scholarly journals Long-Term Station Blackout Accident Analyses of a PWR with RELAP5/MOD3.3

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Andrej Prošek ◽  
Leon Cizelj
Keyword(s):  
Management Strategies ◽  
Severe Accident ◽  
Stress Tests ◽  
Pressurized Water ◽  
Makeup Water ◽  
Reactor Coolant ◽  
The Core ◽  
Station Blackout ◽  
Accident Sequences

Stress tests performed in Europe after accident at Fukushima Daiichi also required evaluation of the consequences of loss of safety functions due to station blackout (SBO). Long-term SBO in a pressurized water reactor (PWR) leads to severe accident sequences, assuming that existing plant means (systems, equipment, and procedures) are used for accident mitigation. Therefore the main objective was to study the accident management strategies for SBO scenarios (with different reactor coolant pumps (RCPs) leaks assumed) to delay the time before core uncovers and significantly heats up. The most important strategies assumed were primary side depressurization and additional makeup water to reactor coolant system (RCS). For simulations of long term SBO scenarios, including early stages of severe accident sequences, the best estimate RELAP5/MOD3.3 and the verified input model of Krško two-loop PWR were used. The results suggest that for the expected magnitude of RCPs seal leak, the core uncovery during the first seven days could be prevented by using the turbine-driven auxiliary feedwater pump and manually depressurizing the RCS through the secondary side. For larger RCPs seal leaks, in general this is not the case. Nevertheless, the core uncovery can be significantly delayed by increasing RCS depressurization.

Source Term Analysis Considering B4C/Steel Interaction and Oxidation During Severe Accidents

2017 ◽  
Author(s):  
Jun Ishikawa ◽  
Tomoyuki Sugiyama ◽  
Yu Maruyama
Keyword(s):  
Source Term ◽  
Severe Accident ◽  
Water Pool ◽  
Energy Agency ◽  
Severe Accidents ◽  
Station Blackout ◽  
Carbon Dioxide Co2 ◽  
Accident Sequences ◽  
Term Analysis

The Japan Atomic Energy Agency (JAEA) is pursuing the development and application of the methodologies on fission product (FP) chemistry for source term analysis by using the integrated severe accident analysis code THALES2. In the present study, models for the eutectic interaction of boron carbide (B4C) with steel and the B4C oxidation were incorporated into THALES2 code and applied to the source term analyses for a boiling water reactor (BWR) with Mark-I containment vessel (CV). Two severe accident sequences with drywell (D/W) failure by overpressure initiated by loss of core coolant injection (TQUV sequence) and long-term station blackout (TB sequence) were selected as representative sequences. The analyses indicated that a much larger amount of species from the B4C oxidation was produced in TB sequence than TQUV sequence. More than a half of carbon dioxide (CO2) produced by the B4C oxidation was predicted to dissolve into the water pool of the suppression chamber (S/C), which could largely influence pH of the water pool and consequent formation and release of volatile iodine species.

Analysis of Potential Hydrogen Risk in the PWR Containment

2006 ◽  
Author(s):  
Deng Jian ◽  
Xuewu Cao
Keyword(s):  
Power Plant ◽  
Nuclear Power ◽  
Management Strategies ◽  
Severe Accident ◽  
Deterministic Approach ◽  
Loss Of Coolant ◽  
Station Blackout ◽  
Containment Pressure ◽  
Accident Sequences ◽  
Containment Integrity

Various studies have shown that hydrogen combustion is one of major risk contributors to threaten the integrity of the containment in a nuclear power plant. That hydrogen risk should be considered in severe accident strategies in current and future NPPs has been emphasized in the latest policies issued by the National Nuclear Safety Administration of China (NNSA). According to a deterministic approach, three typical severe accident sequences for a PWR large dry containment, such as the large break loss-of-coolant (LLOCA), the station blackout (SBO), and the small break loss-of-coolant (SLOCA) are analyzed in this paper with MELCOR code. Hydrogen concentrations in different compartments are observed to evaluate the potential hydrogen risk. The results show that there is a great amount of hydrogen released into the containment, which causes the containment pressure to increase and some potential inconsecutive burnings. Therefore, certain hydrogen management strategies should be considered to reduce the risk to threaten the containment integrity.

Analyses of Feedwater Trip With SBO Sequence of VVER1000 Reactor

2016 ◽  
Vol 2 (4) ◽  
Author(s):  
Guido Mazzini ◽  
Miloš Kynčl ◽  
Marek Ruščák
Keyword(s):  
Nuclear Power ◽  
Lessons Learned ◽  
Severe Accident ◽  
Research Centre ◽  
Stress Tests ◽  
Research Organizations ◽  
Trace Model ◽  
Station Blackout ◽  
Project Prevention

