scholarly journals A Stability Indicating RP-HPLC Method for the Estimation of Gemcitabine HCl in Injectable Dosage forms

2010 ◽  
Vol 7 (s1) ◽  
pp. S239-S244 ◽  
Author(s):  
Shaik Mastanamma ◽  
G. Ramkumar ◽  
D. Anantha Kumar ◽  
J. V. L. N. Seshagiri Rao
Keyword(s):  
Dosage Forms ◽  
Hplc Method ◽  
Forced Degradation ◽  
Stability Indicating ◽  
Gemcitabine Hydrochloride ◽  
Rp Hplc ◽  
Forced Degradation Studies ◽  
The Stability ◽  
Injectable Dosage

A stability indicating RP HPLC method has been developed for the determination of gemcitabine hydrochloride. Chromatography was carried out on an ODS C18column (250×4.6 mm; 5μ) using a mixture of methanol and phosphate buffer (40: 60 v/v ) as the mobile phase at a flow rate of 1.0 mL/min. The detection of the drug was monitored at 270 nm. The retention time of the drug was found to be 2.31 min. The method produced linear responses in the concentration range of 10 to 60 μg/mL of gemcitabine HCl. The method was found to be reproducible for analysis of the drug in injectable dosage forms. The stability of the drug was assessed by forced degradation studies.

scholarly journals Validation of a Stability-Indicating RP-HPLC Method for the Determination of Entecavir in Tablet Dosage Form

2010 ◽  
Vol 93 (2) ◽  
pp. 523-530 ◽  
Author(s):  
Sérgio Luiz Dalmora ◽  
Maximiliano da Silva Sangoi ◽  
Daniele Rubert Nogueira ◽  
Lucélia Magalhães da Silva
Keyword(s):  
Dosage Form ◽  
Potassium Phosphate ◽  
Hplc Method ◽  
Forced Degradation ◽  
Photodiode Array Detection ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Forced Degradation Studies ◽  
Tablet Dosage

Abstract An RP-HPLC method was validated for the determination of entecavir in tablet dosage form. The HPLC method was carried out on a Gemini C18 column (150 4.6 mm id) maintained at 30C. The mobile phase consisted of acetonitrilewater (95 + 5, v/v)/potassium phosphate buffer (0.01 M, pH 4; 9 + 91, v/v) pumped at a flow rate of 1.0 mL/min. Photodiode array detection was at 253 nm. The chromatographic separation was obtained with a retention time of 4.18 min, and the method was linear in the range of 0.5200 g/mL (r2 0.9998). The specificity and stability-indicating capability of the method was proven through forced degradation studies, which also showed that there was no interference of the excipients and an increase of the cytotoxicity only by the basic condition. The accuracy was 101.19, with bias lower than 1.81. The LOD and LOQ were 0.39 and 0.5 g/mL, respectively. Method validation demonstrated acceptable results for precision and robustness. The proposed method was applied for the analysis of tablet formulations, to improve QC and assure therapeutic efficacy.

scholarly journals Validation of a Stability-Indicating RP-HPLC Method for Determination of L-Carnitine in Tablets

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Roghaieh Khoshkam ◽  
Minoo Afshar
Keyword(s):  
Hplc Method ◽  
Stability Factor ◽  
Forced Degradation ◽  
Validation Data ◽  
Column Temperature ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Relative Standard ◽  
Forced Degradation Studies

A rapid and stability-indicating RP-HPLC method was developed for determination of l-carnitine in tablets. The separation was based on a C18 analytical column using a mobile phase which consisted of 0.05 M phosphate buffer (pH = 3): ethanol (99 : 1), including 0.56 mg/mL of sodium 1-heptanesulfonate. Column temperature was set at 50°C and quantitation was achieved by UV detection at 225 nm. In forced degradation studies, the drug was subjected to oxidation, hydrolysis, photolysis, and heat. Among the different stress conditions, the exposure to acidic and basic conditions was found to be an important adverse stability factor. The method was validated for specificity, selectivity, linearity, precision, accuracy, and robustness. The applied procedure was found to be linear in l-carnitine concentration range of 84.74–3389.50 µg/mL (r2=0.9997). Precision was evaluated by replicate analysis in which relative standard deviation (RSD) values for areas were found below 2.0%. The recoveries obtained (100.83%–101.54%) ensured the accuracy of the developed method. The expanded uncertainty (3.14%) of the method was also estimated from method validation data. Accordingly, the proposed validated and rapid procedure was proved to be suitable for routine analyzing and stability studies of l-carnitine in tablets.

