scholarly journals Non-Newtonian Effects of Second-Order Fluids on the Hydrodynamic Lubrication of Inclined Slider Bearings

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Siddangouda Apparao ◽  
Trimbak Vaijanath Biradar ◽  
Neminath Bhujappa Naduvinamani
Keyword(s):  
Frictional Force ◽  
Carrying Capacity ◽  
Second Order ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Pressure Load ◽  
Slider Bearings ◽  
Highly Nonlinear ◽  
Load Carrying ◽  
Second Order Fluids

Theoretical study of non-Newtonian effects of second-order fluids on the performance characteristics of inclined slider bearings is presented. An approximate method is used for the solution of the highly nonlinear momentum equations for the second-order fluids. The closed form expressions for the fluid film pressure, load carrying capacity, frictional force, coefficient of friction, and centre of pressure are obtained. The non-Newtonian second order fluid model increases the film pressure, load carrying capacity, and frictional force whereas the center of pressure slightly shifts towards exit region. Further, the frictional coefficient decreases with an increase in the bearing velocity as expected for an ideal fluid.

Effect of viscosity variation on non-Newtonian lubrication of squeeze film conical bearing having porous wall operating with Rabinowitsch fluid model

2018 ◽  
Vol 233 (7) ◽  
pp. 2538-2551 ◽  
Author(s):  
Pentyala Srinivasa Rao ◽  
Amit Kumar Rahul
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Porous Wall ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Pressure Load ◽  
Load Carrying ◽  
Newtonian Case ◽  
Viscosity Variation

In this study, the effect of viscosity variation of non-Newtonian lubrication on squeeze film characteristics with porous and Rabinowitsch fluid for conical bearings is analyzed. The modified Reynolds equation representing the characteristics of non-Newtonian fluid with viscosity variation on the porous wall followed by the cubic stress law condition is invoked. For lubricant flow in a bearing clearance and in a porous layer Morgan–Cameron approximation is considered. A small perturbation technique is used to compute the pressure generation using modified Reynolds equation of lubrication. Approximate analytical solutions have been obtained for the squeeze film pressure, load-carrying capacity, squeeze film time, and center of pressure. The outcomes are displayed in diagrams and tables, which show that the effect of viscosity variation and porous wall on the squeeze film lubrication of conical bearings decreases film pressure, load-carrying capacity, and response time for the Newtonian case in comparison to the non-Newtonian case.

Hydrodynamic Lubrication of Finite Slider Bearings: Effect of One Dimensional Film Shape, and Their Computer Aided Optimum Designs

1983 ◽  
Vol 105 (1) ◽  
pp. 48-63 ◽  
Author(s):  
C. Bagci ◽  
A. P. Singh
Keyword(s):  
Numerical Solution ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Hydrodynamic Lubrication ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Design Data ◽  
Slider Bearings ◽  
Load Carrying ◽  
Computer Aided

The effect of the film shape on the load carrying capacity of a hydrodynamically lubricated bearing has not been considered an important factor in the past. Flat-faced tapered bearing and the Raileigh’s step bearing of constant film thickness have been the primary forms of film shapes for slider bearing studies and design data developments. This article, by the computer aided numerical solution of the Reynolds equation for two dimensional incompressible lubricant flow, investigates hydrodynamically lubricated slider bearings having different film shapes and studies the effect of the film shape on the performance characteristics of finite bearings; and it shows that optimized bearing with film shapes having descending slope toward the trailing edge of the bearing has considerably higher load carrying capacity than the optimized flat-faced tapered bearing of the same properties. For example the truncated cycloidal film shape yields 26.3 percent higher load carrying capacity for Lz/Lx = 1 size ratio, and 44 percent higher for Lz/Lx = 1/2. The article then presents charts for the optimum designs of finite slider bearings having tapered, exponential, catenoidal, polynomial, and truncated-cycloidal film shapes, and illustrates their use in numerical bearing design examples. These charts also furnish information on flow rate, side leakage, temperature rise, coefficient of friction, and friction power loss in optimum bearings. Appended to the article are analytical solutions for infinitely wide bearings with optimum bearing characteristics. The computer aided numerical solution of the Reynolds equation in most general form is presented by which finite or infinitely wide hydrodynamically or hydrostatically lubricated bearings, externally pressurized or not, can be studied. A digital computer program is made available.

