The logarithm of the second-order rate constant decreases linearly from 2.3 × 105 to 0.1 M−1 s−1 with increasing pH over the pH range 2.7 to 9.0. The pH dependence of the reaction is explained in terms of an acid dissociation outside the pH range of the study.

Studies on Sulphamic Acid and Related Compounds. II. Kinetics and Mechanism of Hydrolysis of Trimethylamine- and of Triethylamine Sulphur Trioxide Addition Compounds

1962 ◽  
Vol 15 (2) ◽  
pp. 251 ◽  
Author(s):  
BE Fleischfresser ◽  
I Lauder
Keyword(s):  
Rate Constant ◽  
Order Rate Constant ◽  
Aqueous Acetone ◽  
Second Order ◽  
Fluoride Ions ◽  
Order Rate ◽  
Mechanism Of Hydrolysis ◽  
Reaction With Water ◽  
Sulphamic Acid ◽  
Hydrolysis Of

The kinetics of hydrolysis of trimethylamine- and of triethylaminesulphur trioxide addition compounds have been studied in water and in aqueous acetone. Reaction occurs according to the equation,������������� f - + R,N.SO,+H,O-tR,XH+HSO~.The solvolysis reactions are first-order and are not catalyzed by acids. The halide ions, Cl', Br', and 1', show only a normal salt effect on the rate of hydrolysis of + - (CH,),N.SO, but in the presence of fluoride ions, the rate constant for the production + - of acid from (C,H,),N.SO, in water at 95 OC is about one-seventh of that in the absence of fluoride under the same conditions. It is suggested that the fluorosulphonate ion is formed rapidly, and that this ion then undergoes slow hydrolysis :�In the presence of alkali, using water as the solvent, second-order kinetics are observed, the equation for the reaction being,�������������� + - R,N.SO,+~OH-+R,X+SO~= +H,O. Assuming the reaction with water is bimolecular, the ratio of the (bimolecular) rate constants at 35 OC, ko~-/k~,o is approximately lo8 for each complex. In aqueous acetone, at low water concentrations, the hydrolysis reactions of the trialkylaminesulphur trioxide complexes show second-order kinetics. At 35 OC for the hydrolysis of + - (CH,),N.SO, the ratio of the second-order rate constant in aqueous acetone to the + - (calculated) second-order rate constant in water is approximately 550 ; for (C,H,),N.SO, the same ratio is 6900. It is considered that hydrolysis occurs in water and in aqueous acetone via a bi- molecular attack at sulphur.

Kinetics and mechanism of the reaction of dimethyl acetylphosphonate with water. Expulsion of a phosphonate ester from a carbonyl hydrate

1978 ◽  
Vol 56 (13) ◽  
pp. 1792-1795 ◽  
Author(s):  
Ronald Kluger ◽  
David C. Pire ◽  
Jik Chin
Keyword(s):  
Rate Constant ◽  
Electronic Effect ◽  
Order Rate Constant ◽  
Ion Concentration ◽  
First Order ◽  
Cleavage Reactions ◽  
Ph Range ◽  
Rapid Hydrolysis ◽  
Hydrolysis Of ◽  
Mechanism Of The Reaction

Dimethyl acetylphosphonate (DAP) is rapidly cleaved in water to acetate and dimethylphosphonic acid. The half time for reaction at pH 7, 25 °C is estimated to be 3 s. The reaction is first order in hydroxide ion concentration and first order in DAP concentration. Rates of reaction were measured over the pH range 3.8 to 6.5 at 25 °C, 6.5 and 7.0 at 5 °C, 4.5 to 6.5 at 35 °C, and 4.5 to 6.0 at 45 °C. The average observed second-order rate constant at 25 °C is 2.4 × 106M−1 s−1. DAP is converted rapidly to a hydrated carbonyl adduct. The mechanism for the formation of the observed products is proposed to be analogous to cleavage reactions of other carbonyl hydrates, proceeding from a monoanion conjugate in this case. The estimated rate constant for the unimolecular cleavage of the carbonyl hydrate anion is 2 × 103 s−1. The rapid hydrolysis of DAP results from energetically favourable formation of a hydrate due to the electronic effect of the phosphonate diester. This effect also promoles ionization of the hydrate. The ionized hydrate readily expels the phosphonate diester to achieve the overall rapid hydrolysis.

