scholarly journals A Fast Approach to Removing Muscle Artifacts for EEG with Signal Serialization Based Ensemble Empirical Mode Decomposition

Entropy ◽  
2021 ◽  
Vol 23 (9) ◽  
pp. 1170
Author(s):  
Yangyang Dai ◽  
Feng Duan ◽  
Fan Feng ◽  
Zhe Sun ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Real Time ◽  
Empirical Mode Decomposition ◽  
Mean Squared Error ◽  
Simulated Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Eeg Signals ◽  
Mode Decomposition ◽  
Significant Difference ◽  
The Brain

An electroencephalogram (EEG) is an electrophysiological signal reflecting the functional state of the brain. As the control signal of the brain–computer interface (BCI), EEG may build a bridge between humans and computers to improve the life quality for patients with movement disorders. The collected EEG signals are extremely susceptible to the contamination of electromyography (EMG) artifacts, affecting their original characteristics. Therefore, EEG denoising is an essential preprocessing step in any BCI system. Previous studies have confirmed that the combination of ensemble empirical mode decomposition (EEMD) and canonical correlation analysis (CCA) can effectively suppress EMG artifacts. However, the time-consuming iterative process of EEMD may limit the application of the EEMD-CCA method in real-time monitoring of BCI. Compared with the existing EEMD, the recently proposed signal serialization based EEMD (sEEMD) is a good choice to provide effective signal analysis and fast mode decomposition. In this study, an EMG denoising method based on sEEMD and CCA is discussed. All of the analyses are carried out on semi-simulated data. The results show that, in terms of frequency and amplitude, the intrinsic mode functions (IMFs) decomposed by sEEMD are consistent with the IMFs obtained by EEMD. There is no significant difference in the ability to separate EMG artifacts from EEG signals between the sEEMD-CCA method and the EEMD-CCA method (p > 0.05). Even in the case of heavy contamination (signal-to-noise ratio is less than 2 dB), the relative root mean squared error is about 0.3, and the average correlation coefficient remains above 0.9. The running speed of the sEEMD-CCA method to remove EMG artifacts is significantly improved in comparison with that of EEMD-CCA method (p < 0.05). The running time of the sEEMD-CCA method for three lengths of semi-simulated data is shortened by more than 50%. This indicates that sEEMD-CCA is a promising tool for EMG artifact removal in real-time BCI systems.

A Method of Real-Time Tsunami Detection Using Ensemble Empirical Mode Decomposition

2020 ◽  
Vol 91 (5) ◽  
pp. 2851-2861
Author(s):  
Yuchen Wang ◽  
Kenji Satake ◽  
Takuto Maeda ◽  
Masanao Shinohara ◽  
Shin’ichi Sakai
Keyword(s):  
Real Time ◽  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Detection Methods ◽  
Ocean Bottom ◽  
Intrinsic Mode Functions ◽  
The 2011 Tohoku Earthquake ◽  
Tsunami Early Warning ◽  
Tsunami Detection ◽  
Mode Decomposition

Abstract We propose a method of real-time tsunami detection using ensemble empirical mode decomposition (EEMD). EEMD decomposes the time series into a set of intrinsic mode functions adaptively. The tsunami signals of ocean-bottom pressure gauges (OBPGs) are automatically separated from the tidal signals, seismic signals, as well as background noise. Unlike the traditional tsunami detection methods, our algorithm does not need to make a prediction of tides. The application to the actual data of cabled OBPGs off the Tokohu coast shows that it successfully detects the tsunami from the 2016 Fukushima earthquake (M 7.4). The method was also applied to the extremely large tsunami from the 2011 Tohoku earthquake (M 9.0) and extremely small tsunami from the 1998 Sanriku earthquake (M 6.4). The algorithm detected the former huge tsunami that caused devastating damage, whereas it did not detect the latter microtsunami, which was not noticed on the coast. The algorithm was also tested for month-long OBPG data and caused no false alarm. Therefore, the algorithm is very useful for a tsunami early warning system, as it does not require any earthquake information to detect the tsunamis. It detects the tsunami with a short-time delay and characterizes the tsunami amplitudes accurately.