On the study of Rayleigh step slider bearings lubricated with non-Newtonian Rabinowitsch fluid

2017 ◽  
Vol 69 (5) ◽  
pp. 666-672
Author(s):  
N.B. Naduvinamani ◽  
Siddharam Patil ◽  
S.S. Siddapur
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Maximum Load ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Content Type ◽  
Slider Bearings ◽  
Load Carrying ◽  
Modified Reynolds Equation ◽  
Frictional Coefficients

Purpose Nowadays, the use of Newtonian fluid as a lubricant is diminishing day by day, and the use of non-Newtonian fluids has gained importance. This paper presents an analysis of the static characteristics of Rayleigh step slider bearing lubricated with non-Newtonian Rabinowitsch fluid, which has not been studied so far. The purpose of this paper is to derive the modified Reynolds equation for Rabinowitsch fluids for two regions and to obtain the optimum bearing parameters for the Rayleigh step slider bearings. Design/methodology/approach The governing equations relevant to the problem under consideration are derived. The modified Reynolds equation is derived, and it is found to be highly non-linear and hence small perturbation method is adopted to find solution. Findings From this study it is found that there is an increase in the load-carrying capacity, pressure and frictional coefficients for dilatant fluids as compared to the corresponding Newtonian case. Further, for dilatant lubricants the maximum load-carrying capacity is attained for the slightly larger values of entry region length of Rayleigh step bearing as compared to Newtonian and pseudoplastic lubricants. Originality/value Rabinowitsch fluid is used for the study of lubrication characteristics of Rayleigh step bearings. The author believes that the paper presents these results for the first time.

scholarly journals Non-Newtonian Effects on the Squeeze Film Characteristics between a Sphere and a Flat Plate: Rabinowitsch Model

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Udaya P. Singh ◽  
Ram S. Gupta
Keyword(s):  
Flat Plate ◽  
Carrying Capacity ◽  
Significant Variation ◽  
Reynolds Equation ◽  
Fluid Model ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Load Carrying ◽  
Film Characteristics

The use of additives (polyisobutylene, ethylene-propylene, lithium hydroxy stearate, hydrophobic silica, etc.) changes lubricants’ rheology due to which they show pseudoplastic and dilatant nature, which can be modelled as cubic stress fluid model (Rabinowitsch fluid model). The present theoretical analysis investigates the effects of non-Newtonian pseudoplastic and dilatant lubricants on the squeezing characteristics of a sphere and a flat plate. The modified Reynolds equation has been derived and an asymptotic solution for film pressure is obtained. The results for the film pressure distribution, load carrying capacity, and squeezing time characteristics have been calculated for various values of pseudoplastic parameter and compared with the Newtonian results. These characteristics show a significant variation with the non-Newtonian pseudoplastic and dilatant behavior of the fluids.

The Pivoted, Spherical Cap Slider Bearing

1982 ◽  
Vol 104 (2) ◽  
pp. 216-219
Author(s):  
J. W. Lund
Keyword(s):  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Piston Motion ◽  
Spherical Cap ◽  
Slider Bearings ◽  
Positive Displacement ◽  
Load Carrying

In hydraulic pumps of the positive displacement type, the shoes which guide the piston motion may be designed as pivoted slider bearings. One such design, where the bearing geometry is that of a spherical cap, is analyzed and results are presented for the load carrying capacity and the friction.

