scholarly journals Cardiopulmonary Resuscitation Pattern Evaluation Based on Ensemble Empirical Mode Decomposition Filter via Nonlinear Approaches

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Muammar Sadrawi ◽  
Wei-Zen Sun ◽  
Matthew Huei-Ming Ma ◽  
Chun-Yi Dai ◽  
Maysam F. Abbod ◽  
...  
Keyword(s):  
Survival Rate ◽  
Cardiopulmonary Resuscitation ◽  
Empirical Mode Decomposition ◽  
Nonlinear Approximation ◽  
Ensemble Empirical Mode Decomposition ◽  
Ecg Signal ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Significant Difference

Good quality cardiopulmonary resuscitation (CPR) is the mainstay of treatment for managing patients with out-of-hospital cardiac arrest (OHCA). Assessment of the quality of the CPR delivered is now possible through the electrocardiography (ECG) signal that can be collected by an automated external defibrillator (AED). This study evaluates a nonlinear approximation of the CPR given to the asystole patients. The raw ECG signal is filtered using ensemble empirical mode decomposition (EEMD), and the CPR-related intrinsic mode functions (IMF) are chosen to be evaluated. In addition, sample entropy (SE), complexity index (CI), and detrended fluctuation algorithm (DFA) are collated and statistical analysis is performed using ANOVA. The primary outcome measure assessed is the patient survival rate after two hours. CPR pattern of 951 asystole patients was analyzed for quality of CPR delivered. There was no significant difference observed in the CPR-related IMFs peak-to-peak interval analysis for patients who are younger or older than 60 years of age, similarly to the amplitude difference evaluation for SE and DFA. However, there is a difference noted for the CI (p<0.05). The results show that patients group younger than 60 years have higher survival rate with high complexity of the CPR-IMFs amplitude differences.

scholarly journals Denoising the ECG Signal Using Ensemble Empirical Mode Decomposition

2021 ◽  
Vol 11 (5) ◽  
pp. 7536-7541
Author(s):  
W. Mohguen ◽  
S. Bouguezel
Keyword(s):  
Empirical Mode Decomposition ◽  
Additive White Gaussian Noise ◽  
Ensemble Empirical Mode Decomposition ◽  
Ecg Signal ◽  
Mean Square ◽  
Intrinsic Mode Functions ◽  
Denoising Method ◽  
Mode Decomposition ◽  
Mean Square Difference ◽  
Thresholding Function

In this paper, a novel electrocardiogram (ECG) denoising method based on the Ensemble Empirical Mode Decomposition (EEMD) is proposed by introducing a modified customized thresholding function. The basic principle of this method is to decompose the noisy ECG signal into a series of Intrinsic Mode Functions (IMFs) using the EEMD algorithm. Moreover, a modified customized thresholding function was adopted for reducing the noise from the ECG signal and preserve the QRS complexes. The denoised signal was reconstructed using all thresholded IMFs. Real ECG signals having different Additive White Gaussian Noise (AWGN) levels were employed from the MIT-BIH database to evaluate the performance of the proposed method. For this purpose, output SNR (SNRout), Mean Square Error (MSE), and Percentage Root mean square Difference (PRD) parameters were used at different input SNRs (SNRin). The simulation results showed that the proposed method provided significant improvements over existing denoising methods.

scholarly journals A Fast Approach to Removing Muscle Artifacts for EEG with Signal Serialization Based Ensemble Empirical Mode Decomposition

Entropy ◽  
2021 ◽  
Vol 23 (9) ◽  
pp. 1170
Author(s):  
Yangyang Dai ◽  
Feng Duan ◽  
Fan Feng ◽  
Zhe Sun ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Real Time ◽  
Empirical Mode Decomposition ◽  
Mean Squared Error ◽  
Simulated Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Eeg Signals ◽  
Mode Decomposition ◽  
Significant Difference ◽  
The Brain