scholarly journals A Novel Method Based on Combination of Independent Component Analysis and Ensemble Empirical Mode Decomposition for Removing Electrooculogram Artifacts From Multichannel Electroencephalogram Signals

2021 ◽  
Vol 15 ◽  
Author(s):  
Chao-Lin Teng ◽  
Yi-Yang Zhang ◽  
Wei Wang ◽  
Yuan-Yuan Luo ◽  
Gang Wang ◽  
...  
Keyword(s):  
Independent Component Analysis ◽  
Empirical Mode Decomposition ◽  
High Performance ◽  
Component Analysis ◽  
Ensemble Empirical Mode Decomposition ◽  
Independent Component ◽  
Intrinsic Mode Functions ◽  
Eeg Signals ◽  
Mode Decomposition ◽  
Multichannel Eeg

Electrooculogram (EOG) is one of common artifacts in recorded electroencephalogram (EEG) signals. Many existing methods including independent component analysis (ICA) and wavelet transform were applied to eliminate EOG artifacts but ignored the possible impact of the nature of EEG signal. Therefore, the removal of EOG artifacts still faces a major challenge in EEG research. In this paper, the ensemble empirical mode decomposition (EEMD) and ICA algorithms were combined to propose a novel EEMD-based ICA method (EICA) for removing EOG artifacts from multichannel EEG signals. First, the ICA method was used to decompose original EEG signals into multiple independent components (ICs), and the EOG-related ICs were automatically identified through the kurtosis method. Then, by performing the EEMD algorithm on EOG-related ICs, the intrinsic mode functions (IMFs) linked to EOG were discriminated and eliminated. Finally, artifact-free IMFs were projected to obtain the ICs without EOG artifacts, and the clean EEG signals were ultimately reconstructed by the inversion of ICA. Both EOGs correction from simulated EEG signals and real EEG data were studied, which verified that the proposed method could achieve an improved performance in EOG artifacts rejection. By comparing with other existing approaches, the EICA obtained the optimal performance with the highest increase in signal-to-noise ratio and decrease in root mean square error and correlation coefficient after EOG artifacts removal, which demonstrated that the proposed method could more effectively eliminate blink artifacts from multichannel EEG signals with less error influence. This study provided a novel promising method to eliminate EOG artifacts with high performance, which is of great importance for EEG signals processing and analysis.

scholarly journals Discrimination between Ictal and Seizure-Free EEG Signals Using Empirical Mode Decomposition

2008 ◽  
Vol 2008 ◽  
pp. 1-5 ◽  
Author(s):  
Ram Bilas Pachori
Keyword(s):  
Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Eeg Signals ◽  
Intracranial Eeg ◽  
Mode Decomposition ◽  
Significant Difference ◽  
Finite Set ◽  
The Difference ◽  
Band Limited ◽  
Electroencephalogram Eeg

A new method for analysis of electroencephalogram (EEG) signals using empirical mode decomposition (EMD) and Fourier-Bessel (FB) expansion has been presented in this paper. The EMD decomposes an EEG signal into a finite set of band-limited signals termed intrinsic mode functions (IMFs). The mean frequency (MF) for each IMF has been computed using FB expansion. The MF measure of the IMFs has been used as a feature in order to identify the difference between ictal and seizure-free intracranial EEG signals. It has been shown that the MF feature of the IMFs has provided statistically significant difference between ictal and seizure-free EEG signals. Simulation results are included to illustrate the effectiveness of the proposed method.

scholarly journals Detecting Epileptic Seizures in EEG Signals with Complementary Ensemble Empirical Mode Decomposition and Extreme Gradient Boosting

