Communication—Iron(II)-Benzene Phosphonate Coordination Polymers as an Efficient Active Material for Negative Electrode of Lithium-Ion Batteries

2017 ◽  
Vol 164 (12) ◽  
pp. A2552-A2554 ◽  
Author(s):  
Marine Cognet ◽  
Thibaut Gutel ◽  
David Peralta ◽  
Jerôme Maynadié ◽  
Michaël Carboni ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Coordination Polymers ◽  
Active Material ◽  
Negative Electrode ◽  
Lithium Ion

Electrochemical Properties of Carbon-Coated NbO2 as a Negative Electrode for Lithium-Ion Batteries

2016 ◽  
Vol 724 ◽  
pp. 87-91 ◽  
Author(s):  
Chang Su Kim ◽  
Yong Hoon Cho ◽  
Kyoung Soo Park ◽  
Soon Ki Jeong ◽  
Yang Soo Kim
Keyword(s):  
Electrochemical Properties ◽  
Lithium Ion Batteries ◽  
Ball Milling ◽  
Carbon Coating ◽  
Electrochemical Impedance ◽  
Active Material ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Transfer Resistance ◽  
Carbon Coated

We investigated the electrochemical properties of carbon-coated niobium dioxide (NbO2) as a negative electrode material for lithium-ion batteries. Carbon-coated NbO2 powders were synthesized by ball-milling using carbon nanotubes as the carbon source. The carbon-coated NbO2 samples were of smaller particle size compared to the pristine NbO2 samples. The carbon layers were coated non-uniformly on the NbO2 surface. The X-ray diffraction patterns confirmed that the inter-layer distances increased after carbon coating by ball-milling. This lead to decreased charge-transfer resistance, confirmed by electrochemical impedance spectroscopy, allowing electrons and lithium-ions to quickly transfer between the active material and electrolyte. Electrochemical performance, including capacity and initial coulombic efficiency, was therefore improved by carbon coating by ball-milling.

Electrochemical Properties of Chemically Etched-NbO2 as a Negative Electrode Material for Lithium Ion Batteries

2015 ◽  
Vol 1120-1121 ◽  
pp. 115-118 ◽  
Author(s):  
Yong Hoon Cho ◽  
Soon Ki Jeong ◽  
Yang Soo Kim
Keyword(s):  
Electrochemical Properties ◽  
Lithium Ion Batteries ◽  
Electrode Material ◽  
Photoelectron Spectroscopy ◽  
Active Material ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Electrode Performance ◽  
Niobium Dioxide ◽  
Negative Electrode Material

The electrochemical properties niobium dioxide (NbO2) was investigated as a negative electrode material for lithium ion batteries. The NbO2electrode showed a large irreversible capacity and small discharge capacity. The results of X-ray photoelectron spectroscopy indicate that the poor electrode performance of NbO2may be caused by niobium pentoxide (Nb2O5) formed on the surface of active material. The Nb2O5could be removed by chemical etching to some extent, thus improving the electrode performance.

scholarly journals NbO2 as a Noble Zero-Strain Material for Li-Ion Batteries: Electrochemical Redox Behavior in a Nonaqueous Solution

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2960 ◽  
Author(s):  
Yang-Soo Kim ◽  
Yonghoon Cho ◽  
Paul M. Nogales ◽  
Soon-Ki Jeong
Keyword(s):  
Lithium Ion Batteries ◽  
Coulombic Efficiency ◽  
Active Material ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Cycling Performance ◽  
Nonaqueous Solution ◽  
Constant Current ◽  
Lithium Ions ◽  
Rutile Structure

Lithium-ion batteries are widely available commercially and attempts to extend the lifetime of these batteries remain necessary. The energy storage characteristics of NbO2 with a rutile structure as a material for the negative electrode of lithium-ion batteries were investigated. When negative potential was applied to the NbO2 electrode during application of a constant current in a nonaqueous solution containing lithium ions, these ions were inserted into the NbO2. Conversely, upon application of positive potential, the inserted lithium ions were extracted from the NbO2. In situ X-ray diffraction results revealed that the variation in the volume of NbO2 accompanying the insertion and extraction of lithium was 0.14%, suggesting that NbO2 is a zero-strain (usually defined by a volume change ratio of 1% or less) active material for lithium-ion batteries. Moreover, the highly stable structure of NbO2 allows the corresponding electrode to exhibit excellent cycling performance and coulombic efficiency.

scholarly journals Electrochemical study on nickel aluminum layered double hydroxides as high-performance electrode material for lithium-ion batteries based on sodium alginate binder

2021 ◽  
Author(s):  
Xinyue Li ◽  
Marco Fortunato ◽  
Anna Maria Cardinale ◽  
Angelina Sarapulova ◽  
Christian Njel ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Electrode Material ◽  
Photoelectron Spectroscopy ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Electrochemical Study ◽  
Ex Situ ◽  
Potential Range ◽  
X Ray ◽  
Storage Mechanism

AbstractNickel aluminum layered double hydroxide (NiAl LDH) with nitrate in its interlayer is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li+/Li) and of the binder on the performance of the material is investigated in 1 M LiPF6 in EC/DMC vs. Li. The NiAl LDH electrode based on sodium alginate (SA) binder shows a high initial discharge specific capacity of 2586 mAh g−1 at 0.05 A g−1 and good stability in the potential range of 0.01–3.0 V vs. Li+/Li, which is better than what obtained with a polyvinylidene difluoride (PVDF)-based electrode. The NiAl LDH electrode with SA binder shows, after 400 cycles at 0.5 A g−1, a cycling retention of 42.2% with a capacity of 697 mAh g−1 and at a high current density of 1.0 A g−1 shows a retention of 27.6% with a capacity of 388 mAh g−1 over 1400 cycles. In the same conditions, the PVDF-based electrode retains only 15.6% with a capacity of 182 mAh g−1 and 8.5% with a capacity of 121 mAh g−1, respectively. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li+ insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. Graphical abstract The as-prepared NiAl-NO3−-LDH with the rhombohedral R-3 m space group is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li+/Li) and of the binder on the material’s performance is investigated in 1 M LiPF6 in EC/DMC vs. Li. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li+ insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. This work highlights the possibility of the direct application of NiAl LDH materials as negative electrodes for LIBs.

