Shaking table test and numerical simulation on a mega-sub isolation system under near-fault ground motions with velocity pulses

2021 ◽  
Author(s):  
Xiangxiu Li ◽  
Ping Tan ◽  
Yao Wang ◽  
Ying Zhang ◽  
Xiaojun Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Shaking Table Test ◽  
Ground Motions ◽  
Shaking Table ◽  
Isolation System ◽  
Near Fault

Shaking Table Test Study on Seismic Responses of Base-Isolated Buildings under Near-Fault Ground Motions

2014 ◽  
Vol 1020 ◽  
pp. 457-462
Author(s):  
Miao Han ◽  
Yan Ling Duan ◽  
Huan Sun
Keyword(s):  
Shaking Table Test ◽  
Ground Motions ◽  
Shaking Table ◽  
Scale Model ◽  
Seismic Responses ◽  
Velocity Pulse ◽  
Isolation System ◽  
Near Fault ◽  
Test Study ◽  
Isolated Structures

The shaking table tests of a 1:7 scale model of three-floor steel frame base-isolated building was completed to study the seismic responses of base-isolated buildings under near-fault ground motions. Under the action of the typical near-fault seismic wave, the seismic responses of base-isolated structures increase with the increase of PGA. The maximum story displacements of super-structure decrease with increase of story. The velocity pulse has an adverse effect to acceleration responses of base-isolated structures. The isolation effect of base-isolated super-structures is still favorable under near-fault ground motions, but it will be necessary to add damping in isolation system or limit the displacement of bearings to prevent the excessive deformation of isolation layer.

Seismic Performance of Guideway Sliding Isolator with Gap Springs for Precision Machinery

2008 ◽  
Vol 11 (5) ◽  
pp. 511-524
Author(s):  
George C. Yao ◽  
Wen-Chun Huang ◽  
Fan-Ru Lin
Keyword(s):  
Shaking Table Test ◽  
Model Simulation ◽  
Shaking Table ◽  
Viscous Damping ◽  
Far Field ◽  
Seismic Excitations ◽  
Isolation System ◽  
Near Fault ◽  
Seismic Motion ◽  
Nonlinear Performance

The performance of gap springs in a guideway sliding isolator (GSI) system developed to protect precision machinery against seismic motion has been studied. A spring is initially distanced from the system by a gap, causing the isolation system to exhibit nonlinear performance once the gap is closed, reducing the chance of resonance. A full-scale shaking table test of a 22-ton specimen and a numerical model simulation in SAP2000 have been performed. The study shows that springs possessing the appropriate gaps are more effective in controlling relative displacements than is a pure friction system. The optimal gap for a system subjected to far-field earthquakes was found to be 5mm. In addition, supplemental viscous damping of less than 15% of the critical damping had no significant effect on the GSI system far-field seismic response, but it did reduce the relative displacements of the system for near-fault seismic excitations.

scholarly journals Seismic Performance Evaluations of Mega-Sub Isolation System

2016 ◽  
Vol 2016 ◽  
pp. 1-16 ◽  
Author(s):  
Xiangxiu Li ◽  
Ping Tan ◽  
Xiaojun Li ◽  
Aiwen Liu
Keyword(s):  
Numerical Simulation ◽  
Shaking Table Test ◽  
Shaking Table ◽  
Isolation System ◽  
Test Models ◽  
Story Drift ◽  
Structural Responses ◽  
Simulation Results ◽  
Dynamic Time ◽  
Better Than

This paper presents mega-sub isolation system. Shaking table test of the mega-sub isolation system is carried out in this paper. Three test models have been developed. One is called aseismic model, in which all the substructures are fixedly connected with the megastructures. The second one is known as isolated model, where the substructures are connected with the megastructures with isolators, and the last one is called the lower substructure consolidated (LSC) model, in which all the substructures except for the substructures at the lowest level, in other words, substructures at the second mega floor, are isolated from the megastructures. Nonlinear dynamic time analysis of the test models is conducted by SAP2000. Acceleration responses of the megastructure, story drift responses of the megastructure and the substructure, and the deformations of the isolation layer are compared between experimental and numerical simulation results. The results show that the experimental results and numerical simulation results agree well with each other, and the isolated model and LSC model perform better than the counterpart aseismic model. The structures with isolation devices can reduce the structural responses effectively and are much safer than the structure without isolation devices.

Shaking Table Test Study on Mid-Story Isolation Structures

2012 ◽  
Vol 446-449 ◽  
pp. 378-381
Author(s):  
Jian Min Jin ◽  
Ping Tan ◽  
Fu Lin Zhou ◽  
Yu Hong Ma ◽  
Chao Yong Shen
Keyword(s):  
Seismic Response ◽  
Seismic Isolation ◽  
Shaking Table Test ◽  
Base Isolation ◽  
Shaking Table ◽  
Natural Period ◽  
Isolation System ◽  
Isolation Layer ◽  
Lead Rubber Bearing ◽  
Complex Structural

Mid-story isolation structure is developing from base isolation structures. As a complex structural system, the work mechanism of base isolation structure is not entirely appropriate for mid-story isolation structure, and the prolonging of structural natural period may not be able to decrease the seismic response of substructure and superstructure simultaneously. In this paper, for a four-story steel frame model, whose prototype first natural period is about 1s without seismic isolation design, the seismic responses and isolation effectiveness of mid-story isolation system with lead rubber bearing are studied experimentally by changing the location of isolation layer. Respectively, the locations of isolation layer are set at bottom of the first story, top of the first story, top of the second story and top of the third story. The results show that mid-story isolation can reduce seismic response in general, and substructure acceleration may be amplified.

Performance of bi-directional elliptical rolling rods for base isolation of buildings under near-fault earthquakes

2017 ◽  
Vol 21 (5) ◽  
pp. 675-693 ◽  
Author(s):  
Aruna Rawat ◽  
Naseef Ummer ◽  
Vasant Matsagar
Keyword(s):  
Base Isolation ◽  
Ground Motions ◽  
Frictional Resistance ◽  
Curved Surface ◽  
Isolation System ◽  
Near Fault ◽  
Earthquake Ground Motions ◽  
Base Isolation System ◽  
Near Fault Earthquakes ◽  
Storey Building

Rolling base isolation system provides effective isolation to the structures from seismic base excitations by virtue of its low frictional resistance. Herein, dynamic analysis of flexible-shear type multi-storey building mounted on orthogonally placed elliptical rolling rod base isolation systems subjected to bi-directional components of near-fault earthquake ground motions is presented. The orthogonally placed rods would make it possible to resist the earthquake forces induced in the structure in both the horizontal directions. The curved surface of these elliptical rods has a self-restoring capability due to which the magnitude of peak isolator displacement and residual displacement is reduced. The roughness of the tempered curved surface of the rollers dissipates energy in motion due to frictional damping. The seismic performance of the multi-storey building mounted on the elliptical rolling rod base isolation system is compared with that mounted on the sliding pure-friction and cylindrical rolling rod systems. Parametric studies are conducted to examine the behavior of the building for different superstructure flexibilities, eccentricities of the elliptical rod, and coefficients of friction. It is concluded that the elliptical rolling rod base isolation system is effective in mitigation of damaging effects of the near-fault earthquake ground motions in the multi-storey buildings. Even under the near-fault earthquake ground motions, the base-isolated building mounted on the elliptical rolling rods shows considerable reduction in seismic response. The isolator displacement with the elliptical rolling rod base isolation system is less in comparison to the pure-friction and cylindrical rolling rod systems.

Sign in / Sign up

Export Citation Format

Share Document