scholarly journals Stability-indicating HPLC-DAD method for the determination of empagliflozin

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Shilpi Pathak ◽  
Pradeep Mishra
Keyword(s):  
Hplc Method ◽  
Coefficient Of Determination ◽  
Forced Degradation ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Validation Parameters ◽  
Forced Degradation Studies ◽  
Tablet Dosage

Abstract Background A stability-indicating RP-HPLC method was developed and validated for the estimation of empagliflozin drug and its tablet dosage form using a DAD detector. The mobile phase consisted of methanol/acetonitrile/0.1%OPA (75:20:5). The peak was observed at 2.54 min using 222.0 nm absorption maxima. Results Calibration curve plot was found within the range of 10–50 µg/mL. The coefficient of determination (R2) was found to be 0.9990. Forced degradation studies were performed for the empagliflozin in various conditions, and the results were calculated as %RSD values and were found to be within the limits. Conclusion The method was validated as per ICH guidelines with respect to all validation parameters.

scholarly journals A Stability-Indicating RP-HPLC-UV Method for Determination and Chemical Hydrolysis Study of a Novel Naproxen Prodrug

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Mohamed H. M. Hamid ◽  
Tilal Elsaman
Keyword(s):  
Oral Delivery ◽  
Hplc Method ◽  
Forced Degradation ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Chemical Hydrolysis ◽  
Ich Guidelines ◽  
Forced Degradation Studies ◽  
The Stability ◽  
Average Retention Time

A new naproxen amide prodrug was synthesized and spectrally characterized and a simple, precise, and accurate stability-indicating RP-HPLC method was developed and validated for determination and chemical hydrolysis study of the prodrug. Forced degradation studies were conducted as per the International Conference on Harmonization (ICH) guidelines to establish the stability-indicating power of the method. Separations were performed on a C18 column (150 × 4.6 mm i.d., 5 μm p.s.). The mobile phase consisted of acetonitrile and phosphate buffer pH 4.0 in the ratio 60 : 40. The flow rate and injection volume were 1.0 mL/min and 15 μL, respectively. The peaks were monitored at 272 nm. The average retention time is 5.136 min. The linearity of the method was investigated in the range of 10–50 μg/mL and r2 was found to be larger than 0.9987. The LOD and LOQ were found to be 1.853 and 5.615 μg/mL, respectively. Results indicated that the degradants are well resolved and separated from the prodrug. Hydrolysis kinetics studies were carried out in buffer solutions (pH 1.2, 5.5 and 7.4) to establish the fate of the prodrug. The half-lives in the respective buffers were 23.5, 262, and 334 hours indicating sufficient stability to attain the goal of oral delivery.

scholarly journals A new stability-indicating RP-HPLC method for the determination of dicyclomine hydrochloride and dimethicone combination in tablet dosage forms

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
J. Saroja ◽  
Anantha Lakshmi P.V. ◽  
Y. Rammohan ◽  
D. Divya Reddy
Keyword(s):  
Liquid Chromatography ◽  
Dosage Forms ◽  
Flow Speed ◽  
Hplc Method ◽  
Stability Indicating ◽  
Simultaneous Quantification ◽  
Rp Hplc ◽  
Tablet Formulations ◽  
Tablet Dosage