Entropy ◽  
2020 ◽  
Vol 22 (2) ◽  
pp. 140 ◽  
Author(s):  
Jiang Wu ◽  
Tengfei Zhou ◽  
Taiyong Li
Keyword(s):  
Empirical Mode Decomposition ◽  
Epileptic Seizures ◽  
Ensemble Empirical Mode Decomposition ◽  
Gradient Boosting ◽  
Massachusetts Institute Of Technology ◽  
Intrinsic Mode Functions ◽  
Eeg Signals ◽  
End Effects ◽  
Mode Decomposition ◽  
Extreme Gradient Boosting

Epilepsy is a common nervous system disease that is characterized by recurrent seizures. An electroencephalogram (EEG) records neural activity, and it is commonly used for the diagnosis of epilepsy. To achieve accurate detection of epileptic seizures, an automatic detection approach of epileptic seizures, integrating complementary ensemble empirical mode decomposition (CEEMD) and extreme gradient boosting (XGBoost), named CEEMD-XGBoost, is proposed. Firstly, the decomposition method, CEEMD, which is capable of effectively reducing the influence of mode mixing and end effects, was utilized to divide raw EEG signals into a set of intrinsic mode functions (IMFs) and residues. Secondly, the multi-domain features were extracted from raw signals and the decomposed components, and they were further selected according to the importance scores of the extracted features. Finally, XGBoost was applied to develop the epileptic seizure detection model. Experiments were conducted on two benchmark epilepsy EEG datasets, named the Bonn dataset and the CHB-MIT (Children’s Hospital Boston and Massachusetts Institute of Technology) dataset, to evaluate the performance of our proposed CEEMD-XGBoost. The extensive experimental results indicated that, compared with some previous EEG classification models, CEEMD-XGBoost can significantly enhance the detection performance of epileptic seizures in terms of sensitivity, specificity, and accuracy.

scholarly journals Cardiopulmonary Resuscitation Pattern Evaluation Based on Ensemble Empirical Mode Decomposition Filter via Nonlinear Approaches

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Muammar Sadrawi ◽  
Wei-Zen Sun ◽  
Matthew Huei-Ming Ma ◽  
Chun-Yi Dai ◽  
Maysam F. Abbod ◽  
...  
Keyword(s):  
Survival Rate ◽  
Cardiopulmonary Resuscitation ◽  
Empirical Mode Decomposition ◽  
Nonlinear Approximation ◽  
Ensemble Empirical Mode Decomposition ◽  
Ecg Signal ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Significant Difference

Good quality cardiopulmonary resuscitation (CPR) is the mainstay of treatment for managing patients with out-of-hospital cardiac arrest (OHCA). Assessment of the quality of the CPR delivered is now possible through the electrocardiography (ECG) signal that can be collected by an automated external defibrillator (AED). This study evaluates a nonlinear approximation of the CPR given to the asystole patients. The raw ECG signal is filtered using ensemble empirical mode decomposition (EEMD), and the CPR-related intrinsic mode functions (IMF) are chosen to be evaluated. In addition, sample entropy (SE), complexity index (CI), and detrended fluctuation algorithm (DFA) are collated and statistical analysis is performed using ANOVA. The primary outcome measure assessed is the patient survival rate after two hours. CPR pattern of 951 asystole patients was analyzed for quality of CPR delivered. There was no significant difference observed in the CPR-related IMFs peak-to-peak interval analysis for patients who are younger or older than 60 years of age, similarly to the amplitude difference evaluation for SE and DFA. However, there is a difference noted for the CI (p<0.05). The results show that patients group younger than 60 years have higher survival rate with high complexity of the CPR-IMFs amplitude differences.

