A Study on Evaluation of ADPI and Ventilation Performance of a Small Auditorium with Unevenly Arranged Return Diffusers

2017 ◽  
Vol 25 (04) ◽  
pp. 1750029
Author(s):  
Yong-il Kwon
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Numerical Study ◽  
Side Wall ◽  
Air Distribution ◽  
Rear Wall ◽  
System Parameters ◽  
Ventilation Efficiency ◽  
Ventilation Performance ◽  
Air Diffusion

The ventilation performance and thermal comfort characteristics on placing the supply or return diffusers for the air distribution systems applied to an auditorium with high ceiling heights must be inherently considered. A numerical study has been conducted to simulate the airflow and ventilation characteristics in a small auditorium with the uniformly installed supply diffusers on the ceiling surface, and with the unevenly installed return diffusers on the side wall of the stage, the left and rear wall. It is the objective of the present study to investigate the effects of various air distribution system parameters on air diffusion performance index (ADPI), air change efficiency and scale of ventilation efficiency NO.4 (SVE4) of return diffusers in the auditorium with the movable audience seat on the flat floor. This paper focuses mainly on the effect of the unevenly installed return diffusers on the low part of the side wall of the auditorium with the movable audience seat.

scholarly journals Numerical Study on Coupled Operation of Stratified Air Distribution System and Natural Ventilation under Multi-Variable Factors in Large Space Buildings

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8130
Author(s):  
Ziwen Dong ◽  
Liting Zhang ◽  
Yongwen Yang ◽  
Qifen Li ◽  
Hao Huang
Keyword(s):  
Thermal Comfort ◽  
Working Conditions ◽  
Distribution System ◽  
Distribution Systems ◽  
Natural Ventilation ◽  
Numerical Study ◽  
Air Distribution ◽  
Large Space ◽  
Air Conditioners ◽  
Air Supply

Stratified air distribution systems are commonly used in large space buildings. The research on the airflow organization of stratified air conditioners is deficient in terms of the analysis of multivariable factors. Moreover, studies on the coupled operation of stratified air conditioners and natural ventilation are few. In this paper, taking a Shanghai Airport Terminal departure hall for the study, air distribution and thermal comfort of the cross-section at a height of 1.6 m are simulated and compared under different working conditions, and the effect of natural ventilation coupling operation is studied. The results show that the air distribution is the most uniform and the thermal comfort is the best (predicted mean vote is 0.428, predicted percentage of dissatisfaction is 15.2%) when the working conditions are 5.9% air supply speed, 11 °C cooling temperature difference and 0° air supply angle. With the coupled operation of natural ventilation, the thermal comfort can be improved from Grade II to Grade I.

scholarly journals Experimental Investigation of the Ventilation Performance of Different Air Distribution Systems in an Office Environment—Cooling Mode

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1354 ◽  
Author(s):  
Arman Ameen ◽  
Mathias Cehlin ◽  
Ulf Larsson ◽  
Taghi Karimipanah
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Ventilation System ◽  
Impinging Jet ◽  
Air Distribution ◽  
Displacement Ventilation ◽  
Cooling Mode ◽  
Distribution Method ◽  
Ventilation Performance ◽  
Velocity Turbulence

The performance of a newly designed corner impinging jet air distribution method with an equilateral triangle cross section was evaluated experimentally and compared to that of two more traditional methods (mixing and displacement ventilation). At nine evenly chosen positions with four standard vertical points, air velocity, turbulence intensity, temperature, and tracer gas decay measurements were conducted for all systems. The results show that the new method behaves as a displacement ventilation system, with high air change effectiveness and stratified flow pattern and temperature field. Both local air change effectiveness and air exchange effectiveness of the corner impinging jet showed high quality and promising results, which is a good indicator of ventilation effectiveness. The results also indicate that there is a possibility to slightly lower the airflow rates for the new air distribution system, while still meeting the requirements for thermal comfort and indoor air quality, thereby reducing fan energy usage. The draught rate was also lower for corner impinging jet compared to the other tested air distribution methods. The findings of this research show that the corner impinging jet method can be used for office ventilation.

