Challenges of Thin Layers for SOFC Devices: From Low-Cost Chemical Bath Deposition (CBD) to Atomic Layer Deposition (ALD)

2019 ◽  
Vol 35 (1) ◽  
pp. 601-608 ◽  
Author(s):  
Bianca Medina-Lott ◽  
Marine Tassé ◽  
C. Brahim ◽  
Armelle Ringuedé ◽  
Lauri Niinistö ◽  
...  

2014 ◽  
Vol 1 (3) ◽  
pp. 314-320 ◽  
Author(s):  
David Muñoz-Rojas ◽  
Judith MacManus-Driscoll

Fast air printing of functional oxide films: spatial atomic layer deposition, a new technique with a high potential in the field of low cost photovoltaics.


2019 ◽  
Vol 3 (15) ◽  
pp. 279-282 ◽  
Author(s):  
Byung Soo So ◽  
Wontae Cho ◽  
Yil-Hwan You ◽  
Jin-Ha Hwang ◽  
Sun Sook Lee ◽  
...  

Author(s):  
Shane O'Donnell ◽  
Feljin Jose ◽  
Kyle Shiel ◽  
Matthew Snelgrove ◽  
Caitlin McFeely ◽  
...  

Abstract Due to its low cost and suitable band gap, silicon has been studied as a photoanode material for some time. However, as a result of poor stability during the oxygen evolution reaction (OER), Si still remains unsuitable for any extended use. Ultra-thin titanium dioxide (TiO2) films have been used as protective coatings and are shown to enhance Si photoanode lifetime with added solar to hydrogen (STH) performance improvements through distancing the oxidation reaction away from the Si photoanode surface and improved charge transport through the anode. This study details the nucleation, growth chemistry, and performance of TiO2 thin films prepared via thermal and plasma enhanced atomic layer deposition (ALD) using both titanium isopropoxide (TTIP) and Tetrakis(dimethylamido)titanium (TDMAT) as the precursor material. The effect of post ALD treatments of plasma and air annealing was also studied. Films were investigated using photoelectrochemical cell testing to evaluate photoelectrochemical performance, and in-vacuum cycle-by-cycle x-ray photoelectron spectroscopy (XPS) was used as the primary characterisation technique to study nucleation mechanisms and film properties contributing to improvements in cell performance. TiO2 grown by plasma enhanced ALD results in cleaner films with reduced carbon incorporation. However, despite increased carbon incorporation, thermally grown films showed improved photocurrent as a result of oxygen vacancies in these films. Post deposition annealing in a H2 ambient is shown to further improve photocurrent in all cases, while annealing in atmosphere leads to uniform film chemistry and enhanced photocurrent stability in all cases.


2004 ◽  
Vol 449-452 ◽  
pp. 1165-1168 ◽  
Author(s):  
D.K. Jeong ◽  
N.H. Park ◽  
S.-H. Jung ◽  
Woo Gwang Jung ◽  
H. Shin ◽  
...  

Novel fabrication routes of oxide/semiconducting hybrid nanotubes or coaxial nanocables with 30~200 nanometers of radius and ~10 micrometers of length using atomic layer deposition (ALD) and soluble nano-templates was reported. In order to fabricate the hybrid nanotubes using nanotemplates, which were treated with surface modification using SAMs in order to achieve selective deposition only onto inner wall of the template. Deposition of metal oxide layers (TiO2, ZrO2) conformally and uniformly onto the wall of templates using ALD. To fabricate metal oxide/CdS nanocables or coaxial nanotubes, CdS was deposited onto metal oxide nanotubes by chemical bath deposition. Coaxial nanocables was also 30-200 nm in diameter and 1-10 in lengths.


Sign in / Sign up

Export Citation Format

Share Document