An Analysis of Powder Lubricated Slider Bearings

1996 ◽  
Vol 118 (1) ◽  
pp. 206-214 ◽  
Author(s):  
K. T. McKeague ◽  
M. M. Khonsari
Keyword(s):  
Boundary Conditions ◽  
Carrying Capacity ◽  
Parametric Study ◽  
Experimental Measurements ◽  
Load Carrying Capacity ◽  
General Boundary Conditions ◽  
Slider Bearing ◽  
Slider Bearings ◽  
Load Carrying ◽  
Theoretical Predictions

A theory for predicting the behavior of powder lubricated slider bearings based on the collisional characteristics of the grain particles and their interactions at the boundaries is presented. General boundary conditions that account for the effects of powder slippage are applied to the slider bearing configuration. Theoretical predictions are presented with comparison to published experimental measurements. An extensive parametric study is also conducted to illustrate the behavior of the flow and the response of the bearing’s load-carrying capacity and friction factor to changes in various powder material and boundary parameters.

Hydrodynamic Lubrication of Finite Slider Bearings: Effect of One Dimensional Film Shape, and Their Computer Aided Optimum Designs

1983 ◽  
Vol 105 (1) ◽  
pp. 48-63 ◽  
Author(s):  
C. Bagci ◽  
A. P. Singh
Keyword(s):  
Numerical Solution ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Hydrodynamic Lubrication ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Design Data ◽  
Slider Bearings ◽  
Load Carrying ◽  
Computer Aided

The effect of the film shape on the load carrying capacity of a hydrodynamically lubricated bearing has not been considered an important factor in the past. Flat-faced tapered bearing and the Raileigh’s step bearing of constant film thickness have been the primary forms of film shapes for slider bearing studies and design data developments. This article, by the computer aided numerical solution of the Reynolds equation for two dimensional incompressible lubricant flow, investigates hydrodynamically lubricated slider bearings having different film shapes and studies the effect of the film shape on the performance characteristics of finite bearings; and it shows that optimized bearing with film shapes having descending slope toward the trailing edge of the bearing has considerably higher load carrying capacity than the optimized flat-faced tapered bearing of the same properties. For example the truncated cycloidal film shape yields 26.3 percent higher load carrying capacity for Lz/Lx = 1 size ratio, and 44 percent higher for Lz/Lx = 1/2. The article then presents charts for the optimum designs of finite slider bearings having tapered, exponential, catenoidal, polynomial, and truncated-cycloidal film shapes, and illustrates their use in numerical bearing design examples. These charts also furnish information on flow rate, side leakage, temperature rise, coefficient of friction, and friction power loss in optimum bearings. Appended to the article are analytical solutions for infinitely wide bearings with optimum bearing characteristics. The computer aided numerical solution of the Reynolds equation in most general form is presented by which finite or infinitely wide hydrodynamically or hydrostatically lubricated bearings, externally pressurized or not, can be studied. A digital computer program is made available.

On the study of Rayleigh step slider bearings lubricated with non-Newtonian Rabinowitsch fluid

2017 ◽  
Vol 69 (5) ◽  
pp. 666-672
Author(s):  
N.B. Naduvinamani ◽  
Siddharam Patil ◽  
S.S. Siddapur
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Maximum Load ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Content Type ◽  
Slider Bearings ◽  
Load Carrying ◽  
Modified Reynolds Equation ◽  
Frictional Coefficients

Purpose Nowadays, the use of Newtonian fluid as a lubricant is diminishing day by day, and the use of non-Newtonian fluids has gained importance. This paper presents an analysis of the static characteristics of Rayleigh step slider bearing lubricated with non-Newtonian Rabinowitsch fluid, which has not been studied so far. The purpose of this paper is to derive the modified Reynolds equation for Rabinowitsch fluids for two regions and to obtain the optimum bearing parameters for the Rayleigh step slider bearings. Design/methodology/approach The governing equations relevant to the problem under consideration are derived. The modified Reynolds equation is derived, and it is found to be highly non-linear and hence small perturbation method is adopted to find solution. Findings From this study it is found that there is an increase in the load-carrying capacity, pressure and frictional coefficients for dilatant fluids as compared to the corresponding Newtonian case. Further, for dilatant lubricants the maximum load-carrying capacity is attained for the slightly larger values of entry region length of Rayleigh step bearing as compared to Newtonian and pseudoplastic lubricants. Originality/value Rabinowitsch fluid is used for the study of lubrication characteristics of Rayleigh step bearings. The author believes that the paper presents these results for the first time.

The Pivoted, Spherical Cap Slider Bearing

1982 ◽  
Vol 104 (2) ◽  
pp. 216-219
Author(s):  
J. W. Lund
Keyword(s):  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Piston Motion ◽  
Spherical Cap ◽  
Slider Bearings ◽  
Positive Displacement ◽  
Load Carrying

In hydraulic pumps of the positive displacement type, the shoes which guide the piston motion may be designed as pivoted slider bearings. One such design, where the bearing geometry is that of a spherical cap, is analyzed and results are presented for the load carrying capacity and the friction.

The Magnetohydrodynamic Slider Bearing

1962 ◽  
Vol 84 (1) ◽  
pp. 197-202 ◽  
Author(s):  
William T. Snyder
Keyword(s):  
Magnetic Field ◽  
Liquid Metal ◽  
Boundary Conditions ◽  
Carrying Capacity ◽  
Load Capacity ◽  
Numerical Data ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Electrically Conducting ◽  
Load Carrying

An analysis is presented of the slider bearing using an electrically conducting lubricant, such as a liquid metal, in the presence of a magnetic field. The solution permits the calculation of the load-carrying capacity of the bearing. A comparison is made with the classical slider bearing solution. It is shown that the load capacity of the bearing depends on the electromagnetic boundary conditions entering through the conductivity of the bearing surfaces. Numerical data are presented for nonconducting surfaces with the emphasis on a comparison between the classical bearing and the magnetohydrodynamic bearing characteristics. It is shown that a significant increase in load capacity is possible with liquid metal lubricants in the presence of a magnetic field.

