The shear strength of unsaturated soils

1978 ◽  
Vol 15 (3) ◽  
pp. 313-321 ◽  
Author(s):  
D. G. Fredlund ◽  
N. R. Morgenstern ◽  
R. A. Widger
Keyword(s):  
Shear Strength ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Research Literature ◽  
Test Results ◽  
State Variables ◽  
Limited Data ◽  
Laboratory Test Results

The shear strength of an unsaturated soil is written in terms of two independent stress state variables. One form of the shear strength equation is[Formula: see text]The transition from a saturated soil to an unsaturated soil is readily visible. A second form of the shear strength equation is[Formula: see text]Here the independent roles of changes in total stress σ and changes in pore-water pressure uw are easily visualized.Published research literature provides limited data. However, the data substantiate that the shear strength can be described by a planar surface of the forms proposed. A procedure is also outlined to evaluate the pertinent shear strength parameters from laboratory test results.

scholarly journals Influence of Matric Suction on the Shear Strength Behaviour of Unsaturated Sand

10.14311/590 ◽  
2004 ◽  
Vol 44 (4) ◽  
Author(s):  
A. Farouk ◽  
L. Lamboj ◽  
J. Kos
Keyword(s):  
Shear Strength ◽  
Stress State ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Matric Suction ◽  
Test Method ◽  
State Variables ◽  
Unsaturated Sand

As a part of the effort made to understand the behaviour of unsaturated soils, this work studies the shear strength characteristics of a cohesionless unsaturated soil. Generally, the determination of the shear strength of unsaturated soils is a great challenge to geotechnical engineers, both in terms of understanding it and the effort necessary to determine it. Matric suction is one of the stress state variables that control the shear strength of unsaturated soils. Therefore, the main aim of this study is to investigate the effect of matric suction on the shear strength characteristic of sand known commercially as Sand PR33. The shear strength behaviour of unsaturated sand is studied in this work using the constant water content triaxial test method with measurements of matric suction during the shearing stage. The tests were performed using the axis translation technique in such a way that the pore-air pressure was controlled while the pore-water pressure was measured during all tests.

scholarly journals Impact of the moisture content in medium sands on CPTU test results

2016 ◽  
Vol 48 (3) ◽  
pp. 221-231 ◽  
Author(s):  
Łukasz Zawadzki ◽  
Marek Bajda
Keyword(s):  
Moisture Content ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Degree Of Saturation ◽  
Test Results ◽  
Time Dynamic ◽  
Tip Resistance ◽  
The Impact ◽  
Resistance Value

Abstract Soils occurring in the soil “active zone” are in contact with the surface and are directly influenced by external factors (mainly climatic changes) that cause variation in their parameters over time. Dynamic and uncontrolled changes of soil properties e.g. due to rainfall and evapotranspiration processes may affect field test results leading to the misinterpretation of the obtained data. This paper presents investigations on the influence of moisture content changes in sandy soils on CPTU results. For this purpose, a field ground model has been constructed and five CPTU tests with a different moisture content of soil were carried out. During the investigations, the tip resistance (qc), friction on sleeve (fs), and pore water pressure (u2) were measured. Moreover, a TDR probe was applied to determine the distribution of the moisture content in the studied soil columns. Differences between CPT results obtained in saturated and unsaturated soils have been shown. Furthermore, a simple equation to correct the tip resistance value due to the impact of the degree of saturation has been proposed.

Second Canadian Geotechnical Colloquium: Appropriate concepts and technology for unsaturated soils

1979 ◽  
Vol 16 (1) ◽  
pp. 121-139 ◽  
Author(s):  
D. G. Fredlund
Keyword(s):  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Three Dimensional ◽  
Earth Pressure ◽  
Saturated Soil ◽  
Engineering Practice ◽  
The Matrix ◽  
Matrix Suction

A practical science has not been fully developed for unsaturated soils for two main reasons. First, there has been the lack of an appropriate science with a theoretical base. Second, there has been the lack of an appropriate technology to render engineering practice financially viable.This paper presents concepts that can be used to develop an appropriate engineering practice for unsaturated soils. The nature of an unsaturated soil is first described along with the accompanying stress conditions. The basic equations related to mechanical properties are then proposed. These are applied to practical problems such as earth pressure, limiting equilibrium, and volume change.An attempt is made to demonstrate the manner in which saturated soil mechanics must be extended when a soil is unsaturated. Two variables are required to describe the stress state of an unsaturated soil (e.g., (σ – ua) and (ua – uW). There is a smooth transition from the unsaturated case to the saturated case since the pore-air pressure becomes equal to the pore-water pressure as the degree of saturation approaches 100%. Therefore, the matrix suction (i.e., (ua – uW) goes to 0 and the pore-water pressure can be substituted for the pore-air pressure (i.e., (σ – uW)).The complete volumetric deformation of an unsaturated soil requires two three-dimensional constitutive surfaces. These converge to one two-dimensional relationship for a saturated soil. The shear strength for an unsaturated soil is a three-dimensional surface that reduces to the conventional Mohr–Coulomb envelope for a saturated soil.The manner of applying the volumetric deformation equations and the shear strength equation to practical problems is demonstrated. For earth pressure and limiting equilibrium problems, the unsaturated soil can be viewed as a saturated soil with an increased cohesion. The increase in cohesion is proportional to the matrix suction of the soil. For volume change problems it is necessary to have an indication of the relationship between the various soil moduli.There is a need for further experimental studies and case histories to substantiate the proposed concepts and theories.

