scholarly journals Iterative Learning Control Design and Application for Linear Continuous Systems with Variable Initial States Based on 2-D System Theory

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Wei Guan ◽  
Qiao Zhu ◽  
Xu-Dong Wang ◽  
Xu-Hui Liu

This paper is concerned with the variable initial states problem in iterative learning control (ILC) for linear continuous systems. Firstly, the properties of the trajectory of 2-D continuous-discrete Roesser model are analyzed by using Lyapunov's method. Then, for any variable initial states which absolutely converge to the desired initial state, some ILC design criteria in the form of linear matrix inequalities (LMI) are given to ensure the convergence of the PD-type ILC rules. The convergence for variable initial states implies that the ILC rules can be used to achieve the perfect tacking for variable initial states, even if the system dynamic is unknown. Finally, the micropropulsion system is considered to illustrate efficiency of the proposed ILC design criteria.

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Zhang Qunli

An iterative learning control problem for nonlinear systems with delays is studied in detail in this paper. By introducing theλ-norm and being inspired by retarded Gronwall-like inequality, the novel sufficient conditions for robust convergence of the tracking error, whose initial states are not zero, with time delays are obtained. Finally, simulation example is given to illustrate the effectiveness of the proposed method.


Author(s):  
Zimian Lan

In this paper, we propose a new iterative learning control algorithm for sensor faults in nonlinear systems. The algorithm does not depend on the initial value of the system and is combined with the open-loop D-type iterative learning law. We design a period that shortens as the number of iterations increases. During this period, the controller corrects the state deviation, so that the system tracking error converges to the boundary unrelated to the initial state error, which is determined only by the system’s uncertainty and interference. Furthermore, based on the λ norm theory, the appropriate control gain is selected to suppress the tracking error caused by the sensor fault, and the uniform convergence of the control algorithm and the boundedness of the error are proved. The simulation results of the speed control of the injection molding machine system verify the effectiveness of the algorithm.


Complexity ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-6
Author(s):  
Yun-Shan Wei ◽  
Qing-Yuan Xu

For linear discrete-time systems with randomly variable input trail length, a proportional- (P-) type iterative learning control (ILC) law is proposed. To tackle the randomly variable input trail length, a modified control input at the desirable trail length is introduced in the proposed ILC law. Under the assumption that the initial state fluctuates around the desired initial state with zero mean, the designed ILC scheme can drive the ILC tracking errors to zero at the desirable trail length in expectation sense. The designed ILC algorithm allows the trail length of control input which is different from system state and output at a specific iteration. In addition, the identical initial condition widely used in conventional ILC design is also mitigated. An example manifests the validity of the proposed ILC algorithm.


2014 ◽  
Vol 2014 ◽  
pp. 1-11
Author(s):  
Lun Zhai ◽  
Guohui Tian ◽  
Yan Li

A parametric learning based robust iterative learning control (ILC) scheme is applied to the time varying delay multiple-input and multiple-output (MIMO) linear systems. The convergence conditions are derived by using theH∞and linear matrix inequality (LMI) approaches, and the convergence speed is analyzed as well. A practical identification strategy is applied to optimize the learning laws and to improve the robustness and performance of the control system. Numerical simulations are illustrated to validate the above concepts.


Sign in / Sign up

Export Citation Format

Share Document