THEORETICAL CHARACTERIZATION OF A HIGHLY ELECTROPHILIC CARBENE

2005 ◽  
Vol 04 (03) ◽  
pp. 823-832 ◽  
Author(s):  
JUAN F. VAN DER MAELEN URÍA ◽  
JAVIER RUIZ ◽  
SANTIAGO GARCÍA-GRANDA
Keyword(s):  
Density Functional ◽  
Theoretical Calculations ◽  
Basis Set ◽  
Basis Sets ◽  
Singlet Ground State ◽  
X Ray Diffraction ◽  
Dft Methods ◽  
Hartree Fock ◽  
Experimental Complex ◽  
Experimental Geometry

The experimental geometry obtained from single-crystal X-ray diffraction data for a metalladiphosphanyl carbene precursor is compared with the results of theoretical calculations made at the ab initio level by using Hartree–Fock (HF) and Density Functional Theory (DFT) methods over the carbene itself. Theoretical geometry optimizations for the singlet ground state of [ Mn(CO)4(PH2)2C: ]+ have been performed with several hybrid functionals and basis sets. Calculated geometries showed a perfect C 2v symmetry in the highest levels of calculation and were somewhat relaxed when compared with the experimental ones; for instance, with the largest basis set, the P–C–P angle found was 124.8°, whereas C–P bond distances were both 1.667 Å, compared to 103.5(3)° and 1.718(5) Å, respectively, from the experimental data. The absence of a ligand attached to the C : atom in the calculated structure, which is present in the form of iodine in the experimental complex, is probably responsible, to a certain extent, for the discrepancies. In addition to the structural computations, in order to theoretically quantify the highly electrophilic character expected for the carbene, electron affinities were calculated and found to be between 6.24 eV and 6.97 eV at different DFT levels of calculation, which confirmed the expectations. In this respect, a comparison with the analogous [Ru(CNH)4(PH2)2C:]2+ carbene is also made, showing the possibility of experimentally trapping the manganese carbene.

Theoreticalversusexperimental geometries in S-bridged manganese carbonyl complexes

2003 ◽  
Vol 36 (4) ◽  
pp. 1050-1055 ◽  
Author(s):  
Juan F. Van der Maelen Uría ◽  
Javier Ruiz ◽  
Santiago García-Granda
Keyword(s):  
Density Functional ◽  
Theoretical Calculations ◽  
Basis Sets ◽  
Medium Size ◽  
Carbonyl Complexes ◽  
X Ray Diffraction ◽  
Bond Lengths ◽  
Hartree Fock ◽  
Experimental Geometry ◽  
Manganese Carbonyl

The experimental geometry obtained from single-crystal X-ray diffraction for a number of binuclear S-bridged manganese complexes is compared with the results of theoretical calculations made at theab initiolevel by using Hartree–Fock and density functional theory methods with medium-size and large basis sets. The optimized geometries obtained were somewhat relaxed when compared with the experimental ones, with very similar bond and torsion angles but longer bond lengths. The mean square deviation for bond lengths (angles) was found to be between 0.046 Å (1.1°) and 0.004 Å (0.7°) depending on the theoretical model used.

scholarly journals Synthesis, X-Ray Crystallography, Thermal Analysis, and DFT Studies of Ni(II) Complex with 1-Vinylimidazole Ligand

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Fatih Şen ◽  
Ramazan Şahin ◽  
Muharrem Dinçer ◽  
Ömer Andaç ◽  
Murat Taş
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Basis Sets ◽  
Mulliken Charge ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Dft Methods ◽  
X Ray ◽  
X Ray Crystallography ◽  
The Density Functional Theory

The paper presents a combined experimental and computational study of hexa(1-vinylimidazole)Ni(II) perchlorate complex. The complex was prepared in the laboratory and crystallized in the monoclinic space group P21/n with a=8.442(5), b=13.686(8), c=16.041(9) Å, α=γ=90, β=96.638(5), and Z=1. The complex has been characterized structurally (by single-crystal X-Ray diffraction) and its molecular structure in the ground state has been calculated using the density functional theory (DFT) methods with 6-31G(d) and LanL2DZ basis sets. Thermal behaviour and stability of the complex were studied by TGA/DTA analyses. Besides, the nonlinear optical effects (NLO), molecular electrostatic potential (MEP), frontier molecular orbitals (FMO), and the Mulliken charge distribution were investigated theoretically.

