LOCAL AND INTERACTIVE POST-BUCKLING OF RHS THIN-WALLED MEMBERS — COMPARING A NEW SPECIAL BEAM FINITE ELEMENT WITH SHELL FE MODELS

2007 ◽  
Vol 07 (02) ◽  
pp. 213-241 ◽  
Author(s):  
HERVE DEGEE ◽  
NICOLAS BOISSONNADE ◽  
BARBARA ROSSI
Keyword(s):  
Finite Element ◽  
Local Buckling ◽  
Linear Analysis ◽  
Local Deformation ◽  
Theoretical Formulation ◽  
Non Linear ◽  
Beam Displacement ◽  
Post Buckling ◽  
Thin Walled ◽  
Global And Local

This paper presents a special thin-walled plane beam finite element that accounts for the in-plane cross-section local deformation. The element is based on the superposition of a classical beam displacement field and of an additional field describing local effects, with an approximation on the local second-order membrane stress field. The theoretical formulation is summarized and an application of the resulting numerical tool to the post-buckling analysis of RHS thin-walled members with moderate local and global slenderness susceptible to both global and local buckling is then performed. Different types of analyses are presented (computation of critical bifurcation loads, geometrically non-linear analysis, geometrically and materially non-linear analysis). The results obtained with the proposed beam finite element are compared to values provided by shell FE models.

Failure Mechanics of Uniformly Compressed Thin-Walled Box-Section Struts

2012 ◽  
Vol 225 ◽  
pp. 172-177 ◽  
Author(s):  
Noorfaizal Yidris ◽  
J. Loughlan ◽  
Mohamed Thariq Hameed Sultan ◽  
Azmin Shakrine Mohd Rafie
Keyword(s):  
Finite Element ◽  
Local Buckling ◽  
Structural Performance ◽  
Loading History ◽  
Element Simulation ◽  
Compression Members ◽  
History Of ◽  
Post Buckling ◽  
Thin Walled ◽  
Nonlinear Elastic

It is well known that the structural performance of thin-walled compression members is subject to the effects of local buckling and material yielding. Due to these effects, the compressive carrying capability of short strut members can be significantly reduced. This paper employs finite element simulation to examine the post-buckled response of thin-walled box-sections that covers complete loading history of the compression struts from the onset of elastic local buckling through the nonlinear elastic and elasto-plastic post-buckling phases of behaviour up to final collapse and unloading. A detailed account of the growth and redistribution of stresses on the surfaces is given in the paper. The results from finite element simulations are shown to compare well with the analytical method of analysis.

Post-buckling inelastic analysis of thin-walled metal members using the Generalised Beam Theory

2019 ◽  
Author(s):  
Miguel Abambres ◽  
Dinar Camotim ◽  
Miguel Abambres
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Beam Theory ◽  
Flow Theory ◽  
Promising Alternative ◽  
Inelastic Analysis ◽  
Post Buckling ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Generalised Beam Theory

A 2nd order inelastic Generalised Beam Theory (GBT) formulation based on the J2 flow theory is proposed, being a promising alternative to the shell finite element method. Its application is illustrated for an I-section beam and a lipped-C column. GBT results were validated against ABAQUS, namely concerning equilibrium paths, deformed configurations, and displacement profiles. It was concluded that the GBT modal nature allows (i) precise results with only 22% of the number of dof required in ABAQUS, as well as (ii) the understanding (by means of modal participation diagrams) of the behavioral mechanics in any elastoplastic stage of member deformation .

First and Second Order Elastoplastic Analyses of Thin-Walled Metal Members using Generalized Beam Theory

2018 ◽  
Author(s):  
Miguel Abambres
Keyword(s):  
Finite Element ◽  
Stainless Steel ◽  
Cross Section ◽  
Beam Theory ◽  
Second Order ◽  
Flow Rule ◽  
Non Linear ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Generalized Beam Theory

Original Generalized Beam Theory (GBT) formulations for elastoplastic first and second order (postbuckling) analyses of thin-walled members are proposed, based on the J2 theory with associated flow rule, and valid for (i) arbitrary residual stress and geometric imperfection distributions, (ii) non-linear isotropic materials (e.g., carbon/stainless steel), and (iii) arbitrary deformation patterns (e.g., global, local, distortional, shear). The cross-section analysis is based on the formulation by Silva (2013), but adopts five types of nodal degrees of freedom (d.o.f.) – one of them (warping rotation) is an innovation of present work and allows the use of cubic polynomials (instead of linear functions) to approximate the warping profiles in each sub-plate. The formulations are validated by presenting various illustrative examples involving beams and columns characterized by several cross-section types (open, closed, (un) branched), materials (bi-linear or non-linear – e.g., stainless steel) and boundary conditions. The GBT results (equilibrium paths, stress/displacement distributions and collapse mechanisms) are validated by comparison with those obtained from shell finite element analyses. It is observed that the results are globally very similar with only 9% and 21% (1st and 2nd order) of the d.o.f. numbers required by the shell finite element models. Moreover, the GBT unique modal nature is highlighted by means of modal participation diagrams and amplitude functions, as well as analyses based on different deformation mode sets, providing an in-depth insight on the member behavioural mechanics in both elastic and inelastic regimes.

Efficient Finite Element for Evaluation of Strain Concentrations in Concrete Coated Pipelines

2008 ◽  
Author(s):  
Svein Sævik ◽  
Martin Storheim ◽  
Erik Levold
Keyword(s):  
Finite Element ◽  
Numerical Study ◽  
Sandwich Beam ◽  
Beam Theory ◽  
Material Model ◽  
Body Motion ◽  
Theoretical Formulation ◽  
Concrete Material ◽  
Non Linear ◽  
Full Scale Tests

MARINTEK has developed software for detailed analysis of pipelines during installation and operation. As part of the software development a new coating finite element was developed in cooperation with StatoilHydro enabling efficient analysis of field joint strain concentrations of long concrete coated pipeline sections. The element was formulated based on sandwich beam theory and application of the Principle of Potential Energy. Large deformations and non-linear geometry effects were handled by a Co-rotated “ghost” reference description where elimination of rigid body motion was taken care of by referring to relative displacements in the strain energy term. The non-linearity related to shear interaction and concrete material behaviour was handled by applying non-linear springs and a purpose made concrete material model. The paper describes the theoretical formulation and numerical studies carried out to verify the model. The numerical study included comparison between model and full-scale tests as well as between model and other commercial software. At last a 3000 m long pipeline was analysed to demonstrate the strain concentration behaviour of a concrete coated pipeline exposed to high temperature snaking on the seabed.

Sign in / Sign up

Export Citation Format

Share Document