Effect of partial grooving on the performance of hydrodynamic journal bearing

2017 ◽  
Vol 69 (4) ◽  
pp. 574-584 ◽  
Author(s):  
Anil B. Shinde ◽  
Prashant M. Pawar
Keyword(s):  
Carrying Capacity ◽  
Power Loss ◽  
Journal Bearing ◽  
Fluid Film ◽  
Frictional Torque ◽  
Load Carrying Capacity ◽  
Bearing Surface ◽  
Film Pressure ◽  
Content Type ◽  
Load Carrying

Purpose This study aims to improve the performance of hydrodynamic journal bearings through partial grooving on the bearing surface. Design/methodology/approach Bearing performance analysis is numerically carried out using the thin film flow physics of COMSOL Multiphysics 5.0 software. Initially, the static performance analysis is carried out for hydrodynamic journal bearing system with smooth surface, and the results of the same are validated with results from the literature. In the later part of the paper, the partial rectangular shape micro-textures are modeled on bearing surface. The effects of partial groove pattern on the bearing performance parameters, namely, fluid film pressure, load carrying capacity, frictional power loss and frictional torque, are studied in detail. Findings The numerical results show that the values of maximum fluid film pressure, load carrying capacity, frictional power loss and frictional torque are considerably improved due to deterministic micro-textures. Bearing surface with partial groove along 90°-180° region results in 81.9 per cent improvement in maximum fluid film pressure and 75.9 per cent improvement in load carrying capacity as compared with smooth surface of journal bearing, with no increase in frictional power loss and frictional torque. Maximum decrease in frictional power loss and frictional torque is observed for partially grooving along 90°-360° region. The simulations are supported by proof-of-concept experimentation. Originality/value This study is useful in the appropriate selection of groove parameters on bearing surface to the bearing performance characteristics.

scholarly journals EFFECT OF SURFACE ROUGHNESS ON STEADY PERFORMANCE OF HYDROSTATIC THRUST BEARINGS: RABINOWITSCH FLUID MODEL

2019 ◽  
Author(s):  
Udaya Pratap Singh
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Load Capacity ◽  
Numerical Results ◽  
Integral Approach ◽  
Load Carrying Capacity ◽  
Film Pressure ◽  
Thrust Bearings ◽  
Longitudinal Roughness ◽  
Load Carrying

Purpose of the present theoretical investigation is to analyze the effects of surface roughness on the steady-state performance of stepped circular hydrostatic thrust bearings lubricated with non-Newtonian Rabinowitsch type fluids. Results for film pressure and load-carrying capacity have been plotted and analyzed on the basis of numerical results. To take the effects of surface roughness into account, Christensen theory of rough surface has been adopted. The expression for pressure gradient has been derived by means of the energy integral approach. This approach avoids the derivation of Reynolds’ equation. The numerical results for film pressure and load capacity have been obtained using Mathematica. It was observed that in comparison with smooth surfaces, dimensionless film pressure and load capacity is lower for longitudinal roughness and higher for circular roughness patterns with and the variations are significant. Load carrying capacity decreases with the increase of longitudinal roughness and, increases with the increase of circular roughness. Further, the effects of surface roughness and non-Newtonian lubricants are significant for larger values of inertia parameter. Because of the closeness of results to the experimental values, this study will be helpful in the design of circular hydrostatic thrust bearings.

An Analysis of Powder Lubricated Slider Bearings

1996 ◽  
Vol 118 (1) ◽  
pp. 206-214 ◽  
Author(s):  
K. T. McKeague ◽  
M. M. Khonsari
Keyword(s):  
Boundary Conditions ◽  
Carrying Capacity ◽  
Parametric Study ◽  
Experimental Measurements ◽  
Load Carrying Capacity ◽  
General Boundary Conditions ◽  
Slider Bearing ◽  
Slider Bearings ◽  
Load Carrying ◽  
Theoretical Predictions

A theory for predicting the behavior of powder lubricated slider bearings based on the collisional characteristics of the grain particles and their interactions at the boundaries is presented. General boundary conditions that account for the effects of powder slippage are applied to the slider bearing configuration. Theoretical predictions are presented with comparison to published experimental measurements. An extensive parametric study is also conducted to illustrate the behavior of the flow and the response of the bearing’s load-carrying capacity and friction factor to changes in various powder material and boundary parameters.

Sign in / Sign up

Export Citation Format

Share Document