In the Czech Republic, as a follow-up, a consortium of research organizations and universities has decided to simulate selected stress tests’ scenarios, in station blackout (SBO) and the loss of ultimate heat sink (LoUHS), with the aim to verify the national stress report and to analyze time response of respective source term releases. These activities are carried out in the frame of the project prevention, preparedness, and mitigation of consequences of severe accident (SA) at Czech NPPs in relation to lessons learned from stress tests after Fukushima, financed by the Ministry of Interior. The Research Centre Rez has been working on a methods for estimation of leakages and consequences of releases (MELCOR) model for VVER1000 nuclear power plant (NPP) starting with a plant systems nodalization. The aim was to benchmark the MELCOR model with the validated TRAC/RELAP advanced computational engine (TRACE) model, first comparing the steady state and continuing in a long-term SBO plus another event until the beginning of the SA. The presented work is based on the previous paper from the ICONE 23rd Conference hosted in Japan. It focuses mainly on the comparison of the thermohydraulics of the two models created in MELCOR and TRACE codes as outcome of the “Fukushima project.” After that, preliminary general results of the SA progression showing the hydrogen production and the relocation phenomena will be shortly discussed. This scenario is considered closed after some seconds to the break of the lower head. It is important to note that this paper is a substantial update of a previous one (Mazzini et al., 2015, “Analyses of SBO Sequence of VVER1000 Reactor Using TRACE and MELCOR Codes,” 23rd International Conference on Nuclear Engineering (ICONE23)) and although it contains the same descriptive sections, all the results are new.

scholarly journals Assessment of Severe Accident Management for Small IPWR under an ESBO Scenario

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Hao Yu ◽  
Minjun Peng
Keyword(s):  
High Pressure ◽  
Low Pressure ◽  
Lower Pressure ◽  
Severe Accident ◽  
Maximum Temperature ◽  
Pressurized Water ◽  
The Core ◽  
Severe Accidents ◽  
Accident Management ◽  
Degradation Studies

Interest in evaluation of severe accidents induced by extended station blackout (ESBO) has significantly increased after Fukushima. In this paper, the severe accident process under the high and low pressure induced by an ESBO for a small integrated pressurized water reactor (IPWR)-IP200 is simulated with the SCDAP/RELAP5 code. For both types of selected scenarios, the IP200 thermal hydraulic behavior and core meltdown are analyzed without operator actions. Core degradation studies firstly focus on the changes in the core water level and temperature. Then, the inhibition of natural circulation in the reactor pressure vessel (RPV) on core temperature rise is studied. In addition, the phenomena of core oxidation and hydrogen generation and the reaction mechanism of zirconium with the water and steam during core degradation are analyzed. The temperature distribution and time point of the core melting process are obtained. And the IP200 severe accident management guideline (SAMG) entry condition is determined. Finally, it is compared with other core degradation studies of large distributed reactors to discuss the influence of the inherent design characteristics of IP200. Furthermore, through the comparison of four sets of scenarios, the effects of the passive safety system (PSS) on the mitigation of severe accidents are evaluated. Detailed results show that, for the quantitative conclusions, the low coolant storage of IP200 makes the core degradation very fast. The duration from core oxidation to corium relocation in the lower-pressure scenario is 53% faster than that of in the high-pressure scenario. The maximum temperature of liquid corium in the lower-pressure scenario is 134 K higher than that of the high-pressure scenario. Besides, the core forms a molten pool 2.8 h earlier in the lower-pressure scenario. The hydrogen generated in the high-pressure scenario is higher when compared to the low-pressure scenario due to the slower degradation of the core. After the reactor reaches the SAMG entry conditions, the PSS input can effectively alleviate the accident and prevent the core from being damaged and melted. There is more time to alleviate the accident. This study is aimed at providing a reference to improve the existing IPWR SAMGs.

Assessment of Radiological Source Term Releases for Potential Severe Accident Scenarios in a PWR SFP

2018 ◽  
Author(s):  
Kwang-Il Ahn ◽  
Jae-Uk Shin
Keyword(s):  
Water Injection ◽  
Severe Accident ◽  
Base Case ◽  
Source Terms ◽  
Spent Fuel ◽  
Fukushima Accident ◽  
Pressurized Water ◽  
Makeup Water ◽  
Accident Scenarios ◽  
The Impact

The primary purpose of this study is to assess the release of source terms into the environment for representative spent fuel pool (SFP) severe accident scenarios in a reference pressurized water reactor (PWR). For this, two typical accident scenarios (loss-of-cooling and loss-of-pool-inventory accidents) and two different reactor operating modes (normal and refueling modes) are considered in the analysis. The secondary purpose of this study is to assess the impact of an emergency makeup water injection strategy, which is one of representative SFP severe accident mitigation (SAM) strategies being employed after the Fukushima accident, upon the release of the radiological source terms. A total of 16 cases, consisting of four base cases and three injection cases for each base case were simulated using the MELCOR1.8.6 SFP version. The, analysis results are given in terms of (a) the key thermal-hydraulic behaviors during an accident progression and (b) releases of radiological fission products (such as Cesium and Iodine) into the environment. In terms of a release of Cesium and Iodine into the environment, the present study show that the two cases subject to a loss of pool inventory (i.e., LOPI-N-03 and LOPI-R-00) lead to the worst results with the respective release fractions of 77.5% and 59.4%.