scholarly journals Verification of the Fredlund (2019) Unsaturated Shear Strength Function

Geosciences ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 151
Author(s):  
Thi Phuong An Tran ◽  
Delwyn G. Fredlund
Keyword(s):  
Shear Strength ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Characteristic Curve ◽  
Strength Function ◽  
Past Research ◽  
Research Literature ◽  
Reference Points ◽  
Degree Of Saturation ◽  
Anchor Points

There has been a proliferation of equations proposed to describe the unsaturated shear strength envelope going back to the 1970s. However, there have been limited studies to verify the suitability of one unsaturated shear strength equation over another. Most proposed shear strength equations have attempted to relate the shear strength of an unsaturated soil to some aspect(s) of the soil–water characteristic curve (SWCC). Estimation procedures have generally focused on using that of air-entry value (AEV) as defined by the drying (or desorption) branch of the degree of saturation SWCC (S-SWCC). This paper studies the suitability of using two “anchor points” (or reference points) along the drying S-SWCC to estimate the unsaturated soil shear strength function. The anchor points referred to are the air-entry value (AEV) of the soil and the “residual suction point” of the soil defined in terms of the S-SWCC. Shear strength conditions associated with both so-called anchor points are used as “boundary conditions” that should be satisfied when estimating the shear strength function for unsaturated soils. Past research laboratory measurements published in the research literature are used as part of the verification process for this study.

Shear-strength characteristics of a residual soil

1995 ◽  
Vol 32 (1) ◽  
pp. 60-77 ◽  
Author(s):  
H. Rahardjo ◽  
T.T. Lim ◽  
M.F. Chang ◽  
D.G. Fredlund
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Matric Suction ◽  
Residual Soil ◽  
Test Results ◽  
Angle Of Internal Friction ◽  
Slip Surfaces

Shallow landslides in natural residual soils slopes are common all over the world. The slip surfaces associated with these landslides are often situated above the groundwater table. Therefore, it is important to quantify the contribution of negative pore-water pressure to the shear strength of soil. The shear-strength characteristics of residual soil from the Jurong Formation in Singapore were assessed using multistage, consolidated drained triaxial tests. These tests involved shearing under either a constant net confining pressure and varying matric suctions or under a constant matric suction and varying net confining pressures. An extended form of the Mohr–Coulomb equation was used to interpret the test results. The test results show that for matric suctions up to 400 kPa, the angle of internal friction associated with the matric suction, [Formula: see text], is similar to the effective angle of internal friction, [Formula: see text], which averages 26° for the residual soil of the Jurong Formation. The residual soil can maintain a high degree of saturation for matric suctions as high as 400 kPa. Examples involving stability analyses of a residual soil slope with varying pore-water pressure profiles indicate that soil suction contributes significantly to the factor of safety, particularly for shallow slip surfaces. Key words : residual soil, unsaturated soil, matric suction, shear strength, multistage triaxial test, slope stability.

scholarly journals ANALYSIS OF UNSATURATED SOIL PARAMETERS AS SLOPE STABILITY MITIGATION

2017 ◽  
Vol 79 (7-2) ◽  
Author(s):  
Heriansyah Putra ◽  
Ahmad Rifa`i ◽  
Joko Sujono ◽  
Alfira Silarukmi
Keyword(s):  
Shear Strength ◽  
Pore Water ◽  
Safety Factor ◽  
Unsaturated Soil ◽  
Critical Condition ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Soil Parameters ◽  
Shear Strength Parameters ◽  
Strength Parameters

The pore water pressure is the essential factor and plays a key role in the unsaturated soil parameters. Experimental works and numerical analysis were conducted to determine the critical condition of the slope stability due to the evolution of shear strength parameters. The effect of infiltration on the pore water pressure was evaluated. The filter paper method was conducted to obtain the matric suction in various degrees of saturation. The mechanical properties of the undisturbed samples were examined through triaxial and permeability test, respectively. WRPLOT ViewTM was adopted to assess the intensity and duration of the actual rainfall. The applicability of the psycho-empirical method in SOILVISION Database to fit Soil Water Characteristic Curve (SWCC) was studied. GEO-SLOPE was used to assess the evolution of the pore water pressure and its effect on the safety factor of the slope. The evolution of pore water pressure induced the infiltration influenced the shear strength parameters and reduced the safety factor. The reduction 20% of cohesion was obtained and hence, the safety factor decrease to 1.0. The infiltration at the beginning of the wet season is the most critical condition that increases the soil moisture significantly.