scholarly journals Basis Set Effects in the Description of the Cl-O Bond in ClO and XClO/ClOX Isomers (X = H, O, and Cl) Using DFT and CCSD(T) Methods

2019 ◽  
Vol 2019 ◽  
pp. 1-23 ◽  
Author(s):  
Kenneth Irving ◽  
Martina Kieninger ◽  
Oscar N. Ventura
Keyword(s):  
Density Functional ◽  
Basis Set ◽  
Basis Sets ◽  
Enthalpies Of Formation ◽  
Isodesmic Reactions ◽  
Dft Methods ◽  
Functional Methods ◽  
The One ◽  
Isomeric Structures ◽  
Different Sources

The performance of a group of density functional methods of progressive complexity for the description of the ClO bond in a series of chlorine oxides was investigated. The simplest ClO radical species and the two isomeric structures XClO/ClOX for each X = H, Cl, and O were studied using the PW91, TPSS, B3LYP, PBE0, M06, M06-2X, BMK, and B2PLYP functionals. Geometry optimizations and reaction enthalpies and enthalpies of formation for each species were calculated using Pople basis sets and the (aug)-cc-pVnZ Dunning sets, with n = D, T, Q, 5, and 6. For the calculation of enthalpies of formation, atomization and isodesmic reactions were employed. Both the precision of the methods with respect to the increase of the basis sets, as well as their accuracy, were gauged by comparing the results with the more accurate CCSD(T) calculations, performed using the same basis sets as for the DFT methods. The results obtained employing composite chemical methods (G4, CBS-QB3, and W1BD) were also used for the comparisons, as well as the experimental results when they are available. The results obtained show that error compensation is the key for successful description of molecular properties (geometries and energies) by carefully selecting the method and basis sets. In general, expansion of the one-electron basis set to the limit of completeness does not improve results at the DFT level, but just the opposite. The enthalpies of formation calculated at the CCSD(T)/aug-cc-pV6Z for the species considered are generally in agreement with experimental determinations and the most accurate theoretical values. Different sources of error in the calculations are discussed in detail.

scholarly journals A Statistically Supported Antioxidant Activity DFT Benchmark—The Effects of Hartree–Fock Exchange and Basis Set Selection on Accuracy and Resources Uptake

Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 5058
Author(s):  
Maciej Spiegel ◽  
Andrzej Gamian ◽  
Zbigniew Sroka
Keyword(s):  
Density Functional ◽  
Optimal Level ◽  
Basis Set ◽  
Basis Sets ◽  
Linear Regression Models ◽  
Functional Theory ◽  
Hartree Fock ◽  
Diffuse Function ◽  
Vertical Electron Affinity ◽  
High Level

Polyphenolic compounds are now widely studied using computational chemistry approaches, the most popular of which is Density Functional Theory. To ease this process, it is critical to identify the optimal level of theory in terms of both accuracy and resource usage—a challenge we tackle in this study. Eleven DFT functionals with varied Hartree–Fock exchange values, both global and range-separated hybrids, were combined with 14 differently augmented basis sets to calculate the reactivity indices of caffeic acid, a phenolic acid representative, and compare them to experimental data or a high-level of theory outcome. Aside from the main course, a validation of the widely used Janak’s theorem in the establishment of vertical ionization potential and vertical electron affinity was evaluated. To investigate what influences the values of the properties under consideration, linear regression models were developed and thoroughly discussed. The results were utilized to compute the scores, which let us determine the best and worst combinations and make broad suggestions on the final option. The study demonstrates that M06–2X/6–311G(d,p) is the best fit for such research, and, curiously, it is not necessarily essential to include a diffuse function to produce satisfactory results.

Basis Set Effects in the Description of the Cl-O Bond in ClO and XClO Isomers (X=H,O,Cl) Using DFT and CCSD(T) Methods

2018 ◽  
Author(s):  
Oscar Ventura ◽  
Kenneth Irving ◽  
Martina Kieninger
Keyword(s):  
Density Functional ◽  
Basis Set ◽  
Basis Sets ◽  
Enthalpies Of Formation ◽  
Isodesmic Reactions ◽  
Dft Methods ◽  
Functional Methods ◽  
The One ◽  
Isomeric Structures ◽  
Different Sources

