Rapid dehazing algorithm based on large-scale median filtering for high-resolution visible near-infrared remote sensing images

2014 ◽  
Vol 12 (05) ◽  
pp. 1461010 ◽  
Author(s):  
Changmiao Hu ◽  
Ping Tang
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Land Surface ◽  
Large Scale ◽  
Near Infrared ◽  
Low Frequency ◽  
Median Filtering ◽  
Remote Sensing Images ◽  
Infrared Band ◽  
Remote Sensing Image Processing

In recent years, China's demand for satellite remote sensing images increased. Thus, the country launched a series of satellites equipped with high-resolution sensors. The resolutions of these satellites range from 30 m to a few meters, and the spectral range covers the visible to the near-infrared band. These satellite images are mainly used for environmental monitoring, mapping, land surface classification and other fields. However, haze is an important factor that often affects image quality. Thus, dehazing technology is becoming a critical step in high-resolution remote sensing image processing. This paper presents a rapid algorithm for dehazing based on a semi-physical haze model. Large-scale median filtering technique is used to extract large areas of bright, low-frequency information from images to estimate the distribution and thickness of the haze. Four images from different satellites are used for experiment. Results show that the algorithm is valid, fast, and suitable for the rapid dehazing of numerous large-sized high-resolution remote sensing images in engineering applications.

scholarly journals Efficient Patch-Wise Semantic Segmentation for Large-Scale Remote Sensing Images

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3232 ◽  
Author(s):  
Yan Liu ◽  
Qirui Ren ◽  
Jiahui Geng ◽  
Meng Ding ◽  
Jiangyun Li
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Large Scale ◽  
Semantic Segmentation ◽  
Remote Sensing Image ◽  
Training Data ◽  
Land Resources ◽  
Remote Sensing Images ◽  
Training Strategy ◽  
The Impact

Efficient and accurate semantic segmentation is the key technique for automatic remote sensing image analysis. While there have been many segmentation methods based on traditional hand-craft feature extractors, it is still challenging to process high-resolution and large-scale remote sensing images. In this work, a novel patch-wise semantic segmentation method with a new training strategy based on fully convolutional networks is presented to segment common land resources. First, to handle the high-resolution image, the images are split as local patches and then a patch-wise network is built. Second, training data is preprocessed in several ways to meet the specific characteristics of remote sensing images, i.e., color imbalance, object rotation variations and lens distortion. Third, a multi-scale training strategy is developed to solve the severe scale variation problem. In addition, the impact of conditional random field (CRF) is studied to improve the precision. The proposed method was evaluated on a dataset collected from a capital city in West China with the Gaofen-2 satellite. The dataset contains ten common land resources (Grassland, Road, etc.). The experimental results show that the proposed algorithm achieves 54.96% in terms of mean intersection over union (MIoU) and outperforms other state-of-the-art methods in remote sensing image segmentation.

scholarly journals Remote Sensing Landslide Recognition Based on Convolutional Neural Network

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Yu Wang ◽  
Xiaofei Wang ◽  
Junfan Jian
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Convolutional Neural Network ◽  
Large Scale ◽  
Vegetation Index ◽  
Near Infrared ◽  
Spatial Information ◽  
Spectral Characteristics ◽  
Remote Sensing Images ◽  
Landslide Event

Landslides are a type of frequent and widespread natural disaster. It is of great significance to extract location information from the landslide in time. At present, most articles still select single band or RGB bands as the feature for landslide recognition. To improve the efficiency of landslide recognition, this study proposed a remote sensing recognition method based on the convolutional neural network of the mixed spectral characteristics. Firstly, this paper tried to add NDVI (normalized difference vegetation index) and NIRS (near-infrared spectroscopy) to enhance the features. Then, remote sensing images (predisaster and postdisaster images) with same spatial information but different time series information regarding landslide are taken directly from GF-1 satellite as input images. By combining the 4 bands (red + green + blue + near-infrared) of the prelandslide remote sensing images with the 4 bands of the postlandslide images and NDVI images, images with 9 bands were obtained, and the band values reflecting the changing characteristics of the landslide were determined. Finally, a deep learning convolutional neural network (CNN) was introduced to solve the problem. The proposed method was tested and verified with remote sensing data from the 2015 large-scale landslide event in Shanxi, China, and 2016 large-scale landslide event in Fujian, China. The results showed that the accuracy of the method was high. Compared with the traditional methods, the recognition efficiency was improved, proving the effectiveness and feasibility of the method.

scholarly journals Attention-Based Pyramid Network for Segmentation and Classification of High-Resolution and Hyperspectral Remote Sensing Images