The Thermally Boosted Oil Lubricated Sliding Thrust Bearing

1974 ◽  
Vol 96 (3) ◽  
pp. 322-328 ◽  
Author(s):  
C. M. Rodkiewicz ◽  
J. C. Hinds ◽  
C. Dayson
Keyword(s):  
Boundary Conditions ◽  
Carrying Capacity ◽  
Thrust Bearing ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Governing Equations ◽  
Temperature Ratio ◽  
Thrust Bearings ◽  
Temperature Boundary ◽  
Load Carrying

The effect of varying the ratio of slider to pad temperature boundary conditions and the influence of varying inlet to outlet ratio of a plane infinitely wide slider bearing is examined. The lubricant is assumed to be incompressible and the variation of viscosity with temperature is taken into account. The nondimensionalized governing equations, transformed in terms of the stream function, are solved numerically. The results show that maintaining a lower slider temperature to pad temperature ratio causes an increase in the load carrying capacity of the bearing. A means of which advantage could be taken of this effect in the design of thrust bearings is suggested.

Perturbation Solution of the 1-D Reynolds Equation With Slip Boundary Conditions

1978 ◽  
Vol 100 (1) ◽  
pp. 70-73 ◽  
Author(s):  
Aron Sereny ◽  
Vittorio Castelli
Keyword(s):  
Boundary Conditions ◽  
Numerical Solution ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Load Carrying Capacity ◽  
Slip Boundary Conditions ◽  
Slider Bearing ◽  
Slip Boundary ◽  
Load Carrying ◽  
Bearing Number

The method of matched asymptotic expansion is applied to obtain the pressure distribution and the load carrying capacity for an infinitely long slider bearing, operating under high-speed, low-height, with slip boundary conditions. The pressure distribution is easily applicable as the starting solution for the iterative numerical solution of Reynolds equation. Two examples given show extremely good correlation between this expansion and the numerical solution. It is shown that, for a tapered slider bearing with a bearing number above 100, the reduction in load because of slip is minimal and that, for a parabolic slider, there exists a certain unique bearing number for which the load carrying capacity is independent of the parabolic crown of the slider. It is shown that for a wide slider bearing with large bearing number, the effect of slip is on the order of 1/A.

A Comparison of Porous Structures on the Performance of a Slider Bearing with Surface Roughness in Couple Stress Fluid Film Lubrication

2015 ◽  
Vol 813-814 ◽  
pp. 921-937
Author(s):  
P.S. Rao ◽  
Santosh Agarwal
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Type Equation ◽  
Random Variable ◽  
Couple Stress Fluid ◽  
Load Carrying Capacity ◽  
Porous Structures ◽  
Slider Bearing ◽  
Load Carrying

This paper presents the theoretical study and analyzes the comparison of porous structures on the performance of a couple stress fluid based on rough slider bearing. The globular sphere model of Kozeny-Carman and Irmay’s capillary fissures model have been subjected to investigations. A more general form of surface roughness is mathematically modeled by a stochastic random variable with non-zero mean, variance and skewness. The stochastically averaged Reynolds type equation has been solved under suitable boundary conditions to obtain the pressure distribution in turn which gives the expression for the load carrying capacity, frictional force and coefficient of friction. The results are illustrated by graphical representations which show that the introduction of combined porous structure with couple stress fluid results in an enhanced load carrying capacity more in the case of Kozeny-Carman model as compared to Irmay’s model.

scholarly journals A STUDY OF FERROFLUID LUBRICATION BASED ROUGH SINE FILM SLIDER BEARING WITH ASSORTED POROUS STRUCTURE

2019 ◽  
Vol 59 (2) ◽  
pp. 144-152
Author(s):  
Mohmmadraiyan M. Munshi ◽  
Ashok R. Patel ◽  
Gunamani B. Deheri
Keyword(s):  
Porous Structure ◽  
Carrying Capacity ◽  
Graphical Representation ◽  
Negative Impact ◽  
Positive Impact ◽  
Numerical Approach ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Load Carrying ◽  
The Impact

This paper attempts to study a ferrofluid lubrication based rough sine film slider bearing with assorted porous structure using a numerical approach. The fluid flow of the system is regulated by the Neuringer-Rosensweig model. The impact of the transverse surface roughness of the system has been derived using the Christensen and Tonder model. The corresponding Reynolds’ equation has been used to calculate the pressure distribution which, in turn, has been the key to formulate the load carrying capacity equation. A graphical representation is made to demonstrate the calculated value of the load carrying capacity which is a dimensionless unit. The numbers thus derived have been used to prove that ferrofluid lubrication aids the load carrying capacity. The study suggests that the positive impact created by magnetization in the case of negatively skewed roughness helps to partially nullify the negative impact of the transverse roughness. Further investigation implies that when the Kozeny-Carman’s model is used, the overall performance is enhanced. The Kozeny-Carman’s model is a form of an empirical equation used to calculate permeability that is dependent on various parameters like pore shape, turtuosity, specific surface area and porosity. The success of the model can be accredited to its simplicity and efficiency to describe measured permeability values. The obtained equation was used to predict the permeability of fibre mat systems and of vesicular rocks.

Sign in / Sign up

Export Citation Format

Share Document