<p>The performance of a group of density functional methods of progressive complexity for the description of the ClO bond in a series of chlorine oxides was investigated. The simplest ClO radical species as well as the two isomeric structures XClO/ClOX for each X=H, Cl and O were studied using the PW91, TPSS, B3LYP, PBE0, M06, M06-2X, BMK and B2PLYP functionals. Geometry optimizations as well as reaction enthalpies and enthalpies of formation for each species were calculated using Pople basis sets and the (aug)-cc-pVnZ Dunning sets, with n=2-6. For the calculation of enthalpies of formation, atomization as well as isodesmic reactions were employed. Both the precision of the methods with respect to the increase of the basis sets, as well as their accuracy, were gauged by comparing the results with the more accurate CCSD(T) calculations, performed using the same basis sets as for the DFT methods. The results obtained employing composite chemical methods (G4, CBS-QB3 and W1BD) were also used for the comparisons, as well as the experimental results when they are available. The results obtained show that error compensation is the key for successful description of molecular properties (geometries and energies) by carefully selecting method and basis sets. In general, expansion of the one-electron basis set to the limit of completeness does not improve results at the DFT level, but just the opposite. The enthalpies of formation calculated at the CCSD(T)/aug-cc-pV6Z for the species considered are generally in agreement with experimental determinations, and the most accurate derived theoretically up to present. Different sources of error in the calculations are discussed in detail.</p>

A study of experimental and theoretical analysis of N-cyclohexylmethacrylamide monomer based on DFT and HF computations

2016 ◽  
Vol 45 (5) ◽  
pp. 301-307 ◽  
Author(s):  
Feride Akman ◽  
Nevin Çankaya
Keyword(s):  
Density Functional ◽  
Functional Group ◽  
Theoretical Calculations ◽  
Calculated Data ◽  
Basis Set ◽  
Polymer Science ◽  
Content Type ◽  
Hartree Fock ◽  
Good Accord ◽  
Experimental Values

Purpose This paper aims to synthesise and characterise N-cyclohexylmethacrylamide (NCMA) monomer which contains thermosensitive group. The characterisation of monomer was performed both theoretically and experimentally. Design/methodology/approach The monomer was prepared by reacting cyclohexylamine with methacryloyl chloride in the presence of triethylamine at room temperature. The synthesised monomer was characterised by using not only Density Functional Theory (DFT) and Hartree–Fock (HF) with the Gaussian 09 software but also fourier transform infrared (FT–IR), 1H and 13C nuclear magnetic resonance (NMR) spectroscopy. Findings Both the experimental and the theoretical methods demonstrated that the monomer was successfully synthesised. The vibrational frequencies, the molecular structural geometry, such as optimised geometric bond angles, bond lengths and the Mulliken atomic charges of NCMA were investigated by using DFT/B3LYP and HF methods with the 3-21G* basis set. The experimental results were compared with theoretical values. The results revealed that the calculated frequencies were in good accord with the experimental values. Besides, frontier molecular orbitals (FMOs) and molecular electrostatic potential of NCMA were investigated by theoretical calculations at the B3LYP/3–21G* basis set. Research limitations/implications Monomer and polymer containing a thermosensitive functional group have attracted great interest from both industrial and academic fields. Their characterisation can provide great opportunities for polymer science by using DFT and HF methods. Originality/value The monomer containing a thermosensitive functional group and a various polymer may be prepared by using DFT and HF methods described in this paper. The calculated data are greatly important to provide insight into molecular analysis and then used in technological applications.

Theoretical Studies on the Structure and Spectroscopic Properties of 2,4-D (2,4-Diclorofenoxiacetic Acid)

2012 ◽  
Vol 2 (1) ◽  
pp. 1-11
Author(s):  
María G. Andino ◽  
Mariela I. Profeta ◽  
Jorge M. Romero ◽  
Nelly L. Jorge ◽  
Eduardo A. Castro
Keyword(s):  
Density Functional ◽  
Theoretical Calculations ◽  
Spectroscopic Properties ◽  
Uv Spectra ◽  
Basis Set ◽  
Basis Sets ◽  
Electronic Effects ◽  
B3lyp Method ◽  
Molecular Stability ◽  
2,4 Dichlorophenoxyacetic Acid

