SYNTHESIS OF FULLEROPYRROLIDINE PYRIDINIUM SALTS BY FACILE ANION EXCHANGE AND THEIR SOLUBILITY

NANO ◽  
2009 ◽  
Vol 04 (05) ◽  
pp. 299-302
Author(s):  
CHRISTOPHER M. TOLLAN ◽  
JOSE A. POMPOSO ◽  
DAVID MECERREYES

Several ionic fullerene salts have been prepared based on a fulleropyrrolidine pyridinium cation and four different anions. The initial ionic fullerene can be easily prepared by quaternization of a pyridine-appended fulleropyrrolidine derivative in high yield. Anion exchange is a simple procedure giving several different salts of varying polarity. In addition to their characterization, the quantitative solubility of these salts has been studied in seven different solvents, including an imidazolium ionic liquid.

2012 ◽  
Vol 427 ◽  
pp. 173-178
Author(s):  
Ying Jie Cai ◽  
Xiu Jie Ji ◽  
Bo Wen Cheng ◽  
Dong Dong Xie ◽  
Qiu Ling Wang ◽  
...  

The title compound (C7H9ClN2, Mr = 156.61), an imidazolium ionic liquid with alkynyl, was synthesized by an improved method in high yield. FT-IR,1H NMR,13C NMR and elemental analysis were performed to characterize the molecule of the ionic liquid, and its crystal structure was determined by single-crystal X-ray structure analysis. The results indicate that the improved procedure is very feasible and 96% yield. The crystal structure analysis will be conducive to clarify the relationship of structure and function for ionic liquid with alkynyl the compound.


2017 ◽  
Vol 41 (23) ◽  
pp. 14545-14550 ◽  
Author(s):  
Yujing Zuo ◽  
Zhiming Gou ◽  
Zhaoyue Li ◽  
Jinwan Qi ◽  
Shengyu Feng

The synthesis of a series of polysiloxane-based ionic liquids (PNLs) is reported via straightforward thiol–ene reaction with high yield using three kinds of imidazolium ionic liquid monomers.


2020 ◽  
Vol 17 (8) ◽  
pp. 648-653
Author(s):  
Akbar Massoumi Shahi ◽  
Mohammad Nikpassand ◽  
Leila Zare Fekri

Aims: synthesis of pyrano[c-2,3]chromens with Ionic Liquid catalyst with simple method. Background: Synthesis of pyrano[c]coumarins has a special place in the structure due to two bioactive compounds in its structure and attracts a great deal of attention in this research work, it has been attempted to attach chromatically valuable skeletons to them and synthesize the pyrano [c] coumarines, which can potentially have high biological properties. For this purpose, electrophilic β-ketoester ringing in the presence of ionic liquid catalysts was used. While optimizing the catalyst recovery, it is possible to synthesize several coumarine pyrano[ c]derivatives with high yield. Objective: This paper describes an efficient procedure for the multi-component reaction of aromatic aldehydes, 4,4,4-Trifluoro-1-phenyl-1,3-butanedione and 4-hydroxycoumarinwhich catalyzed by Ioniq liquid (OlmDSA), at room temperature. This catalyst was synthesized with new simple procedure. This protocol has advantages of simplicity, mild condition and high yield. Materials and Methods: After formation of a new stain corresponding to the alkene intermediate, 4-hydroxy coumarin (1 mM) was added. The reaction was progressed by thin layer chromatography in a 1: 2 ratio solvent containing ethyl acetate and hexane. The reaction mixture was then stirred for one hour. After the reaction was complete, the catalyst was first removed by washing. Ethanol was then added to the reaction residue and washed and finally filtered. The residual solid on the filter paper after drying was considered as the product and was taken to confirm. its structure, melting point and spectra. The following is a general overview of the reaction. Results and Discussion: In addition to the advantages mentioned for this tri-component reaction, the conservation of the coumarin ring is very important in this research design because it is formed in many of the reported open reactions and phenolic ring. Conclusion: The benefits of this work include simple reaction steps, review of reaction progress by TLC chromatography, simple separation of the catalyst by washing and reuse for three times without any reduction in yield and high reaction yield.


2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Young-Seok Kim ◽  
Seong-Ho Choi

Polymeric anion-exchange membranes (AEMs) were synthesized via the photocopolymerization of a vinyl imidazolium ionic liquid, with 1-butyl-3-(4-vinylbenzyl)imidazolium chloride ([BVBI][Cl]) as the anion-exchange group and styrene, acrylonitrile, and divinylbenzene as cross-linked agents. The physical, mechanical, and electrochemical properties of the prepared AEMs such as water uptake (%), swelling degree (%), ion-exchange capacity (mmol/g), thermal stability, tensile strength (Mpa), tensile modulus (Mpa), elongation (%), and ionic conductivity (S/cm) were evaluated. The synthesized AEMs were shown to have good physical, mechanical, and electrochemical properties for application of a capacitive energy extraction Donnan potential (CDP) device membrane. The CDP device was fabricated by using the synthesized AEM. The specific capacitance of the CDP device with AEM was determined as 2.53 F/g and 3.44 F/g by galvanostatic charge/discharge and cyclic voltammetry, respectively. The synthesized AEM with imidazolium ionic liquid can be applied as the CDP device membrane.


2021 ◽  
Author(s):  
Xiaohan Zhang ◽  
Le Gao ◽  
Liying Niu ◽  
Xiaodong Bi

Molecularly imprinted polymers (MIPs) possess target-customized and range-adjustable selectivity, and hence have been attracting increasing efforts to develop new synthetic methods and new forms of applications. By wisely choosing functional...


2017 ◽  
Vol 41 (21) ◽  
pp. 12801-12807 ◽  
Author(s):  
Rafał Bielas ◽  
Dariusz Łukowiec ◽  
Dorota Neugebauer

Poly[trimethylammonium (meth)acrylate]s decorated by salicylate anions were investigated as drug carriers. Efficient exchange of drug was provided by phosphate anions contained in the medium within 4 h.


Polymer ◽  
2014 ◽  
Vol 55 (16) ◽  
pp. 3305-3313 ◽  
Author(s):  
William M. McDanel ◽  
Matthew G. Cowan ◽  
Trevor K. Carlisle ◽  
Anna K. Swanson ◽  
Richard D. Noble ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document