Energy Use Comparison of Air Distribution Systems Serving a Section of a School Building

2012 ◽  
Author(s):  
Stillman Jordan ◽  
Randall D. Manteufel
Keyword(s):  
Total Energy ◽  
Distribution System ◽  
Energy Recovery ◽  
Distribution Systems ◽  
Energy Savings ◽  
Ventilation System ◽  
Space Distribution ◽  
Air Distribution ◽  
Displacement Ventilation ◽  
Humid Climate

An optimal air distribution design accomplishes both comfort and ventilation requirements while consuming as little energy as possible. This paper analyzes four different air distribution systems and technologies including single duct variable air volume air handlers, chilled beam cooling systems, total energy recovery wheels, displacement ventilation, and dedicated outside air systems; in an effort to determine the best air distribution system for a representative section of a school in hot and humid climate. The effectiveness of the air distribution systems is evaluated by analyzing how the different technologies take advantage of the natural convective properties of air to create a comfortable environment for the occupied region of the space. Distribution effectiveness and energy consumption must be weighed against considerations such as system complexity and ease of operation. This paper compares several alternative air distribution systems to a baseline single inlet VAV system that is commonly used in new schools designed today. Calculations show that the total energy recovery wheels result in a 16% energy savings over the baseline air distribution system because of the large amount of outside air required in school buildings. Chilled beams are not well suited for schools because of the large amount of outside air required by the space and the sophisticated design and operation needed to prevent condensation from occurring at the chilled beam. The results show that the air distribution system that consumes the least amount of energy is a displacement ventilation system. The system also inherently promotes better indoor air quality as it allows air to naturally rise out and return out of the space with minimal mixing of contaminates that may be recirculated within the room for others to breath. The displacement ventilation system’s overall energy savings of 20% over the baseline is mainly attributed to its total energy recovery wheel and the system’s ability to drastically reduce the cooling load seen by the air cooled chiller by effectively ventilating spaces using less outside air.

CFD-Based Parametric Analysis on the Performance of Personalized Partition Air Distribution Systems

Solar Energy ◽  
2006 ◽  
Author(s):  
Kybum Jeong ◽  
Moncef Krarti ◽  
Zhiqiang Zhai
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Distribution System ◽  
Distribution Systems ◽  
Comfort Level ◽  
Cfd Modeling ◽  
Air Distribution ◽  
Air Velocity ◽  
Comfort Index ◽  
System Mode

The partition air distribution systems evaluated in this study allow occupants to control the system mode (on/off) and the supply air velocity and direction with similar flexibility as occupants in automobiles. To find optimal specifications for the partition air distribution systems that are able to achieve comfortable micro-environment, a CFD modeling tool was used to simulate the airflow and thermal performance of the partition air distribution systems in a typical office space. By analyzing the distribution characteristics of indoor air temperature, air velocity and thermal comfort index, the study assessed the performance of the partition air distribution systems with different operating parameters. The simulation results were analyzed and evaluated to assess both occupant’s thermal comfort and system energy consumption. The study shows that space cooling energy can be reduced while maintaining acceptable indoor thermal comfort level using a partition air distribution system with a higher supply air temperature.

Numerical study of different ceiling-mounted air distribution systems for a virtual classroom environment

2016 ◽  
Vol 26 (10) ◽  
pp. 1382-1396 ◽  
Author(s):  
Eusébio Z. E. Conceição ◽  
Cristina I. M. Santiago ◽  
Hazim B. Awbi
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Air Temperature ◽  
Distribution Systems ◽  
Numerical Study ◽  
Virtual Classroom ◽  
Comfort Level ◽  
Air Distribution ◽  
Air Supply ◽  
Distribution Index