2020 ◽  
Vol 12 (21) ◽  
pp. 3501
Author(s):  
Qingsong Xu ◽  
Xin Yuan ◽  
Chaojun Ouyang ◽  
Yue Zeng
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Image Classification ◽  
Large Scale ◽  
Feature Fusion ◽  
Spectral Information ◽  
Spatial Problem ◽  
Remote Sensing Images ◽  
Heavy Weight

Unlike conventional natural (RGB) images, the inherent large scale and complex structures of remote sensing images pose major challenges such as spatial object distribution diversity and spectral information extraction when existing models are directly applied for image classification. In this study, we develop an attention-based pyramid network for segmentation and classification of remote sensing datasets. Attention mechanisms are used to develop the following modules: (i) a novel and robust attention-based multi-scale fusion method effectively fuses useful spatial or spectral information at different and same scales; (ii) a region pyramid attention mechanism using region-based attention addresses the target geometric size diversity in large-scale remote sensing images; and (iii) cross-scale attention in our adaptive atrous spatial pyramid pooling network adapts to varied contents in a feature-embedded space. Different forms of feature fusion pyramid frameworks are established by combining these attention-based modules. First, a novel segmentation framework, called the heavy-weight spatial feature fusion pyramid network (FFPNet), is proposed to address the spatial problem of high-resolution remote sensing images. Second, an end-to-end spatial-spectral FFPNet is presented for classifying hyperspectral images. Experiments conducted on ISPRS Vaihingen and ISPRS Potsdam high-resolution datasets demonstrate the competitive segmentation accuracy achieved by the proposed heavy-weight spatial FFPNet. Furthermore, experiments on the Indian Pines and the University of Pavia hyperspectral datasets indicate that the proposed spatial-spectral FFPNet outperforms the current state-of-the-art methods in hyperspectral image classification.

High-Throughput, Resource-Efficient Multi-Dimensional Parallel Architecture for Space-Borne Sea-Land Segmentation

2020 ◽  
pp. 2150027
Author(s):  
Cunguang Zhang ◽  
Hongxun Jiang ◽  
Riwei Pan ◽  
Haiheng Cao ◽  
Mingliang Zhou
Keyword(s):  
Remote Sensing ◽  
High Throughput ◽  
Large Scale ◽  
Parallel Architecture ◽  
Remote Sensing Image ◽  
Satellite System ◽  
Peak Performance ◽  
Remote Sensing Images ◽  
Block Level ◽  
Remote Sensing Image Processing

Sea-land segmentation based on edge detection is commonly utilized in ship detection, coastline extraction, and satellite system applications due to its high accuracy and rapid speed. Pixel-level distribution statistics do not currently satisfy the requirements for high-resolution, large-scale remote sensing image processing. To address the above problem, in this paper, we propose a high-throughput hardware architecture for sea-land segmentation based on multi-dimensional parallel characteristics. The proposed architecture is well suited to wide remote sensing images. Efficient multi-dimensional block level statistics allow for relatively infrequent pixel-level memory access; a boundary block tracking process replaces the whole-image scanning process, markedly enhancing efficiency. The tracking efficiency is further improved by a convenient two-step scanning strategy that feeds back the path state in a timely manner for a large number of blocks in the same direction appearing in the algorithm. The proposed architecture was deployed on Xilinx Virtex k7-410t to find that its practical processing time for a [Formula: see text] remote sensing image is only about 0.4[Formula: see text]s. The peak performance is 1.625[Formula: see text]gbps, which is higher than other FPGA implementations of segmentation algorithms. The proposed structure is highly competitive in processing wide remote sensing images.

scholarly journals A Mixed Property-Based Automatic Shadow Detection Approach for VHR Multispectral Remote Sensing Images

2018 ◽  
Vol 8 (10) ◽  
pp. 1883 ◽  
Author(s):  
Hongyin Han ◽  
Chengshan Han ◽  
Xucheng Xue ◽  
Changhong Hu ◽  
Liang Huang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Near Infrared ◽  
Shadow Detection ◽  
Detection Methods ◽  
Remote Sensing Images ◽  
Multispectral Remote Sensing ◽  
The Difference ◽  
Mixed Property ◽  
Very High

Shadows in very high-resolution multispectral remote sensing images hinder many applications, such as change detection, target recognition, and image classification. Though a wide variety of significant research has explored shadow detection, shadow pixels are still more or less omitted and are wrongly confused with vegetation pixels in some cases. In this study, to further manage the problems of shadow omission and vegetation misclassification, a mixed property-based shadow index is developed for detecting shadows in very high-resolution multispectral remote sensing images based on the difference of the hue component and the intensity component between shadows and nonshadows, and the difference of the reflectivity of the red band and the near infrared band between shadows and vegetation cover in nonshadows. Then, the final shadow mask is achieved, with an optimal threshold automatically obtained from the index image histogram. To validate the effectiveness of our approach for shadow detection, three test images are selected from the multispectral WorldView-3 images of Rio de Janeiro, Brazil, and are tested with our method. When compared with other investigated standard shadow detection methods, the resulting images produced by our method deliver a higher average overall accuracy (95.02%) and a better visual sense. The highly accurate data show the efficacy and stability of the proposed approach in appropriately detecting shadows and correctly classifying shadow pixels against the vegetation pixels for very high-resolution multispectral remote sensing images.