scholarly journals Effect of water infiltration on the mechanical behaviour of unsaturated soil

2019 ◽  
Vol 92 ◽  
pp. 07002
Author(s):  
Ali Murtaza Rasool ◽  
Jiro Kuwano
Keyword(s):  
Shear Strength ◽  
Pore Water ◽  
Unsaturated Soil ◽  
Mechanical Behaviour ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Water Infiltration ◽  
Confining Stress ◽  
Effect Of Water ◽  
The Stability

Natural slopes and embankments are generally unsaturated in nature with negative pore water pressure adding to the shear strength and hence the stability of the slopes. During the event of rainfall, pore water pressure becomes less negative or even positive as a result the shear strength of soil decreases and failure occur. Therefore, the strength and deformation characteristics for unsaturated soil become important when analysing the stability of these types of slopes. In this study, a triaxial test apparatus was used to study the effect of water infiltration on the mechanical behaviour of unsaturated soil. The test results show that water infiltration decreased with increase in net confining stress and the stress paths were independent of the matric suction, the net confining stress and the shearing conditions for the present experimental study.

scholarly journals Evaluation on slope stability of unsaturated soils

2000 ◽  
Vol 22 ◽  
Author(s):  
L. J. Wang ◽  
M. Zhang
Keyword(s):  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Matric Suction ◽  
Groundwater Table ◽  
Degree Of Saturation ◽  
Engineering Properties ◽  
Soil Slopes

In drought-prone and semiarid areas, the groundwater table is deep and the soils are at an unsaturated state because of evaporation or transpiration. The negative pore water pressure or matric suction (ua-uw) is an important property of unsaturated soils that are situated above the groundwater table. In the conditions of rainfall, ground seepage, or drainpipe leakage, the matric suction will decrease with the increase of the degree of saturation, and the soils will lose their part of shear strength, which is the main reason why many unsaturated soil slopes become unstable. This paper discusses the engineering properties of unsaturated soils. Following the limit equilibrium principle, the unsaturated soil slopes are evaluated by applying the slice method.

scholarly journals Thirty-Ninth Canadian Geotechnical Colloquium: Unsaturated soil mechanics — bridging the gap between research and practice

2018 ◽  
Vol 55 (7) ◽  
pp. 909-927 ◽  
Author(s):  
Greg A. Siemens
Keyword(s):  
Vadose Zone ◽  
Unsaturated Soil ◽  
Unsaturated Zone ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Soil Mechanics ◽  
Water Pressure ◽  
Coupled Processes ◽  
Near Surface ◽  
Unsaturated Soil Mechanics

The majority of geoengineering applications occur in the unsaturated (vadose) zone, which is the near-surface region forming the connection between meteorological phenomena above and saturated ground below. The key characteristic of the unsaturated zone is that water is in tension or, put another way, pore-water pressure is negative. Moisture content, as well as most material properties, vary spatially and temporally in the unsaturated zone and coupled processes are common. In geoengineering applications in the vadose zone, unsaturated soils may be present during part or all of their design lives. The question is how or when to consider the unsaturated soils’ principles in an analysis or design. Although most geoengineering applications have an unsaturated component, use of unsaturated soil mechanics in practice lingers behind the prolific number of publications due the uncertain benefit of accounting for unsaturated effects, complexity, and conservativeness among other reasons. The focus of this colloquium is to continue bridging the gap by illustrating unsaturated soils’ principles using application-driven examples in the areas of capillarity as well as flow, strength, and deformation phenomena. As principles of unsaturated soils become more understood and demand increases for incorporating climate change effects in design, use of unsaturated soils’ principles in practice will continue to increase.

Conjectures, Hypotheses, and Theories of Drumlin Formation (In memory of Stanislaw Baranowski)

1981 ◽  
Vol 27 (97) ◽  
pp. 503-505 ◽  
Author(s):  
Ian J. Smalley
Keyword(s):  
Shear Strength ◽  
Pore Water ◽  
Stress Level ◽  
Critical Stress ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Glacial Till ◽  
Forming Process ◽  
Stress Levels

AbstractRecent investigations have shown that various factors may affect the shear strength of glacial till and that these factors may be involved in the drumlin-forming process. The presence of frozen till in the deforming zone, variation in pore-water pressure in the till, and the occurrence of random patches of dense stony-till texture have been considered. The occurrence of dense stony till may relate to the dilatancy hypothesis and can be considered a likely drumlin-forming factor within the region of critical stress levels. The up-glacier stress level now appears to be the more important, and to provide a sharper division between drumlin-forming and non-drumlin-forming conditions.

Sign in / Sign up

Export Citation Format

Share Document