Large Break LOCA Accident Management Strategies for Accidents With Large Containment Leaks

2006 ◽  
Author(s):  
Gert Sdouz
Keyword(s):  
Source Term ◽  
Management Strategies ◽  
Severe Accidents ◽  
Loss Of Coolant Accident ◽  
Management Measures ◽  
Accident Management ◽  
Loss Of Coolant ◽  
Station Blackout ◽  
Accident Sequences ◽  
Comprehensive Study

The goal of this work is the investigation of the influence of different accident management strategies on the thermal-hydraulics in the containment during a Large Break Loss of Coolant Accident with a large containment leak from the beginning of the accident. The increasing relevance of terrorism suggests a closer look at this kind of severe accidents. Normally the course of severe accidents and their associated phenomena are investigated with the assumption of an intact containment from the beginning of the accident. This intact containment has the ability to retain a large part of the radioactive inventory. In these cases there is only a release via a very small leakage due to the untightness of the containment up to cavity bottom melt through. This paper represents the last part of a comprehensive study on the influence of accident management strategies on the source term of VVER-1000 reactors. Basically two different accident sequences were investigated: the “Station Blackout”-sequence and the “Large Break LOCA”. In a first step the source term calculations were performed assuming an intact containment from the beginning of the accident and no accident management action. In a further step the influence of different accident management strategies was studied. The last part of the project was a repetition of the calculations with the assumption of a damaged containment from the beginning of the accident. This paper concentrates on the last step in the case of a Large Break LOCA. To be able to compare the results with calculations performed years ago the calculations were performed using the Source Term Code Package (STCP), hydrogen explosions are not considered. In this study four different scenarios have been investigated. The main parameter was the switch on time of the spray systems. One of the results is the influence of different accident management strategies on the source term. In the comparison with the sequence with intact containment it was demonstrated that the accident management measures have quite lower consequences. In addition it was shown that in the case of a “Large Break LOCA”-sequence the intact containment retains the nuclides up to a factor of 20 000. This is much more than in the case of a “Station Blackout”-sequence. Within the frame of the study 17 source terms have been generated to evaluate in detail accident management strategies for VVER-1000 reactors.

scholarly journals Application of ASTEC, MELCOR, and MAAP Computer Codes for Thermal Hydraulic Analysis of a PWR Containment Equipped with the PCFV and PAR Systems

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Siniša Šadek ◽  
Davor Grgić ◽  
Zdenko Šimić
Keyword(s):  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Hydraulic Analysis ◽  
Pressurized Water ◽  
Passive Safety Systems ◽  
European Code ◽  
Station Blackout ◽  
Computer Codes ◽  
Safety Systems ◽  
Thermal Hydraulic Analysis

The integrity of the containment will be challenged during a severe accident due to pressurization caused by the accumulation of steam and other gases and possible ignition of hydrogen and carbon monoxide. Installation of a passive filtered venting system and passive autocatalytic recombiners allows control of the pressure, radioactive releases, and concentration of flammable gases. Thermal hydraulic analysis of the containment equipped with dedicated passive safety systems after a hypothetical station blackout event is performed for a two-loop pressurized water reactor NPP with three integral severe accident codes: ASTEC, MELCOR, and MAAP. MELCOR and MAAP are two major US codes for severe accident analyses, and the ASTEC code is the European code, joint property of Institut de Radioprotection et de Sûreté Nucléaire (IRSN, France) and Gesellschaft für Anlagen und Reaktorsicherheit (GRS, Germany). Codes’ overall characteristics, physics models, and the analysis results are compared herein. Despite considerable differences between the codes’ modelling features, the general trends of the NPP behaviour are found to be similar, although discrepancies related to simulation of the processes in the containment cavity are also observed and discussed in the paper.

Severe Accident Context Quantification for Long-Term Station Blackout in Boiling Water Reactor Nuclear Power Plants

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Gueorgui I. Petkov ◽  
Monica Vela-Garcia
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Boiling Water ◽  
Severe Accident ◽  
Boiling Water Reactor ◽  
Water Reactor ◽  
Accident Scenario ◽  
Station Blackout ◽  
Fukushima Daiichi

The realistic study of dynamic accident context is an invaluable tool to address the uncertainties and their impact on safety assessment and management. The capacities of the performance evaluation of teamwork (PET) procedure for dynamic context quantification and determination of alternatives, coordination, and monitoring of human performance and decision-making are discussed in this paper. The procedure is based on a thorough description of symptoms during the accident scenario progressions with the use of thermo-hydraulic (TH) model and severe accident (SA) codes (melcor and maap). The opportunities of PET procedure for context quantification are exemplified for the long-term station blackout (LT SBO) accident scenario at Fukushima Daiichi #1 and a hypothetic unmitigated LT SBO at peach bottom #1 boiling water reactor (BWR) reactor nuclear power plants (NPPs). The context quantification of these LT SBO scenarios is based on the IAEA Fukushima Daiichi accident report, “State-of-the-Art Reactor Consequence Analysis” and TH calculations made by using maap code at the EC Joint Research Centre.

Sign in / Sign up

Export Citation Format

Share Document