scholarly journals A New Cryogenic Air Separation Process with Flash Separator

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Zeinab A. M. Khalel ◽  
Ali A. Rabah ◽  
Taj Alasfia M. Barakat
Keyword(s):  
Energy Consumption ◽  
Flow Rate ◽  
Air Flow ◽  
Aspen Plus ◽  
Separation Process ◽  
Air Separation ◽  
Air Flow Rate ◽  
Feed Composition ◽  
New Process

A new cryogenic air separation process with flash separator is developed. A flash separator is added to the conventional double-column cryogenic air separation process. The flash separator is used to replace the turbine required to recover a portion of the energy in the double-column air separation process. The flash separator served dual purposes of throttling and separation. Both the conventional and the new processes are simulated using Aspen Plus version 11.1 the model air flow rate and compositions are taken as 50000 Nm3/h of air at standard conditions of 1 atm and 25°C and feed composition of 79.1% N2 and 20.9% O2. The new process decreases the energy consumption and increases the productivity.

scholarly journals Minimization of fan energy consumption in ventilation and (or) air-conditioning systems as an optimization calculus of variations

2019 ◽  
Vol 116 ◽  
pp. 00033
Author(s):  
Michał Karpuk
Keyword(s):  
Energy Consumption ◽  
Calculus Of Variations ◽  
Flow Rate ◽  
Air Conditioning ◽  
Air Flow ◽  
Rate Function ◽  
Hazardous Substances ◽  
Air Flow Rate ◽  
Starting Conditions ◽  
Air Conditioning Systems

The article presents an optimization calculus of variations of fan energy consumption in ventilation and (or) air-conditioning systems. It defines an air flow rate function that depends on the time of operation in the defined room size, starting conditions and the function of hazardous substances emission rate in the room. The differential form of air flow rate dependence on density of hazardous substances allows to establish a connection between air pollution in the room and a fan air flow rate, i.e. fan energy consumption. Creating a fan energy model experiment in the room in different conditions allows to minimize energy consumption to 5–30% depending on existing conditions.

Oxygen transfer and aeration efficiency - influence of diffuser submergence, diffuser density, and blower type

1998 ◽  
Vol 38 (3) ◽  
pp. 1-6 ◽  
Author(s):  
Martin R. Wagner ◽  
H. Johannes Pöpel
Keyword(s):  
Wastewater Treatment ◽  
Energy Consumption ◽  
Flow Rate ◽  
Oxygen Transfer ◽  
Wastewater Treatment Plants ◽  
Air Flow ◽  
Oxygen Absorption ◽  
Air Flow Rate ◽  
Fine Bubble ◽  
Aeration Efficiency

The main factors of fine bubble aeration systems in uniform arrangement in clean water are the air flow rate, the depth of submergence of the diffusers, and the diffuser density. While the influence of the air flow rate on the oxygen transfer parameters is known, knowledge of the influence of the depth of submergence and the diffuser density on the specific oxygen transfer efficiency SOTE [%/m] and on the specific oxygen absorption SOA [g/m3·m at STP] is very limited. Both parameters are of great importance in dimensioning fine bubble aeration systems. Therefore, a literature review was conducted to show the influence of the diffuser submergence and density and the type of blower on oxygen transfer and aeration efficiency. The main review results are, that higher values of specific oxygen absorption can be obtained at higher diffuser density; secondly, the volumetric oxygen transfer rate VOTR [g/m3·h] is higher with increasing depth of submergence at the same air flow rate. Also it can be stated that with greater depth of submergence the specific oxygen absorption [g/m3·m at STP] is reduced. Dependent on the air flow rate and the pressure head, the energy consumption [Wh/m3·m at STP] of the blowers used in wastewater treatment plants is different. For example, the energy consumption varies from 4.3 [Wh/m3·m at STP] (positive displacement blower) to 3.0 [Wh/m3·m at STP] (turbo-compressors) at a pressure of 10 m and an air flow rate of 5,000 m3/h at STP. From the results of the literature review the following conclusions can be drawn: (1) High specific oxygen absorption values (SOA) [g/m3·m at STP] can be achieved applying shallow tanks, high diffuser densities and low specific air flow rates; (2) High aeration efficiencies (AE) [kg/kWh] can be obtained by applying high volumetric oxygen transfer rates and adequate selection of the blowers used at the wastewater treatment plants.