Negative Electrode Comprised of Nanostructured CuO for Advanced Lithium Ion Batteries

2017 ◽  
Vol 28 (3) ◽  
pp. 1595-1604 ◽  
Author(s):  
Manab Kundu ◽  
Gopalu Karunakaran ◽  
Evgeny Kolesnikov ◽  
Mikhail V. Gorshenkov ◽  
Denis Kuznetsov
Keyword(s):  
Lithium Ion Batteries ◽  
Negative Electrode ◽  
Lithium Ion

Recent progress in rechargeable lithium batteries with organic materials as promising electrodes

2016 ◽  
Vol 4 (19) ◽  
pp. 7091-7106 ◽  
Author(s):  
Jian Xie ◽  
Qichun Zhang
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Batteries ◽  
Recent Progress ◽  
Electrode Materials ◽  
Negative Electrode ◽  
Lithium Ion ◽  
Positive Electrode ◽  
Rechargeable Lithium Batteries ◽  
Organic Electrode ◽  
Negative Electrode Materials

Different organic electrode materials in lithium-ion batteries are divided into three types: positive electrode materials, negative electrode materials, and bi-functional electrode materials, and are further discussed.

Research Progress and Application of Modified Silicon-Based Anode Materials for Lithium-Ion Batteries

2021 ◽  
Vol 1036 ◽  
pp. 35-44
Author(s):  
Ling Fang Ruan ◽  
Jia Wei Wang ◽  
Shao Ming Ying
Keyword(s):  
Electrochemical Performance ◽  
Lithium Ion Batteries ◽  
Volume Expansion ◽  
Anode Materials ◽  
Active Material ◽  
Three Dimensional ◽  
Lithium Ion ◽  
Research Progress ◽  
Ion Intercalation ◽  
Silicon Based

Silicon-based anode materials have been widely discussed by researchers because of its high theoretical capacity, abundant resources and low working voltage platform,which has been considered to be the most promising anode materials for lithium-ion batteries. However,there are some problems existing in the silicon-based anode materials greatly limit its wide application: during the process of charge/discharge, the materials are prone to about 300% volume expansion, which will resultin huge stress-strain and crushing or collapse on the anods; in the process of lithium removal, there is some reaction between active material and current collector, which creat an increase in the thickness of the solid phase electrolytic layer(SEI film); during charging and discharging, with the increase of cycle times, cracks will appear on the surface of silicon-based anode materials, which will cause the batteries life to decline. In order to solve these problems, firstly, we summarize the design of porous structure of nanometer sized silicon-based materials and focus on the construction of three-dimensional structural silicon-based materials, which using natural biomass, nanoporous carbon and metal organic framework as structural template. The three-dimensional structure not only increases the channel of lithium-ion intercalation and the rate of ion intercalation, but also makes the structure more stable than one-dimensional or two-dimensional. Secondly, the Si/C composite, SiOx composite and alloying treatment can improve the volume expansion effection, increase the rate of lithium-ion deblocking and optimize the electrochemical performance of the material. The composite materials are usually coated with elastic conductive materials on the surface to reduce the stress, increase the conductivity and improve the electrochemical performance. Finally, the future research direction of silicon-based anode materials is prospected.

scholarly journals A Sustainable Process for the Recovery of Valuable Metals from Spent Lithium Ion Batteries by Deep Eutectic Solvents Leaching

2022 ◽  
Vol 5 (1) ◽  
pp. 100
Author(s):  
Lourdes Yurramendi ◽  
Jokin Hidalgo ◽  
Amal Siriwardana
Keyword(s):  
Lithium Ion Batteries ◽  
Choline Chloride ◽  
Active Material ◽  
Lithium Ion ◽  
Deep Eutectic Solvents ◽  
Extraction Yield ◽  
Operating Conditions ◽  
Inorganic Acids ◽  
Additive Type ◽  
Valuable Metals

The feasibility of using low-environmental-impact leaching media to recover valuable metals from lithium ion batteries (LIBs) has been evaluated. Several deep eutectic solvents (DES) were tested as leaching agents in the presence of different type of additives (i.e., H2O2). The optimization of Co recovery was carried out by investigating various operating conditions, such as reaction time, temperature, solid (black mass) to liquid (DES) ratio, additive type, and concentration. Leaching with final selected DES choline chloride (33%), lactic acid (53%), and citric acid (13%) at 55 °C achieved an extraction yield of more than 95% for the cobalt. The leaching mechanism likely begins with the dissolution of the active material in the black mass (BM) followed by chelation of Co(II) with the DES. The results obtained confirm that those leaching media are an eco-friendly alternative to the strong inorganic acids used nowadays.

Sign in / Sign up

Export Citation Format

Share Document