SILICON CARBIDE MICROSTRIP DETECTORS FOR HIGH RESOLUTION X-RAY SPECTROSCOPY

2012 ◽  
pp. 653-657
Author(s):  
GIUSEPPE BERTUCCIO ◽  
DONATELLA PUGLISI ◽  
CLAUDIO LANZIERI
Keyword(s):  
Silicon Carbide ◽  
High Resolution ◽  
X Ray ◽  
Microstrip Detectors

scholarly journals Structural characterization of liquid phase sintered silicon carbide by high-resolution X-ray diffractometry

Cerâmica ◽  
2005 ◽  
Vol 51 (318) ◽  
pp. 168-172 ◽  
Author(s):  
C. A. Kelly ◽  
P. A. Suzuki ◽  
S. Ribeiro ◽  
S. Kycia
Keyword(s):  
Silicon Carbide ◽  
High Resolution ◽  
Mixed Oxide ◽  
Beta Phase ◽  
Alpha Phase ◽  
X Ray Diffraction ◽  
Solid Solution Formation ◽  
X Ray ◽  
Synchrotron Light

Silicon carbide (SiC) was sintered using two different additives: AlN-Y2O3 or AlN-CRE2O3. CRE2O3 is a mixed oxide formed by Y2O3 and rare-earth oxides. The crystalline structures of the phases were analyzed by high-resolution X-ray diffraction using synchrotron light source. The results of the Rietveld refinement of the mixed oxide show a solid solution formation. In both silicon carbide samples prepared using AlN-Y2O3 or AlN-CRE2O3 3C (beta-phase) and 6H (alpha-phase) polytypes were found. The structural and microstructural results for both samples were similar. This is an indication of the viability of the use of CRE2O3 in substitution for Y2O3 as additive to obtain dense materials.

Silicon carbide for high resolution X-ray detectors operating up to 100°C

2004 ◽  
Vol 522 (3) ◽  
pp. 413-419 ◽  
Author(s):  
Giuseppe Bertuccio ◽  
Roberto Casiraghi ◽  
Antonio Cetronio ◽  
Claudio Lanzieri ◽  
Filippo Nava
Keyword(s):  
Silicon Carbide ◽  
High Resolution ◽  
X Ray

Electron microscopy of rabbit FC crystals

1983 ◽  
Vol 41 ◽  
pp. 730-731
Author(s):  
Robert A. Grant ◽  
Laura L. Degn ◽  
Wah Chiu ◽  
John Robinson
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Molecular Replacement ◽  
X Ray ◽  
X Ray Crystallography ◽  
Resolution Electron ◽  
Replacement Technique ◽  
Hydrated Crystal ◽  
Molecular Structure Analysis

Proteolytic digestion of the immunoglobulin IgG with papain cleaves the molecule into an antigen binding fragment, Fab, and a compliment binding fragment, Fc. Structures of intact immunoglobulin, Fab and Fc from various sources have been solved by X-ray crystallography. Rabbit Fc can be crystallized as thin platelets suitable for high resolution electron microscopy. The structure of rabbit Fc can be expected to be similar to the known structure of human Fc, making it an ideal specimen for comparing the X-ray and electron crystallographic techniques and for the application of the molecular replacement technique to electron crystallography. Thin protein crystals embedded in ice diffract to high resolution. A low resolution image of a frozen, hydrated crystal can be expected to have a better contrast than a glucose embedded crystal due to the larger density difference between protein and ice compared to protein and glucose. For these reasons we are using an ice embedding technique to prepare the rabbit Fc crystals for molecular structure analysis by electron microscopy.

High Resolution Study of Polytypism: Application to SiC and Au3 Mn

1982 ◽  
Vol 40 ◽  
pp. 540-541
Author(s):  
G. Van Tendeloo ◽  
J. Van Landuyt ◽  
S. Amelinckx
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Stacking Sequence ◽  
X Ray ◽  
Powerful Technique ◽  
Resolution Study ◽  
The Ideal

Polytypism has been studied for a number of years and a wide variety of stacking sequences has been detected and analysed. SiC is the prototype material in this respect; see e.g. Electron microscopy under high resolution conditions when combined with x-ray measurements is a very powerful technique to elucidate the correct stacking sequence or to study polytype transformations and deviations from the ideal stacking sequence.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

Scanning Electron Microscopy and x-ray analysis of microparticles and early hydration effects

1995 ◽  
Vol 53 ◽  
pp. 692-693
Author(s):  
Yun Lu ◽  
David C. Joy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Morphological Development ◽  
Early Hydration ◽  
X Ray ◽  
Blended Cements ◽  
Powder Particles ◽  
Chemical Wastes ◽  
Scanning Electron

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.