An electroencephalogram (EEG) is an electrophysiological signal reflecting the functional state of the brain. As the control signal of the brain–computer interface (BCI), EEG may build a bridge between humans and computers to improve the life quality for patients with movement disorders. The collected EEG signals are extremely susceptible to the contamination of electromyography (EMG) artifacts, affecting their original characteristics. Therefore, EEG denoising is an essential preprocessing step in any BCI system. Previous studies have confirmed that the combination of ensemble empirical mode decomposition (EEMD) and canonical correlation analysis (CCA) can effectively suppress EMG artifacts. However, the time-consuming iterative process of EEMD may limit the application of the EEMD-CCA method in real-time monitoring of BCI. Compared with the existing EEMD, the recently proposed signal serialization based EEMD (sEEMD) is a good choice to provide effective signal analysis and fast mode decomposition. In this study, an EMG denoising method based on sEEMD and CCA is discussed. All of the analyses are carried out on semi-simulated data. The results show that, in terms of frequency and amplitude, the intrinsic mode functions (IMFs) decomposed by sEEMD are consistent with the IMFs obtained by EEMD. There is no significant difference in the ability to separate EMG artifacts from EEG signals between the sEEMD-CCA method and the EEMD-CCA method (p > 0.05). Even in the case of heavy contamination (signal-to-noise ratio is less than 2 dB), the relative root mean squared error is about 0.3, and the average correlation coefficient remains above 0.9. The running speed of the sEEMD-CCA method to remove EMG artifacts is significantly improved in comparison with that of EEMD-CCA method (p < 0.05). The running time of the sEEMD-CCA method for three lengths of semi-simulated data is shortened by more than 50%. This indicates that sEEMD-CCA is a promising tool for EMG artifact removal in real-time BCI systems.

Ensemble Empirical Mode Decomposition Based Deep Learning Model for Short-Term Wind Power Forecasting

2022 ◽  
Author(s):  
J.M. González-Sopeña
Keyword(s):  
Deep Learning ◽  
Wind Power ◽  
Empirical Mode Decomposition ◽  
Time Series Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Series Data ◽  
Intrinsic Mode Functions ◽  
Wind Power Forecasting ◽  
Mode Decomposition ◽  
Power Forecasting

Abstract. In the last few years, wind power forecasting has established itself as an essential tool in the energy industry due to the increase of wind power penetration in the electric grid. This paper presents a wind power forecasting method based on ensemble empirical mode decomposition (EEMD) and deep learning. EEMD is employed to decompose wind power time series data into several intrinsic mode functions and a residual component. Afterwards, every intrinsic mode function is trained by means of a CNN-LSTM architecture. Finally, wind power forecast is obtained by adding the prediction of every component. Compared to the benchmark model, the proposed approach provides more accurate predictions for several time horizons. Furthermore, prediction intervals are modelled using quantile regression.

Spatiotemporal Trend and Variability of Precipitation in Taiwan Based on Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD)

2021 ◽  
Author(s):  
Chun-Hsiang Tang ◽  
Christina W. Tsai
Keyword(s):  
Time Series ◽  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Short Term ◽  
Time Frequency ◽  
Spatial Locality ◽  
Temperature And Precipitation ◽  
Mode Decomposition ◽  
Climatic Scenarios

&lt;p&gt;Abstract&lt;/p&gt;&lt;p&gt;Most of the time series in nature are nonlinear and nonstationary affected by climate change particularly. It is inevitable that Taiwan has also experienced frequent drought events in recent years. However, drought events are natural disasters with no clear warnings and their influences are cumulative. The difficulty of detecting and analyzing the drought phenomenon remains. To deal with the above-mentioned problem, Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD) is introduced to analyze the temperature and rainfall data from 1975~2018 in this study, which is a powerful method developed for the time-frequency analysis of nonlinear, nonstationary time series. This method can not only analyze the spatial locality and temporal locality of signals but also decompose the multiple-dimensional time series into several Intrinsic Mode Functions (IMFs). By the set of IMFs, the meaningful instantaneous frequency and the trend of the signals can be observed. Considering stochastic and deterministic influences, to enhance the accuracy this study also reconstruct IMFs into two components, stochastic and deterministic, by the coefficient of auto-correlation.&lt;/p&gt;&lt;p&gt;In this study, the influences of temperature and precipitation on the drought events will be discussed. Furthermore, to decrease the significant impact of drought events, this study also attempts to forecast the occurrences of drought events in the short-term via the Artificial Neural Network technique. And, based on the CMIP5 model, this study also investigates the trend and variability of drought events and warming in different climatic scenarios.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;Keywords: Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD), Intrinsic Mode Function(IMF), Drought&lt;/p&gt;

scholarly journals Gearbox Fault Diagnosis Using Complementary Ensemble Empirical Mode Decomposition and Permutation Entropy