The 2,4-dichlorophenoxyacetic acid (2,4-D) is applied to and recovered from the leaf surfaces of garden bean and corn plants. This paper examines the theoretical study of the 2,4-D IR and UV spectra as well as the determination of its optimized molecular structure. Theoretical calculations are performed at the density functional theory (DFT) levels. The different structural and electronic effects determining the molecular stability of the conformers are discussed in a comparative fashion. The optimized geometry was calculated via the B3LYP method with 6-311G(d,p) and 6-311++G(d,p) basis sets and the FT-IR spectra was calculated by the density functional B3LYP method with the 6-311++G(d,p) basis set. The scaled theoretical wavenumbers show good agreement with the experimental values. A detailed interpretation of the infrared spectra of 2,4-D is reported.

scholarly journals Vibrational spectra of aniline in gas phase: An ab-initio study

2010 ◽  
Vol 7 (2) ◽  
pp. 449-455
Author(s):  
S. D. S. Chauhan ◽  
A.K. Sharma ◽  
R. Kumar ◽  
D. Kulshreshtha ◽  
R. Gupta ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Gas Phase ◽  
Density Functional ◽  
Basis Set ◽  
Basis Sets ◽  
Ab Initio Study ◽  
Functional Theory ◽  
Hartree Fock ◽  
Modes Of Vibration ◽  
Experimental Findings

Vibrational frequencies of aniline in gas phase have been calculated and each of their modes of vibration assigned properly at RHF and DFT with 6-31G(d) basis set. In the present study, it has been observed that the 6-31G(d) basis set at both RHF and DFT levels of calculations provides better agreement to the experimental findings as compared to other basis sets. Simultaneously, Density functional theory is found to be superior to its counterpart Hartree Fock method.

Benchmarking Density Functionals, Basis Sets, and Solvent Models in Predicting Thermodynamic Hydricities of Organic Hydrides

2021 ◽  
Author(s):  
Christina Yeo ◽  
Minh Nguyen ◽  
Lee-Ping Wang
Keyword(s):  
Density Functional ◽  
Mean Squared Error ◽  
Theoretical Calculations ◽  
Computational Cost ◽  
Hydrogen Gas ◽  
Basis Set ◽  
Basis Sets ◽  
Density Functionals ◽  
Solvent Models ◽  
Solvent Model

Many renewable energy technologies, such as hydrogen gas synthesis and carbon dioxide reduction, rely on chemical reactions involving hydride anions. When selecting molecules to be used in such applications, an important quantity to consider is the thermodynamic hydricity, which is the free energy required for a species to donate a hydride anion. Theoretical calculations of thermodynamic hydricity depend on several parameters, mainly the density functional, basis set, and solvent model. In order to assess the effects of the above three parameters, we carry out hydricity calculations for a set of molecules with known experimental hydricity values, generate linear �fits, and compare the R-squared, root-mean-squared error, and Akaike Information Criterion across different combinations of density functionals, basis sets, and solvent models. Based on these results we are able to quantify the accuracy of theoretical predictions of hydricity and recommend the parameters with the best compromise between accuracy and computational cost.

COMPARATIVE INVESTIGATION OF THE EFFECT OF TYPE OF DENSITY FUNCTIONAL IN THE DETERMINATION OF GEOMETRICAL PARAMETERS IN A Cu COMPLEX

2013 ◽  
Vol 12 (07) ◽  
pp. 1350066 ◽  
Author(s):  
JABER JAHANBIN SARDROODI ◽  
ALIREZA RASTKAR ◽  
NEGAR RAD YOUSEFNIA ◽  
JAFAR AZAMAT
Keyword(s):  
Density Functional ◽  
Comparative Investigation ◽  
Basis Set ◽  
Basis Sets ◽  
Geometrical Parameters ◽  
Teller Distortion ◽  
Hartree Fock ◽  
Jahn Teller ◽  
Jahn Teller Distortion

The effects of short-range electron correlation, long-range electron exchange, local and nonlocal parts of density, higher order gradients of density, and adding some percentage of Hartree–Fock exchange to the functional on the prediction of geometrical parameters were investigated. A copper complex namely 1,2-bis(1,4,7-triaza-1-cyclononyl) ethane copper (II) with Jahn–Teller distortion in octahedral geometry was used to evaluate the performance of 50 commonly available density functionals. The standard 3-21G basis set was used for all light elements, while pseudo potential LANL2DZ was used for the copper atom. The best bond lengths and bond angles were obtained using M05-2x and OP functionals respectively. Also in order to more accurate survey the performance of B3LYP, we used this functional with two all-electron basis sets (6-31G and 3-21G) and three basis sets involving effective core potentials (LANL2DZ/3-21G, LANL2DZ, and LACVP).

Sign in / Sign up

Export Citation Format

Share Document