Tubulin structure at intermediate resolution

1995 ◽  
Vol 53 ◽  
pp. 852-853
Author(s):  
K. H. Downing ◽  
S. G. Wolf ◽  
E. Nogales
Keyword(s):  
High Resolution ◽  
Structural Data ◽  
Therapeutic Drug ◽  
Zinc Ions ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Negative Stain ◽  
Functional Mechanisms ◽  
Tubulin Structure

Microtubules are involved in a host of critical cell activities, many of which involve transport of organelles through the cell. Different sets of microtubules appear to form during the cell cycle for different functions. Knowledge of the structure of tubulin will be necessary in order to understand the various functional mechanisms of microtubule assemble, disassembly, and interaction with other molecules, but tubulin has so far resisted crystallization for x-ray diffraction studies. Fortuitously, in the presence of zinc ions, tubulin also forms two-dimensional, crystalline sheets that are ideally suited for study by electron microscopy. We have refined procedures for forming the sheets and preparing them for EM, and have been able to obtain high-resolution structural data that sheds light on the formation and stabilization of microtubules, and even the interaction with a therapeutic drug.Tubulin sheets had been extensively studied in negative stain, demonstrating that the same protofilament structure was formed in the sheets and microtubules. For high resolution studies, we have found that the sheets embedded in either glucose or tannin diffract to around 3 Å.

Nano-probe x-ray analysis and high-resolution imaging on planar defects in high-pressure synthesized infinite-layer superconductor

1994 ◽  
Vol 52 ◽  
pp. 728-729
Author(s):  
Y. Y. Wang ◽  
H. Zhang ◽  
V. P. Dravid ◽  
H. Zhang ◽  
L. D. Marks ◽  
...  
Keyword(s):  
High Pressure ◽  
High Resolution ◽  
Atomic Structure ◽  
Emission Spectra ◽  
High Resolution Electron Microscopy ◽  
Planar Defects ◽  
X Ray ◽  
Infinite Layer ◽  
Resolution Electron ◽  
Resolution Imaging

Azuma et al. observed planar defects in a high pressure synthesized infinitelayer compound (i.e. ACuO2 (A=cation)), which exhibits superconductivity at ~110 K. It was proposed that the defects are cation deficient and that the superconductivity in this material is related to the planar defects. In this report, we present quantitative analysis of the planar defects utilizing nanometer probe xray microanalysis, high resolution electron microscopy, and image simulation to determine the chemical composition and atomic structure of the planar defects. We propose an atomic structure model for the planar defects.Infinite-layer samples with the nominal chemical formula, (Sr1-xCax)yCuO2 (x=0.3; y=0.9,1.0,1.1), were prepared using solid state synthesized low pressure forms of (Sr1-xCax)CuO2 with additions of CuO or (Sr1-xCax)2CuO3, followed by a high pressure treatment.Quantitative x-ray microanalysis, with a 1 nm probe, was performed using a cold field emission gun TEM (Hitachi HF-2000) equipped with an Oxford Pentafet thin-window x-ray detector. The probe was positioned on the planar defects, which has a 0.74 nm width, and x-ray emission spectra from the defects were compared with those obtained from vicinity regions.

Characterisation of planar crystal defects in Y2Fe17Cx (0.6 ≤ x ≤ 1.6) magnetic material by High Resolution Electron Microscopy

1990 ◽  
Vol 48 (4) ◽  
pp. 774-775
Author(s):  
W. Coene ◽  
F. Hakkens ◽  
T.H. Jacobs ◽  
K.H.J. Buschow
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Permanent Magnets ◽  
Annealing Treatment ◽  
High Resolution Electron Microscopy ◽  
Crystal Defects ◽  
Ordered Structure ◽  
X Ray ◽  
Planar Crystal ◽  
Resolution Electron

Intermetallic compounds of the type RE2Fe17Cx (RE= rare earth element) are promising candidates for permanent magnets. In case of Y2Fe17Cx, the Curie temperature increases from 325 K for x =0 to 550 K for x = 1.6 . X ray and electron diffraction reveal a carbon - induced structural transformation in Y2Fe17Cx from the hexagonal Th2Ni17 - type (x < 0.6 ) to the rhombohedral Th2Zn17 - type ( x ≥ 0.6). Planar crystal defects introduce local sheets of different magnetic anisotropy as compared with the ordered structure, and therefore may have an important impact on the coercivivity mechanism .High resolution electron microscopy ( HREM ) on a Philips CM30 / Super Twin has been used to characterize planar crystal defects in rhombohedral Y2Fe17Cx ( x ≥ 0.6 ). The basal plane stacking sequences are imaged in the [100] - orientation, showing an ABC or ACB sequence of Y - atoms and Fe2 - dumbbells, for both coaxial twin variants, respectively . Compounds resulting from a 3 - week annealing treatment at high temperature ( Ta = 1000 - 1100°C ) contain a high density of planar defects.

High resolution X-ray studies of the smectic A-nematic transition

1978 ◽  
Vol 3 ◽  
pp. 357-357
Author(s):  
J. Als-Nielsen ◽  
R. J. Birgeneau ◽  
M. Kaplan ◽  
J. D. Litster ◽  
C. R. Safinya
Keyword(s):  
High Resolution ◽  
X Ray ◽  
Smectic A
Sign in / Sign up

Export Citation Format

Share Document