Abstract Background We describe a “stability-indicating liquid chromatography” technique for the estimation of dimethicone (DEC) and dicyclomine hydrochloride (DEH) in the established tablet formulations. Individual quantification of DEH and DEC was reported. But simultaneous quantification of DEH and DEC was lacking. DEH and DEC were analysed on an “XTerra C18 column (250 mm × 4.6 mm, 5 μm)” with the mobile phase solvent run isocratically with 0.1M K2HPO4-acetonitrile (55:45, v/v) on a flow speed of 1.0 mL/min. Results The chromatographic run period for the DEC and DEH assay was 6.0 min with retention times of 2.134 and 2.865 min, respectively. The method was validated for accuracy (99.453 to 100.417% and 99.703 to 100.303% recovery values for DEH and DEC, respectively), precision (RSV value 0.135% for DEC and 0.171% for DEH), linearity (5–15 μg/mL for DEH and 20–60 μg/mL for DEC), selectivity (no hinderance from excipients) and specificity (no hinderance from degradants) recovery. Conclusion The developed stability-indicating liquid chromatography process was well applied to established tablet formulations.

scholarly journals STABILITY INDICATING RP-HPLC ASSAY METHOD FOR ESTIMATION OF DIMETHYL FUMARATE IN BULK AND CAPSULES

2017 ◽  
Vol 9 (5) ◽  
pp. 121 ◽  
Author(s):  
Hemant K. Jain ◽  
Archana A. Gunjal
Keyword(s):  
Dimethyl Fumarate ◽  
Hplc Method ◽  
Assay Method ◽  
Forced Degradation ◽  
Dihydrogen Phosphate ◽  
Column Temperature ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Forced Degradation Studies ◽  
Degradation Studies

Objective: To develop an accurate, simple, precise and specific stability indicating RP-HPLC method for estimation of dimethyl fumarate in bulk and capsules.Methods: An Inertsil ODS (150x4.6 mm, 5µ) column and a mobile phase containing acetonitrile: potassium dihydrogen phosphate buffer pH 6.8 (50:50% v/v) was used for this study. The flow rate was maintained at 1.0 ml/min; column temperature was fixed at 35 °C and UV detection was carried out at 210 nm. The forced degradation studies were performed and method was validated with as per ICH guidelines.Results: The retention time of dimethyl fumarate was found to be 3.3±0.02 min. The value of correlation coefficient between peak area and concentration was found to be 0.9993. The mean percent recovery of dimethyl fumarate in capsules was found in the range of 99.65 to 101.64%. The results of forced degradation studies indicated that the drug was found to be stable in basic, oxidative and thermal conditions while degraded in acidic conditions.Conclusion: It can be conducted from results that the developed HPLC method is simple, accurate, precise and specific. Results of stress testing study revealed that the method is stability indicating. Thus, this method can be used for routine analysis of dimethyl fumarate capsules and check their stability.  

scholarly journals SIMULTANEOUS ESTIMATION, VALIDATION, AND FORCED DEGRADATION STUDIES OF BETAHISTINE DIHYDROCHLORIDE AND DOMPERIDONE IN A PHARMACEUTICAL DOSAGE FORM USING RP-HPLC METHOD

2018 ◽  
Vol 11 (10) ◽  
pp. 125
Author(s):  
Vaishali Mistry ◽  
Rohan Mishra
Keyword(s):  
Hplc Method ◽  
Base Hydrolysis ◽  
Simultaneous Estimation ◽  
Forced Degradation ◽  
Uv Detector ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating ◽  
Rp Hplc ◽  
Betahistine Dihydrochloride ◽  
The Stability

