Interactions Between Posture and Locomotion: Motor Patterns in Humans Walking With Bent Posture Versus Erect Posture

2000 ◽  
Vol 83 (1) ◽  
pp. 288-300 ◽  
Author(s):  
R. Grasso ◽  
M. Zago ◽  
F. Lacquaniti

Human erect locomotion is unique among living primates. Evolution selected specific biomechanical features that make human locomotion mechanically efficient. These features are matched by the motor patterns generated in the CNS. What happens when humans walk with bent postures? Are normal motor patterns of erect locomotion maintained or completely reorganized? Five healthy volunteers walked straight and forward at different speeds in three different postures (regular, knee-flexed, and knee- and trunk-flexed) while their motion, ground reaction forces, and electromyographic (EMG) activity were recorded. The three postures imply large differences in the position of the center of body mass relative to the body segments. The elevation angles of the trunk, pelvis, and lower limb segments relative to the vertical in the sagittal plane, the ground reaction forces and the rectified EMGs were analyzed over the gait cycle. The waveforms of the elevation angles along the gait cycle remained essentially unchanged irrespective of the adopted postures. The first two harmonics of these kinematic waveforms explain >95% of their variance. The phase shift but not the amplitude ratio between the first harmonic of the elevation angle waveforms of adjacent pairs was affected systematically by changes in posture. Thigh, shank, and foot angles covaried close to a plane in all conditions, but the plane orientation was systematically different in bent versus erect locomotion. This was explained by the changes in the temporal coupling among the three segments. For walking speeds >1 m s−1, the plane orientation of bent locomotion indicates a much lower mechanical efficiency relative to erect locomotion. Ground reaction forces differed prominently in bent versus erect posture displaying characteristics intermediate between those typical of walking and those of running. Mean EMG activity was greater in bent postures for all recorded muscles independent of the functional role. The waveforms of the muscle activities and muscle synergies also were affected by the adopted posture. We conclude that maintaining bent postures does not interfere either with the generation of segmental kinematic waveforms or with the planar constraint of intersegmental covariation. These characteristics are maintained at the expense of adjustments in kinetic parameters, muscle synergies and the temporal coupling among the oscillating body segments. We argue that an integrated control of gait and posture is made possible because these two motor functions share some common principles of spatial organization.

1998 ◽  
Vol 80 (4) ◽  
pp. 1868-1885 ◽  
Author(s):  
R. Grasso ◽  
L. Bianchi ◽  
F. Lacquaniti

Grasso, R., L. Bianchi, and F. Lacquaniti. Motor patterns for human gait: backward versus forward locomotion. J. Neurophysiol. 80: 1868–1885, 1998. Seven healthy subjects walked forward (FW) and backward (BW) at different freely chosen speeds, while their motion, ground reaction forces, and electromyographic (EMG) activity from lower limb muscles were recorded. We considered the time course of the elevation angles of the thigh, shank, and foot segments in the sagittal plane, the anatomic angles of the hip, knee, and ankle joints, the vertical and longitudinal ground reaction forces, and the rectified EMGs. The elevation angles were the most reproducible variables across trials in each walking direction. After normalizing the time course of each variable over the gait cycle duration, the waveforms of all elevation angles in BW gait were essentially time reversed relative to the corresponding waveforms in FW gait. Moreover, the changes of the thigh, shank, and foot elevation covaried along a plane during the whole gait cycle in both FW and BW directions. Cross-correlation analysis revealed that the phase coupling among these elevation angles is maintained with a simple reversal of the delay on the reversal of walking direction. The extent of FW–BW correspondence also was good for the hip angle, but it was smaller for the knee and ankle angles and for the ground reaction forces. The EMG patterns were drastically different in the two movement directions as was the organization of the muscular synergies measured by cross-correlation analysis. Moreover, at any given speed, the mean EMG activity over the gait cycle was generally higher in BW than in FW gait, suggesting a greater level of energy expenditure in the former task. We argue that conservation of kinematic templates across gait reversal at the expense of a complete reorganization of muscle synergies does not arise from biomechanical constraints but may reflect a behavioral goal achieved by the central networks involved in the control of locomotion.


