scholarly journals Colorimetric Analysis Using Scene-Adaptive Color Conversion Matrix of Calibrated CIS

2016 ◽  
Vol 2016 ◽  
pp. 1-7
Author(s):  
Sung-Hak Lee

TheRGBsignals of different CISs (color image sensors) do not register the same values for the same viewing scene owing to their different spectral sensitivity and white balance mechanisms. Thus, CISs must be characterized based on CIE standard observation for colorimetric purposes. One general method for characterizing CISs is least square polynomial modeling to derive the colorimetric transfer matrix betweenRGBoutputs and CIEXYZtristimulus inputs. However, the transfer matrix that is obtained under the standard CIE illumination is unable to estimate various conditions of a CIS that is operated under various illuminations with varying chromaticity and luminance. Therefore, repeated experiments are necessary to obtain accurate colorimetric analysis results. This paper presents a scene-adaptive colorimetric analysis method using images captured by a general consumer camera under various environments.

Nanoscale ◽  
2021 ◽  
Author(s):  
Mingjie Chen ◽  
Long Wen ◽  
Dahui Pan ◽  
David Cumming ◽  
Xianguang Yang ◽  
...  

Pixel scaling effects have been a major issue for the development of high-resolution color image sensors due to the reduced photoelectric signal and the color crosstalk. Various structural color techniques...


2011 ◽  
Vol 50 (4) ◽  
pp. 042201 ◽  
Author(s):  
Yuta Suzuki ◽  
Yasuyuki Ozeki ◽  
Tomoki Yoshino ◽  
Kazuhiro Yamada ◽  
Michihiro Yamagata ◽  
...  

Author(s):  
L.J. D'Luna ◽  
K.A. Parulski ◽  
T.J. Kenney ◽  
R.H. Hibbard ◽  
R.M. Guidash ◽  
...  

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4697 ◽  
Author(s):  
Yeahwon Kim ◽  
Hohyung Ryu ◽  
Sunmi Lee ◽  
Yeon Ju Lee

Nowadays, the sizes of pixel sensors in digital cameras are decreasing as the resolution of the image sensor increases. Due to the decreased size, the pixel sensors receive less light energy, which makes it more sensitive to thermal noise. Even a small amount of noise in the color filter array (CFA) can have a significant effect on the reconstruction of the color image, as two-thirds of the missing data would have to be reconstructed from noisy data; because of this, direct denoising would need to be performed on the raw CFA to obtain a high-resolution color image. In this paper, we propose an interchannel nonlocal weighted moving least square method for the noise removal of the raw CFA. The proposed method is our first attempt of applying a two dimensional (2-D) polynomial approximation to denoising the CFA. Previous works make use of 2-D linear or directional 1-D polynomial approximations. The reason that 2-D polynomial approximation methods have not been applied to this problem is the difficulty of the weight control in the 2-D polynomial approximation method, as a small amount of noise can have a large effect on the approximated 2-D shape. This makes CFA denoising more important, as the approximated 2-D shape has to be reconstructed from only one-third of the original data. To address this problem, we propose a method that reconstructs the approximated 2-D shapes corresponding to the RGB color channels based on the measure of the similarities of the patches directly on the CFA. By doing so, the interchannel information is incorporated into the denoising scheme, which results in a well-controlled and higher order of polynomial approximation of the color channels. Compared to other nonlocal-mean-based denoising methods, the proposed method uses an extra reproducing constraint, which guarantees a certain degree of the approximation order; therefore, the proposed method can reduce the number of false reconstruction artifacts that often occur in nonlocal-mean-based denoising methods. Experimental results demonstrate the performance of the proposed algorithm.


2011 ◽  
Vol 181-182 ◽  
pp. 124-129
Author(s):  
Yu Song

Adopting improved variable oblivion factor least square arithmetic to real-time amend Kalman’s state transfer matrix, we put Maple Dam reservoir flood forecast real-time adjustment for example, then apply and compare with other ways. The result shows this arithmetic is preferable.


Author(s):  
Jintao He ◽  
Dengkai Chen ◽  
Suihuai Yu

With the improvement of people's quality of life and the love for various national cultures, the conventional product color design created by industrial designers combining their own knowledge, experience and other individual knowledge is not enough to meet the aesthetic needs of consumers to obtain cultural attributes. Compared with conventional product color design, the effective communication of cultural images is the core of cultural creative product color design. In this paper, for the purpose of expressing multicultural images of color design of cultural creative products, we propose a coupling and correlation analysis method of color beauty and visual beauty, and study the mapping relationship between color beauty and visual beauty on color image based on least square regression analysis. The mapping relationship is used to obtain the key parameters that affect the dynamic changes of color images. Finally, a quantitative model of product color dynamic reconciliation is established, and a product color design and evaluation method based on cultural image constraints is proposed. Based on the above method research, the color design of the ultraviolet lamp is used as an example to verify the effectiveness of the proposed method.


2021 ◽  
Author(s):  
Thaibao Phan ◽  
Evan Wang ◽  
Jonathan A. Fan

2016 ◽  
Vol 8 (10) ◽  
pp. 6718-6726 ◽  
Author(s):  
Keng-Te Lin ◽  
Hsuen-Li Chen ◽  
Yu-Sheng Lai ◽  
Yi-Min Chi ◽  
Ting-Wei Chu

Sign in / Sign up

Export Citation Format

Share Document