Online Optimal Ventilation Control of Building Air-conditioning Systems

2010 ◽  
Vol 20 (1) ◽  
pp. 129-136 ◽  
Author(s):  
Shengwei Wang ◽  
Zhongwei Sun ◽  
Yongjun Sun ◽  
Na Zhu
Keyword(s):  
Energy Consumption ◽  
Flow Rate ◽  
Control Strategy ◽  
Air Conditioning ◽  
Air Flow ◽  
Air Flow Rate ◽  
Ventilation Control ◽  
Occupancy Detection ◽  
Critical Zones ◽  
Air Conditioning Systems

This paper presents a ventilation control strategy for multi-zone variable air volume (VAV) air-conditioning systems; integrating the sequential split-range control strategy for air-handing units with an aim to optimise the fresh air flow rate by compromising the indoor air quality and energy consumption. In this strategy, a CO2 -based adaptive demand-controlled ventilation scheme would employ a dynamic multi-zone ventilation equation for multi-zone air-conditioning systems, in which a CO2-based dynamic occupancy detection scheme would be used for online occupancy detection. The strategy would identify the critical zones online, and fully consider the outdoor air demand of critical zones, while, a model-based fresh air flow rate optimal control scheme is employed for VAV air-conditioning systems with the primary air handling units. An adaptive optimisation algorithm would be used for optimising the fresh air flow rate to minimise the energy consumption. The energy saving potentials in the Hong Kong climate condition by optimising fresh air ventilation and the practical implementation of the control strategy are also discussed in this paper.

scholarly journals Evaluation of fish feeder manufactured from local raw materials

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
El-Sayed Khater ◽  
Adel Bahnasawy ◽  
Osama Morsy
Keyword(s):  
Energy Consumption ◽  
Flow Rate ◽  
Specific Energy ◽  
Rotational Speed ◽  
Air Flow ◽  
Specific Energy Consumption ◽  
Air Flow Rate ◽  
Pellet Size ◽  
Automatic Feeder ◽  
Feed Pellets

AbstractAn automatic feeder for fish feeding was manufactured and evaluated successively. Feed pellet size, air flow rate and feeder screw speed were the most important factors affecting the performance and efficiency of the automatic feeder. It was tested at 3 sizes of pellets (1, 2 and 3 mm), 3 air flow rates (10, 15 and 20 m3 min−1) and 5 screw speeds (180, 360, 540, 720 and 900 rpm). The automatic feeder productivity, efficiency, specific energy consumption and costs were determined. The obtained results indicated that the automatic feeder productivity increases with increasing feed pellets size, air flow rate and rotational speed of screw treatments under study, the automatic feeder efficiency increased with increasing rotational speed of screw until it reached the highest value at 540 rpm and then remain constant at 720–900 rpm and after that decreased with increasing speed. Meanwhile, the specific energy consumption of automatic feeder decreased with increasing feed pellets size, air flow rate and rotational speed of screw treatments under study. The total cost of using automatic feeder ranged from 0.09 to 0.16 EGP kg−1 ($ = 15.63 EGP) for all treatments under study. This feeder will save time, effort and cost for fish industry.

Effects of Drying Conditions of Fixed Bed Longan Drying on Optimal Bed Thickness

2007 ◽  
Author(s):  
Aree Achariyaviriya ◽  
Paradorn Nuthong
Keyword(s):  
Energy Consumption ◽  
Air Temperature ◽  
Flow Rate ◽  
Specific Energy ◽  
Air Flow ◽  
Specific Energy Consumption ◽  
Air Flow Rate ◽  
Drying Time ◽  
Bed Thickness ◽  
Drying Conditions