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Liye Zhao ◽  
Wei Yu ◽  
Ruqiang Yan
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Correlation Coefficients ◽  
Ensemble Empirical Mode Decomposition ◽  
Permutation Entropy ◽  
Support Vector ◽  
Svm Classifier ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition

This paper presents an improved gearbox fault diagnosis approach by integrating complementary ensemble empirical mode decomposition (CEEMD) with permutation entropy (PE). The presented approach identifies faults appearing in a gearbox system based on PE values calculated from selected intrinsic mode functions (IMFs) of vibration signals decomposed by CEEMD. Specifically, CEEMD is first used to decompose vibration signals characterizing various defect severities into a series of IMFs. Then, filtered vibration signals are obtained from appropriate selection of IMFs, and correlation coefficients between the filtered signal and each IMF are used as the basis for useful IMFs selection. Subsequently, PE values of those selected IMFs are utilized as input features to a support vector machine (SVM) classifier for characterizing the defect severity of a gearbox. Case study conducted on a gearbox system indicates the effectiveness of the proposed approach for identifying the gearbox faults.

Adaptive Ultrasound Tissue Harmonic Imaging Based on an Improved Ensemble Empirical Mode Decomposition Algorithm

2020 ◽  
Vol 42 (2) ◽  
pp. 57-73
Author(s):  
Suya Han ◽  
Yufeng Zhang ◽  
Keyan Wu ◽  
Bingbing He ◽  
Kexin Zhang ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Second Harmonic ◽  
Ensemble Empirical Mode Decomposition ◽  
Harmonic Imaging ◽  
Motion Artifacts ◽  
Intrinsic Mode Functions ◽  
Tissue Harmonic Imaging ◽  
Mode Decomposition ◽  
Adaptive Noise ◽  
Harmonic Components

Complete and accurate separation of harmonic components from the ultrasonic radio frequency (RF) echo signals is essential to improve the quality of harmonic imaging. There are limitations in the existing two commonly used separation methods, that is, the subjectivity for the high-pass filtering (S_HPF) method and motion artifacts for the pulse inversion (S_PI) method. A novel separation method called S_CEEMDAN, based on the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) algorithm, is proposed to adaptively separate the second harmonic components for ultrasound tissue harmonic imaging. First, the ensemble size of the CEEMDAN algorithm is calculated adaptively according to the standard deviation of the added white noise. A set of intrinsic mode functions (IMFs) is then obtained by the CEEMDAN algorithm from the ultrasonic RF echo signals. According to the IMF spectra, the IMFs that contain both fundamental and harmonic components are further decomposed. The separation process is performed until all the obtained IMFs have been divided into either fundamental or harmonic categories. Finally, the fundamental and harmonic RF echo signals are obtained from the accumulations of signals from these two categories, respectively. In simulation experiments based on CREANUIS, the S_CEEMDAN-based results are similar to the S_HPF-based results, but better than the S_PI-based results. For the dynamic carotid artery measurements, the contrasts, contrast-to-noise ratios (CNRs), and tissue-to-clutter ratios (TCRs) of the harmonic images based on the S_CEEMDAN are averagely increased by 31.43% and 50.82%, 18.96% and 10.83%, as well as 34.23% and 44.18%, respectively, compared with those based on the S_HPF and S_PI methods. In conclusion, the S_CEEMDAN method provides improved harmonic images owing to its good adaptivity and lower motion artifacts, and is thus a potential alternative to the current methods for ultrasonic harmonic imaging.