2001 ◽  
Vol 204 (11) ◽  
pp. 1979-1989 ◽  
Author(s):  
Wallace O. Bennett ◽  
Rachel S. Simons ◽  
Elizabeth L. Brainerd

SUMMARY The function of the lateral hypaxial muscles during locomotion in tetrapods is controversial. Currently, there are two hypotheses of lateral hypaxial muscle function. The first, supported by electromyographic (EMG) data from a lizard (Iguana iguana) and a salamander (Dicamptodon ensatus), suggests that hypaxial muscles function to bend the body during swimming and to resist long-axis torsion during walking. The second, supported by EMG data from lizards during relatively high-speed locomotion, suggests that these muscles function primarily to bend the body during locomotion, not to resist torsional forces. To determine whether the results from D. ensatus hold for another salamander, we recorded lateral hypaxial muscle EMGs synchronized with body and limb kinematics in the tiger salamander Ambystoma tigrinum. In agreement with results from aquatic locomotion in D. ensatus, all four layers of lateral hypaxial musculature were found to show synchronous EMG activity during swimming in A. tigrinum. Our findings for terrestrial locomotion also agree with previous results from D. ensatus and support the torsion resistance hypothesis for terrestrial locomotion. We observed asynchronous EMG bursts of relatively high intensity in the lateral and medial pairs of hypaxial muscles during walking in tiger salamanders (we call these ‘α-bursts’). We infer from this pattern that the more lateral two layers of oblique hypaxial musculature, Mm. obliquus externus superficialis (OES) and obliquus externus profundus (OEP), are active on the side towards which the trunk is bending, while the more medial two layers, Mm. obliquus internus (OI) and transversus abdominis (TA), are active on the opposite side. This result is consistent with the hypothesis proposed for D. ensatus that the OES and OEP generate torsional moments to counteract ground reaction forces generated by forelimb support, while the OI and TA generate torsional moments to counteract ground reaction forces from hindlimb support. However, unlike the EMG pattern reported for D. ensatus, a second, lower-intensity burst of EMG activity (‘β-burst’) was sometimes recorded from the lateral hypaxial muscles in A. tigrinum. As seen in other muscle systems, these β-bursts of hypaxial muscle coactivation may function to provide fine motor control during locomotion. The presence of asynchronous, relatively high-intensity α-bursts indicates that the lateral hypaxial muscles generate torsional moments during terrestrial locomotion, but it is possible that the balance of forces from both α- and β-bursts may allow the lateral hypaxial muscles to contribute to lateral bending of the body as well.


2011 ◽  
Vol 133 (5) ◽  
Author(s):  
Lyle T. Jackson ◽  
Patrick M. Aubin ◽  
Matthew S. Cowley ◽  
Bruce J. Sangeorzan ◽  
William R. Ledoux

The symptomatic flatfoot deformity (pes planus with peri-talar subluxation) can be a debilitating condition. Cadaveric flatfoot models have been employed to study the etiology of the deformity, as well as invasive and noninvasive surgical treatment strategies, by evaluating bone positions. Prior cadaveric flatfoot simulators, however, have not leveraged industrial robotic technologies, which provide several advantages as compared with the previously developed custom fabricated devices. Utilizing a robotic device allows the researcher to experimentally evaluate the flatfoot model at many static instants in the gait cycle, compared with most studies, which model only one to a maximum of three instances. Furthermore, the cadaveric tibia can be statically positioned with more degrees of freedom and with a greater accuracy, and then a custom device typically allows. We created a six degree of freedom robotic cadaveric simulator and used it with a flatfoot model to quantify static bone positions at ten discrete instants over the stance phase of gait. In vivo tibial gait kinematics and ground reaction forces were averaged from ten flatfoot subjects. A fresh frozen cadaveric lower limb was dissected and mounted in the robotic gait simulator (RGS). Biomechanically realistic extrinsic tendon forces, tibial kinematics, and vertical ground reaction forces were applied to the limb. In vitro bone angular position of the tibia, calcaneus, talus, navicular, medial cuneiform, and first metatarsal were recorded between 0% and 90% of stance phase at discrete 10% increments using a retroreflective six-camera motion analysis system. The foot was conditioned flat through ligament attenuation and axial cyclic loading. Post-flat testing was repeated to study the pes planus deformity. Comparison was then made between the pre-flat and post-flat conditions. The RGS was able to recreate ten gait positions of the in vivo pes planus subjects in static increments. The in vitro vertical ground reaction force was within ±1 standard deviation (SD) of the in vivo data. The in vitro sagittal, coronal, and transverse plane tibial kinematics were almost entirely within ±1 SD of the in vivo data. The model showed changes consistent with the flexible flatfoot pathology including the collapse of the medial arch and abduction of the forefoot, despite unexpected hindfoot inversion. Unlike previous static flatfoot models that use simplified tibial degrees of freedom to characterize only the midpoint of the stance phase or at most three gait positions, our simulator represented the stance phase of gait with ten discrete positions and with six tibial degrees of freedom. This system has the potential to replicate foot function to permit both noninvasive and surgical treatment evaluations throughout the stance phase of gait, perhaps eliciting unknown advantages or disadvantages of these treatments at other points in the gait cycle.