Ensemble Empirical Mode Decomposition Based Deep Learning Model for Short-Term Wind Power Forecasting

2022 ◽  
Author(s):  
J.M. González-Sopeña
Keyword(s):  
Deep Learning ◽  
Wind Power ◽  
Empirical Mode Decomposition ◽  
Time Series Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Series Data ◽  
Intrinsic Mode Functions ◽  
Wind Power Forecasting ◽  
Mode Decomposition ◽  
Power Forecasting

Abstract. In the last few years, wind power forecasting has established itself as an essential tool in the energy industry due to the increase of wind power penetration in the electric grid. This paper presents a wind power forecasting method based on ensemble empirical mode decomposition (EEMD) and deep learning. EEMD is employed to decompose wind power time series data into several intrinsic mode functions and a residual component. Afterwards, every intrinsic mode function is trained by means of a CNN-LSTM architecture. Finally, wind power forecast is obtained by adding the prediction of every component. Compared to the benchmark model, the proposed approach provides more accurate predictions for several time horizons. Furthermore, prediction intervals are modelled using quantile regression.

Spatiotemporal Trend and Variability of Precipitation in Taiwan Based on Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD)

2021 ◽  
Author(s):  
Chun-Hsiang Tang ◽  
Christina W. Tsai
Keyword(s):  
Time Series ◽  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Short Term ◽  
Time Frequency ◽  
Spatial Locality ◽  
Temperature And Precipitation ◽  
Mode Decomposition ◽  
Climatic Scenarios

&lt;p&gt;Abstract&lt;/p&gt;&lt;p&gt;Most of the time series in nature are nonlinear and nonstationary affected by climate change particularly. It is inevitable that Taiwan has also experienced frequent drought events in recent years. However, drought events are natural disasters with no clear warnings and their influences are cumulative. The difficulty of detecting and analyzing the drought phenomenon remains. To deal with the above-mentioned problem, Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD) is introduced to analyze the temperature and rainfall data from 1975~2018 in this study, which is a powerful method developed for the time-frequency analysis of nonlinear, nonstationary time series. This method can not only analyze the spatial locality and temporal locality of signals but also decompose the multiple-dimensional time series into several Intrinsic Mode Functions (IMFs). By the set of IMFs, the meaningful instantaneous frequency and the trend of the signals can be observed. Considering stochastic and deterministic influences, to enhance the accuracy this study also reconstruct IMFs into two components, stochastic and deterministic, by the coefficient of auto-correlation.&lt;/p&gt;&lt;p&gt;In this study, the influences of temperature and precipitation on the drought events will be discussed. Furthermore, to decrease the significant impact of drought events, this study also attempts to forecast the occurrences of drought events in the short-term via the Artificial Neural Network technique. And, based on the CMIP5 model, this study also investigates the trend and variability of drought events and warming in different climatic scenarios.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;Keywords: Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD), Intrinsic Mode Function(IMF), Drought&lt;/p&gt;

scholarly journals Gearbox Fault Diagnosis Using Complementary Ensemble Empirical Mode Decomposition and Permutation Entropy

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Liye Zhao ◽  
Wei Yu ◽  
Ruqiang Yan
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Correlation Coefficients ◽  
Ensemble Empirical Mode Decomposition ◽  
Permutation Entropy ◽  
Support Vector ◽  
Svm Classifier ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition

This paper presents an improved gearbox fault diagnosis approach by integrating complementary ensemble empirical mode decomposition (CEEMD) with permutation entropy (PE). The presented approach identifies faults appearing in a gearbox system based on PE values calculated from selected intrinsic mode functions (IMFs) of vibration signals decomposed by CEEMD. Specifically, CEEMD is first used to decompose vibration signals characterizing various defect severities into a series of IMFs. Then, filtered vibration signals are obtained from appropriate selection of IMFs, and correlation coefficients between the filtered signal and each IMF are used as the basis for useful IMFs selection. Subsequently, PE values of those selected IMFs are utilized as input features to a support vector machine (SVM) classifier for characterizing the defect severity of a gearbox. Case study conducted on a gearbox system indicates the effectiveness of the proposed approach for identifying the gearbox faults.