In this work, it is presented a study of the effects of drying conditions on the optimal bed thickness of the whole longan. The criteria for evaluation of the drying process are specific energy consumption and drying time which the difference of moisture between top and bottom of drying chamber is less than 10%dry basis. The mathematical model is developed for finding the effects of the drying conditions on the optimal bed thickness. The drying conditions are drying air temperature, specific air flow rate, and fraction of recycled air. Experimental data were compared with the simulated results to verify the model. Furthermore, the sensitivity analysis of the fraction of air recycled, drying air temperature, specific airflow rate, initial moisture content, and bed thickness of longan are study. The results showed that there was good agreement between the simulated drying rate and those experimentally observed. In addition, there was a well agreement with respect to the shapes of the drying air temperature and product temperature profiles. From the simulated results, the optimal bed thickness of 40 cm, the specific energy consumption of 10.56 MJ/kg-water and drying time of 64.2 h were found. The responsive conditions were drying air temperature of 75°C, the fraction of recycled air of 90%, and the specific air flow rate of 73 kg-dry air/h-kg dry longan.

Model-based Optimal Control of Outdoor Air Flow Rate of an Air-Conditioning System with Primary Air-Handling Unit

2011 ◽  
Vol 20 (6) ◽  
pp. 626-637 ◽  
Author(s):  
Zhongwei Sun ◽  
Shengwei Wang ◽  
Na Zhu
Keyword(s):  
Optimal Control ◽  
Energy Consumption ◽  
Energy Saving ◽  
Flow Rate ◽  
Control Strategy ◽  
Air Conditioning ◽  
Air Flow ◽  
Outdoor Air ◽  
Air Flow Rate ◽  
Optimal Control Strategy

This paper presents a model-based outdoor air flow rate optimal control strategy for multi-zone variable air volume air-conditioning systems with the primary air-handling units. An adaptive optimisation algorithm is adopted for optimising the set point of the outdoor air flow rate to minimise the energy cost, which could compromise the energy consumption of the primary fan and the cooling energy saving by the cold outdoor air. The primary fan energy consumption can be predicted using a simplified incremental fan model and the main parameters of this model are identified online. The cooling energy saving by the outdoor air is estimated online using the enthalpies of the air streams. The lower limit of the outdoor air flow rate is determined by a CO2-based adaptive demand-controlled ventilation strategy using the dynamic multi-space equation to maintain the satisfied indoor air quality (IAQ). Tests were conducted to evaluate the performance of the control strategy applied to a practical building system in simulation environment. The results show that the proposed optimal control strategy can reduce energy consumption significantly, while maintaining a satisfactory IAQ.

scholarly journals Model of thermal buoyancy in cavity-ventilated roof constructions

2021 ◽  
pp. 174425912098418
Author(s):  
Toivo Säwén ◽  
Martina Stockhaus ◽  
Carl-Eric Hagentoft ◽  
Nora Schjøth Bunkholt ◽  
Paula Wahlgren
Keyword(s):  
Analytical Model ◽  
Flow Rate ◽  
Numerical Study ◽  
Air Flow ◽  
Wind Pressure ◽  
Air Flow Rate ◽  
Test Set ◽  
Air Cavity ◽  
Thermal Buoyancy ◽  
The Impact

Timber roof constructions are commonly ventilated through an air cavity beneath the roof sheathing in order to remove heat and moisture from the construction. The driving forces for this ventilation are wind pressure and thermal buoyancy. The wind driven ventilation has been studied extensively, while models for predicting buoyant flow are less developed. In the present study, a novel analytical model is presented to predict the air flow caused by thermal buoyancy in a ventilated roof construction. The model provides means to calculate the cavity Rayleigh number for the roof construction, which is then correlated with the air flow rate. The model predictions are compared to the results of an experimental and a numerical study examining the effect of different cavity designs and inclinations on the air flow rate in a ventilated roof subjected to varying heat loads. Over 80 different test set-ups, the analytical model was found to replicate both experimental and numerical results within an acceptable margin. The effect of an increased total roof height, air cavity height and solar heat load for a given construction is an increased air flow rate through the air cavity. On average, the analytical model predicts a 3% higher air flow rate than found in the numerical study, and a 20% lower air flow rate than found in the experimental study, for comparable test set-ups. The model provided can be used to predict the air flow rate in cavities of varying design, and to quantify the impact of suggested roof design changes. The result can be used as a basis for estimating the moisture safety of a roof construction.

Sign in / Sign up

Export Citation Format

Share Document