A fault diagnosis method of rolling element bearings based on CEEMDAN

2015 ◽  
Vol 231 (10) ◽  
pp. 1804-1815 ◽  
Author(s):  
Yaguo Lei ◽  
Zongyao Liu ◽  
Julien Ouazri ◽  
Jing Lin
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Rolling Element Bearings ◽  
Intrinsic Mode Functions ◽  
Residual Noise ◽  
Mode Decomposition ◽  
Rolling Element ◽  
Noisy Signals ◽  
Diagnosis Method

Ensemble empirical mode decomposition (EEMD) represents a valuable aid in empirical mode decomposition (EMD) and has been widely used in fault diagnosis of rolling element bearings. However, the intrinsic mode functions (IMFs) generated by EEMD often contain residual noise. In addition, adding different white Gaussian noise to the signal to be analyzed probably produces a different number of IMFs, and different number of IMFs makes difficult the averaging. To alleviate these two drawbacks, complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) was previously presented. Utilizing the advantages of CEEMDAN in extracting weak characteristics from noisy signals, a new fault diagnosis method of rolling element bearings based on CEEMDAN is proposed. With this method, a particular noise is added at each stage and after each IMF extraction, a unique residue is computed. In this way, this method solves the problem of the final averaging and obtains IMFs with less noise. A simulated signal is used to illustrate the effectiveness of the proposed method, and the decomposition results show that the method obtains more accurate IMFs than the EEMD. To further demonstrate the proposed method, it is applied to fault diagnosis of locomotive rolling element bearings. The diagnosis results prove that the method based on CEEMDAN may reveal the fault characteristic information of rolling element bearings better.

Applications of variational mode decomposition in seismic time-frequency analysis

Geophysics ◽  
2016 ◽  
Vol 81 (5) ◽  
pp. V365-V378 ◽  
Author(s):  
Wei Liu ◽  
Siyuan Cao ◽  
Yangkang Chen
Keyword(s):  
Empirical Mode Decomposition ◽  
Frequency Analysis ◽  
Synthetic Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Variational Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Decomposition Approach ◽  
Time Frequency Analysis ◽  
Time Frequency ◽  
Mode Decomposition

We have introduced a novel time-frequency decomposition approach for analyzing seismic data. This method is inspired by the newly developed variational mode decomposition (VMD). The principle of VMD is to look for an ensemble of modes with their respective center frequencies, such that the modes collectively reproduce the input signal and each mode is smooth after demodulation into baseband. The advantage of VMD is that there is no residual noise in the modes and it can further decrease redundant modes compared with the complete ensemble empirical mode decomposition (CEEMD) and improved CEEMD (ICEEMD). Moreover, VMD is an adaptive signal decomposition technique, which can nonrecursively decompose a multicomponent signal into several quasi-orthogonal intrinsic mode functions. This new tool, in contrast to empirical mode decomposition (EMD) and its variations, such as EEMD, CEEMD, and ICEEMD, is based on a solid mathematical foundation and can obtain a time-frequency representation that is less sensitive to noise. Two tests on synthetic data showed the effectiveness of our VMD-based time-frequency analysis method. Application on field data showed the potential of the proposed approach in highlighting geologic characteristics and stratigraphic information effectively. All the performances of the VMD-based approach were compared with those from the CEEMD- and ICEEMD-based approaches.

Research on Feature Extraction for Ultrasonic Echo Signal Based on EEMD Approach

2013 ◽  
Vol 321-324 ◽  
pp. 1311-1316 ◽  
Author(s):  
Jian Ming Yu ◽  
Ze Zhang
Keyword(s):  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Thin Plates ◽  
Echo Signal ◽  
Stationary Characteristic ◽  
Bonding Quality ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Ultrasonic Echo

The bonding quality of composite materials have a critical influence on the quality of the product in modern industry, while the current technology can only make judgments on bonding and de-bonding instead of quantitative evaluation of different de-bonding degrees. We present HHT method to extract features of echo signals used for quantitative recognition of bonding quality of thin plates. For the non-stationary characteristic of the ultrasonic echo signal, empirical mode decomposition(EMD) and ensemble empirical mode decomposition(EEMD) are put forward to decompose the signal and calculate its energy torque. The HHT method highlights the time-frequency performance of echo signals effectively. The simulated signals verify that EEMD has more excellent decomposition performance than EMD, that is, EEMD diminishes the mode mixing to some extent generated from EMD decomposition.

Sign in / Sign up

Export Citation Format

Share Document