scholarly journals ICA-ASIFT-Based Multi-Temporal Matching of High-Resolution Remote Sensing Urban Images

2016 ◽  
Vol 16 (5) ◽  
pp. 34-49 ◽  
Author(s):  
Fenghua Huang ◽  
Zhengyuan Mao ◽  
Wenzao Shi
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Large Scale ◽  
Feature Point ◽  
Feature Points ◽  
Affine Invariant ◽  
Remote Sensing Images ◽  
Matching Accuracy ◽  
Affine Transform ◽  
Urban Images

Abstract While SIFT (Scale Invariant Feature Transform) features are used to match High-Resolution (HR) remote sensing urban images captured at different phases with large scale and view variations, feature points are few and the matching accuracy is low. Although replacing SIFT with fully affine invariant features ASIFT (Affine-SIFT) can increase the number of feature points, it results in matching inefficiency and a non-uniform distribution of matched feature point pairs. To address these problems, this paper proposes the novel matching method ICA-ASIFT, which matches HR remote sensing urban images captured at different phases by using an Independent Component Analysis algorithm (ICA) and ASIFT features jointly. First, all possible affine deformations are modeled for the image transform, extracting ASIFT features of remote sensing images captured at different times. The ICA algorithm reduces the dimensionality of ASIFT features and improves matching efficiency of subsequent ASIFT feature point pairs. Next, coarse matching is performed on ASIFT feature point pairs through the algorithms of Nearest Vector Angle Ratio (NVAR), Direction Difference Analysis (DDA) and RANdom SAmple Consensus (RANSAC), eliminating apparent mismatches. Then, fine matching is performed on rough matched point pairs using a Neighborhoodbased Feature Graph Matching algorithm (NFGM) to obtain final ASIFT matching point pairs of remote sensing images. Finally, final matching point pairs are used to compute the affine transform matrix. Matching HR remote sensing images captured at different phases is achieved through affine transform. Experiments are used to compare the performance of ICA-ASFIT and three other algorithms (i.e., Harris- SIFT, PCA-SIFT, TD-ASIFT) on HR remote sensing images captured at different times in different regions. Experimental results show that the proposed ICA-ASFIT algorithm effectively matches HR remote sensing urban images and outperforms other algorithms in terms of matching accuracy and efficiency.

scholarly journals An Improved Faster R-CNN Method to Detect Tailings Ponds from High-Resolution Remote Sensing Images

2021 ◽  
Vol 13 (11) ◽  
pp. 2052
Author(s):  
Dongchuan Yan ◽  
Guoqing Li ◽  
Xiangqiang Li ◽  
Hao Zhang ◽  
Hua Lei ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Deep Learning ◽  
High Resolution ◽  
High Precision ◽  
Large Scale ◽  
Dam Failure ◽  
Remote Sensing Images ◽  
Feature Maps ◽  
Tailings Pond ◽  
Tailings Ponds

Dam failure of tailings ponds can result in serious casualties and environmental pollution. Therefore, timely and accurate monitoring is crucial for managing tailings ponds and preventing damage from tailings pond accidents. Remote sensing technology facilitates the regular extraction and monitoring of tailings pond information. However, traditional remote sensing techniques are inefficient and have low levels of automation, which hinders the large-scale, high-frequency, and high-precision extraction of tailings pond information. Moreover, research into the automatic and intelligent extraction of tailings pond information from high-resolution remote sensing images is relatively rare. However, the deep learning end-to-end model offers a solution to this problem. This study proposes an intelligent and high-precision method for extracting tailings pond information from high-resolution images, which improves deep learning target detection model: faster region-based convolutional neural network (Faster R-CNN). A comparison study is conducted and the model input size with the highest precision is selected. The feature pyramid network (FPN) is adopted to obtain multiscale feature maps with rich context information, the attention mechanism is used to improve the FPN, and the contribution degrees of feature channels are recalibrated. The model test results based on GoogleEarth high-resolution remote sensing images indicate a significant increase in the average precision (AP) and recall of tailings pond detection from that of Faster R-CNN by 5.6% and 10.9%, reaching 85.7% and 62.9%, respectively. Considering the current rapid increase in high-resolution remote sensing images, this method will be important for large-scale, high-precision, and intelligent monitoring of tailings ponds, which will greatly improve the decision-making efficiency in tailings pond management.

Sign in / Sign up

Export Citation Format

Share Document