Kinetics of Reactions of 8-Quinolinol and Acetate with Hydroxyaluminum Species in Aqueous Solutions. 1. Polynuclear Hydroxyaluminum Cations

1971 ◽  
Vol 49 (10) ◽  
pp. 1683-1687 ◽  
Author(s):  
R. C. Turner ◽  
Wan Sulaiman
Keyword(s):  
Acetic Acid ◽  
Rate Constant ◽  
Empirical Equation ◽  
Decomposition Reaction ◽  
Order Rate Constant ◽  
Acetate Concentration ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order ◽  
Kinetics Of

The effect of varying 8-quinolinol and acetate concentration on the rate of decomposition of poly-nuclear hydroxyaluminum cations was studied. It was found that the concentration of the undissociated 8-quinolinol and acetic acid molecules determined the magnitude of the first order rate constant for the decomposition of the polynuclear hydroxyaluminum cations, except when the acetate concentrations were relatively high. With high acetate concentrations, it appeared that polynuclear acetate species were involved in the reactions. An empirical equation was developed showing the effect of 8-quinolinol and acetic acid molecule concentrations on the pseudo first order rate constant for the decomposition reaction.

Studies on Horseradish Peroxidase. XI. On the Nature of Compounds I and II as Determined from the Kinetics of the Oxidation of Ferrocyanide

1973 ◽  
Vol 51 (4) ◽  
pp. 582-587 ◽  
Author(s):  
M. L. Cotton ◽  
H. B. Dunford
Keyword(s):  
Horseradish Peroxidase ◽  
Rate Constant ◽  
Active Sites ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
Second Order ◽  
Compound I ◽  
Order Rate ◽  
Compound Ii ◽  
Kinetics Of

In order to investigate the nature of compounds I and II of horseradish peroxidase, the kinetics were studied of ferrocyanide oxidation catalyzed by these compounds which were prepared from three different oxidizing agents. The pH dependence of the apparent second-order rate constant for ferrocyanide oxidation by compound I, prepared from ethyl hydroperoxide and m-chloroperbenzoic acid, was interpreted in terms of an ionization on the enzyme with a pKa = 5.3, identical to that reported previously for hydrogen peroxide. The second-order rate constant for the compound II-ferrocyanide reaction also showed the same pH dependence for the three oxidizing substrates. However, with more accurate results, the compound II-ferrocyanide reaction was reinterpreted in terms of a single ionization with pKa = 8.5. The same dependence of ferrocyanide oxidation on pH suggests structurally identical active sites for compounds I and II prepared from the three different oxidizing substrates.

Reactivity of Silicates 1. Kinetic Studies of the Hydrolysis of Linear and Cyclic Siloxanes as Models for Defect Structure in Silicates

1986 ◽  
Vol 73 ◽  
Author(s):  
Carol A. Balfe ◽  
Kenneth J. Ward ◽  
David R. Tallant ◽  
Sheryl L. Martinez
Keyword(s):  
Rate Constant ◽  
Kinetic Studies ◽  
Order Rate Constant ◽  
Hydrolysis Rate ◽  
Rate Data ◽  
Cyclic Siloxanes ◽  
Highly Strained ◽  
Kinetics Of ◽  
Hydrolysis Of ◽  
Tetrahydrofuran Solution

ABSTRACTThe kinetics of hydrolysis of hexamethylcyclotrisiloxane and di-t-butyldimesitylcyclodisiloxane in tetrahydrofuran solution have been determined and compared to hydrolysis rates of silica defects. In the presence of sufficient excess witer, the first-order rate constant of the cyclotrisiloxine, k= 3.8 × 10−3 min is similar to the rate constant, k = 5.2 × 10−1 min, of the disappearance of the D2 Raman silica defect band it has been proposed to model. Limited hydrolysis rate data for the cyclodisiloxane suggests that it hydrolyzes at least four times faster than does the cyclotrisiloxane. These data are consistent with rate data available for silica crack growth and support the assignment of highly strained siloxane bonds at the crack tip to cyclodisiloxanes. Infrared spectra determined for the cyclodisiloxanes lend further support to this model.

Sign in / Sign up

Export Citation Format

Share Document