Objective: This study describes the stability-indicating reverse-phase high-performance liquid chromatography (RP-HPLC) method for simultaneous estimation of betahistine dihydrochloride and domperidone in pharmaceutical dosage forms.Methods: The proposed RP-HPLC method was developed using Shimadzu Prominence-i LC-2030 HPLC system equipped with UV detector and chromatographic operation was carried on Shim-pack C18 (250 mm×4.6 mm, 5 μ) column at a flow rate of 1 ml/min and the run time was 10 min. The mobile phase consisted of methanol and water in the ratio of 80:20% v/v and eluents were scanned using a UV detector at 244 nm.Results: The retention time of betahistine dihydrochloride and domperidone was found to be 2.3 and 3.6 min, respectively. A linearity response was observed in the concentration range of 9.6 μg/ml–22.4 μg/ml for betahistine dihydrochloride and 6–14 μg/ml for domperidone, respectively. Limit of detection and limit of quantification for betahistine dihydrochloride were 0.52 μg/ml and 1.58 μg/ml and for domperidone are 0.64 μg/ml and 1.94 μg/ml, respectively.Conclusion: The stability-indicating method was developed by subjecting drugs to stress conditions such as acid and base hydrolysis, oxidation, photo and thermal degradation, and degraded products formed were resolved successfully from samples.

scholarly journals Stability Indicating RP-HPLC Method for Determination of Valsartan in Pure and Pharmaceutical Formulation

2010 ◽  
Vol 7 (1) ◽  
pp. 246-252 ◽  
Author(s):  
S. K. Patro ◽  
S. K. Kanungo ◽  
V. J. Patro ◽  
N. S. K. Choudhury
Keyword(s):  
Linear Response ◽  
Mobile Phase ◽  
Hplc Method ◽  
Forced Degradation ◽  
Control Analysis ◽  
Solution Stability ◽  
Stability Indicating ◽  
Quality Control Analysis ◽  
Rp Hplc

A simple, rapid and accurate and stability indicating RP-HPLC method was developed for the determination of valsartan in pure and tablet forms. The method showed a linear response for concentrations in the range of 50-175 µg/mL using 0.01 M NH4H2PO4(pH 3.5) buffer: methanol [50:50] as the mobile phase with detection at 210 nm and a flow rate of 1 mL/min and retention time 11.041 min. The method was statistically validated for accuracy, precision, linearity, ruggedness, robustness, forced degradation, solution stability and selectivity. Quantitative and recovery studies of the dosage form were also carried out and analyzed; the % RSD from recovery studies was found to be less than 1. Due to simplicity, rapidity and accuracy of the method, we believe that the method will be useful for routine quality control analysis.

scholarly journals DEVELOPMENT AND VALIDATION OF STABILITY INDICATING RP-HPLC METHOD FOR DETERMINATION OF β-ACETYLDIGOXIN

2016 ◽  
Vol 9 (1) ◽  
pp. 54
Author(s):  
Megha Sharma ◽  
Neeraj Mahindroo
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Hplc Method ◽  
Stability Study ◽  
Array Detector ◽  
Forced Degradation ◽  
Simple Method ◽  
Stability Indicating ◽  
Rp Hplc

Objective: The objective of the present study was to develop and validate a novel stability indicating reverse phase-high performance liquid chromatography (RP-HPLC) method for determination of β-acetyldigoxin, an active pharmaceutical ingredient (API).Methods: The chromatographic separation was carried out on Agilent Technologies 1200 series HPLC system equipped with photo diode array detector and C-18 (4.6x250 mm, 5 µ) column. The mobile phase consisted of water: acetonitrile (65:35 v/v), delivered at a flow rate of 1.5 ml/min and eluents were monitored at 225 nm.Results: The retention time of β-acetyldigoxin was 9.2 min. The method was found to be linear (R2= 0.9995) in the range of 31.25-500 µg/ml. The accuracy studies showed the mean percent recovery of 101.02%. LOD and LOQ were observed to be 0.289 µg/ml and 0.965 µg/ml, respectively. The method was found to be robust and system suitability testing was also performed. Forced degradation analysis was carried out under acidic, alkaline, oxidative and photolytic stress conditions. Significant degradation was observed under tested conditions, except for oxidative condition. The method was able to separate all the degradation products within runtime of 20 min and was able to determine β-acetyldigoxin unequivocally in presence of degradation products.Conclusion: The novel, economic, rapid and simple method for analysis of β-acetyldigoxin is reported. The developed method is suitable for routine quality control and its determination as API, and in pharmaceutical formulations and stability study samples.

Sign in / Sign up

Export Citation Format

Share Document