Adaptive Ultrasound Tissue Harmonic Imaging Based on an Improved Ensemble Empirical Mode Decomposition Algorithm

2020 ◽  
Vol 42 (2) ◽  
pp. 57-73
Author(s):  
Suya Han ◽  
Yufeng Zhang ◽  
Keyan Wu ◽  
Bingbing He ◽  
Kexin Zhang ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Second Harmonic ◽  
Ensemble Empirical Mode Decomposition ◽  
Harmonic Imaging ◽  
Motion Artifacts ◽  
Intrinsic Mode Functions ◽  
Tissue Harmonic Imaging ◽  
Mode Decomposition ◽  
Adaptive Noise ◽  
Harmonic Components

Complete and accurate separation of harmonic components from the ultrasonic radio frequency (RF) echo signals is essential to improve the quality of harmonic imaging. There are limitations in the existing two commonly used separation methods, that is, the subjectivity for the high-pass filtering (S_HPF) method and motion artifacts for the pulse inversion (S_PI) method. A novel separation method called S_CEEMDAN, based on the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) algorithm, is proposed to adaptively separate the second harmonic components for ultrasound tissue harmonic imaging. First, the ensemble size of the CEEMDAN algorithm is calculated adaptively according to the standard deviation of the added white noise. A set of intrinsic mode functions (IMFs) is then obtained by the CEEMDAN algorithm from the ultrasonic RF echo signals. According to the IMF spectra, the IMFs that contain both fundamental and harmonic components are further decomposed. The separation process is performed until all the obtained IMFs have been divided into either fundamental or harmonic categories. Finally, the fundamental and harmonic RF echo signals are obtained from the accumulations of signals from these two categories, respectively. In simulation experiments based on CREANUIS, the S_CEEMDAN-based results are similar to the S_HPF-based results, but better than the S_PI-based results. For the dynamic carotid artery measurements, the contrasts, contrast-to-noise ratios (CNRs), and tissue-to-clutter ratios (TCRs) of the harmonic images based on the S_CEEMDAN are averagely increased by 31.43% and 50.82%, 18.96% and 10.83%, as well as 34.23% and 44.18%, respectively, compared with those based on the S_HPF and S_PI methods. In conclusion, the S_CEEMDAN method provides improved harmonic images owing to its good adaptivity and lower motion artifacts, and is thus a potential alternative to the current methods for ultrasonic harmonic imaging.

A fault diagnosis method of rolling element bearings based on CEEMDAN

2015 ◽  
Vol 231 (10) ◽  
pp. 1804-1815 ◽  
Author(s):  
Yaguo Lei ◽  
Zongyao Liu ◽  
Julien Ouazri ◽  
Jing Lin
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Rolling Element Bearings ◽  
Intrinsic Mode Functions ◽  
Residual Noise ◽  
Mode Decomposition ◽  
Rolling Element ◽  
Noisy Signals ◽  
Diagnosis Method

Ensemble empirical mode decomposition (EEMD) represents a valuable aid in empirical mode decomposition (EMD) and has been widely used in fault diagnosis of rolling element bearings. However, the intrinsic mode functions (IMFs) generated by EEMD often contain residual noise. In addition, adding different white Gaussian noise to the signal to be analyzed probably produces a different number of IMFs, and different number of IMFs makes difficult the averaging. To alleviate these two drawbacks, complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) was previously presented. Utilizing the advantages of CEEMDAN in extracting weak characteristics from noisy signals, a new fault diagnosis method of rolling element bearings based on CEEMDAN is proposed. With this method, a particular noise is added at each stage and after each IMF extraction, a unique residue is computed. In this way, this method solves the problem of the final averaging and obtains IMFs with less noise. A simulated signal is used to illustrate the effectiveness of the proposed method, and the decomposition results show that the method obtains more accurate IMFs than the EEMD. To further demonstrate the proposed method, it is applied to fault diagnosis of locomotive rolling element bearings. The diagnosis results prove that the method based on CEEMDAN may reveal the fault characteristic information of rolling element bearings better.

Sign in / Sign up

Export Citation Format

Share Document