This paper presents a comparative numerical study of different ceiling-mounted-localized air distribution systems placed above students in a virtual classroom in summer conditions. The influence of four different ceiling-mounted-localized air distribution systems, using vertical descendent jets, on the thermal comfort, local thermal discomfort, and air quality levels was numerically evaluated. The air distribution index, developed previously, was used for non-uniform environment. This index considers the thermal comfort level, air quality level, effectiveness for heat removal, and effectiveness for contaminant removal. Numerical simulations were conducted for a virtual classroom equipped with one of four different ceiling-mounted-localized air distribution systems and with 6 desks, 6 or 12 students, and 2 upper airflow outlets. Inlet air supply temperature of 20 and 24℃ and an outdoor air temperature of 28℃ were used. The simulation results show that the air supply system having a vertical air jet placed at 1.8 m above the floor level (Case III), and with an inlet area of 0.01 m2 and a supply air velocity of 3 m/s would represent the best option in comparison with other air supply methods. In general, the air distribution index value decreases with an increase in inlet air temperature and the number of occupants. The air distribution index values are highest for Case III representing a classroom with 6 or 12 occupants with an inlet air temperature of 20 or 24℃.

scholarly journals A Sustainability-Oriented Multiobjective Optimization Model for Siting and Sizing Distributed Generation Plants in Distribution Systems

2013 ◽  
Vol 2013 ◽  
pp. 1-11
Author(s):  
Guang Chen ◽  
Bin Chen ◽  
Pan Dai ◽  
Hao Zhou
Keyword(s):  
Multiobjective Optimization ◽  
Environmental Sustainability ◽  
Optimization Model ◽  
Distribution System ◽  
Distribution Systems ◽  
Numerical Study ◽  
Economic Cost ◽  
Simulation Method ◽  
Chance Constraints ◽  
Load Flow

This paper proposes a sustainability-oriented multiobjective optimization model for siting and sizing DG plants in distribution systems. Life cycle exergy (LCE) is used as a unified indicator of the entire system’s environmental sustainability, and it is optimized as an objective function in the model. Other two objective functions include economic cost and expected power loss. Chance constraints are used to control the operation risks caused by the uncertain power loads and renewable energies. A semilinearized simulation method is proposed and combined with the Latin hypercube sampling (LHS) method to improve the efficiency of probabilistic load flow (PLF) analysis which is repeatedly performed to verify the chance constraints. A numerical study based on the modified IEEE 33-node system is performed to verify the proposed method. Numerical results show that the proposed semilinearized simulation method reduces about 93.3% of the calculation time of PLF analysis and guarantees satisfying accuracy. The results also indicate that benefits for environmental sustainability of using DG plants can be effectively reflected by the proposed model which helps the planner to make rational decision towards sustainable development of the distribution system.

Assessment of thermal comfort in high-occupancy spaces with relevance to air distribution schemes: A case study of mosques

2018 ◽  
Vol 39 (5) ◽  
pp. 572-589 ◽  
Author(s):  
S Samiuddin ◽  
Ismail M Budaiwi
Keyword(s):  
Thermal Comfort ◽  
Performance Index ◽  
Distribution System ◽  
Thermal Environment ◽  
Terminal Velocity ◽  
Air Distribution ◽  
Human Thermal Comfort ◽  
Index Value ◽  
Air Diffusion

In high-occupancy intermittently operated buildings such as mosques and auditoriums, maintaining an acceptable thermal environment may present a challenging task. Variations in the operation and the thermal loads can result in variable and non-uniform thermal comfort conditions when the HVAC system is not properly designed. Non-uniformity of the thermal environment is greatly influenced by the design and scheme of the air distribution system. Mosques, with their distinctive five intermittent short occupancies and the non-fixed posture of occupants, present a unique case for investigation. In this study, the effect of air distribution of various schemes of a ceiling-based system on the thermal comfort in mosques is investigated. Air diffusion performance index and Fanger’s PMV method are used to assess thermal comfort. Three air distribution schemes at four diffuser terminal velocities were studied using the EnergyPlus and computational fluid dynamics techniques. Results indicate major variations in air diffusion performance index with each air distribution scheme type and diffuser terminal velocity. The uniformity of the PMV was entirely dependent on the air diffusion performance index value and exhibited large variations when the air diffusion performance index value was low. In most cases, the space was overcooled with an average PMV of −0.66 or below. Practical application: The effect of air distribution system design on human thermal comfort has been very complex to understand, as it involves different schemes and different diffuser discharge velocities. This study will help engineers and designers in designing better thermal environment for the occupants.

Sign in / Sign up

Export Citation Format

Share Document