2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Amitava Halder ◽  
Chuansi Gao ◽  
Michael Miller

The effects of cooling on neuromuscular function and performance during gait are not fully examined. The purpose of this study was to investigate the effects of local cooling for 20 min in cold water at 10°C in a climate chamber also at 10°C on maximal isometric force and electromyographic (EMG) activity of the lower leg muscles. Gait ground reaction forces (GRFs) were also assessed. Sixteen healthy university students participated in the within subject design experimental study. Isometric forces of the tibialis anterior (TA) and the gastrocnemius medialis (GM) were measured using a handheld dynamometer and the EMG was recorded using surface electrodes. Ground reaction forces during gait and the required coefficient of friction (RCOF) were recorded using a force plate. There was a significantly reduced isometric maximum force in the TA muscle (P<0.001) after cooling. The mean EMG amplitude of GM muscle was increased after cooling (P<0.003), indicating that fatigue was induced. We found no significant changes in the gait GRFs and RCOF on dry and level surface. These findings may indicate that local moderate cooling 20 min of 10°C cold water, may influence maximal muscle performance without affecting activities at sub-maximal effort.


2003 ◽  
Vol 90 (6) ◽  
pp. 3625-3639 ◽  
Author(s):  
L.J.G. Bouyer ◽  
S. Rossignol

The goal of this study was to evaluate the role of hindpaw cutaneous feedback in the control of locomotion, by cutting some (in one cat) or all (in 2 cats) cutaneous nerves bilaterally at ankle level. Kinematic and electromyographic (EMG) recordings were obtained before and for several weeks after denervation during level and incline (15° up and down) treadmill walking. Ladder walking and ground reaction forces were also documented sporadically. Early after the denervation (1–3 days), cats could not walk across a ladder, although deficits were small during level treadmill walking. Increased knee flexion velocity caused a 14% reduction in swing phase duration. EMG activity was consistently increased in knee, ankle, and toe flexors, and in at least one knee or ankle extensor. The adaptive changes during walking on the incline were much reduced after denervation. Ladder walking gradually recovered within 3–7 wk. By this time, level treadmill walking kinematics had completely returned to normal, but EMG activity in flexors remained above control. Incline walking improved but did not return to normal. Mediolateral ground reaction forces during overground walking were increased by 200%. It is concluded that in intact cats, cutaneous inputs contribute more to demanding situations such as walking on a ladder or on inclines than to level walking. Active adaptive mechanisms are likely involved given that the EMG locomotor pattern never returned to control level. The companion paper shows on the other hand that when the same cats are spinalized, these cutaneous inputs become critical for foot placement during locomotion.


Author(s):  
David E. Amiot ◽  
Rachel M. Schmidt ◽  
Angwei Law ◽  
Erich P. Meinig ◽  
Lynn Yu ◽  
...  

Historically, users of prosthetic ankles have relied on actively operated systems to provide effective slope adaptability. However, there are many drawbacks to these systems. This research builds upon work previously completed by Hansen et al. as it develops a passive, hydraulically operated prosthetic ankle with the capability of adapting to varying terrain in every step. Using gait cycle data and an analysis of ground reaction forces, the team determined that weight activation was the most effective way to activate the hydraulic circuit. Evaluations of the system pressure and energy showed that although the spring damper system results in a loss of 9J of energy to the user, the footplate stores 34J more than a standard prosthesis. Therefore, the hydraulic prosthetic provides a 54% increase in stored energy when compared to a standard prosthesis. The hydraulic circuit manifold prototype was manufactured and tested. Through proof of concept testing, the prototype proved to be slope adaptable by successfully achieving a plantarflexion angle of 16 degrees greater than a standard prosthetic foot currently available on the market.


Sign in / Sign up

Export Citation Format

Share Document