scholarly journals Comparison of 3DVar and EnSRF Data Assimilation Using Radar Observations for the Analysis and Prediction of an MCS

2018 ◽  
Vol 2018 ◽  
pp. 1-18 ◽  
Author(s):  
Shibo Gao ◽  
Jinzhong Min
Keyword(s):  
Data Assimilation ◽  
Three Dimensional ◽  
Mesoscale Convective System ◽  
Final Analysis ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Precipitation Forecast ◽  
Convective System ◽  
Wind Fields ◽  
Radar Observations

Using radar observations, the performances of the ensemble square root filter (EnSRF) and an indirect three-dimensional variational (3DVar) data assimilation method were compared for a mesoscale convective system (MCS) that occurred in the Front Range of the Rocky Mountains, Colorado (USA). The results showed that the root mean square innovations (RMSIs) of EnSRF were lower than 3DVar for radar reflectivity and radial velocity and that the spread of EnSRF was generally consistent with its RMSIs. EnSRF substantially improved the analysis of the MCS compared with an experiment without radar data assimilation, and it produced a slight but noticeable improvement over 3DVar in terms of both coverage and intensity. Forecast results initiated from the final analysis revealed that EnSRF generally produced the best prediction of the MCS, with improved quantitative reflectivity and precipitation forecast skills. EnSRF also demonstrated better performance than 3DVar in the prediction of neighborhood probability for reflectivity at thresholds of 20 and 35 dBZ, which better matched the observed radar reflectivity in terms of both shape and extension. Additionally, the humidity, temperature, and wind fields were also improved by EnSRF; the largest error reduction was found in the water vapor field near the surface and at upper levels.

Evaluating Forecast Performance and Sensitivity to the GSI EnKF Data Assimilation Configuration for the 28 – 29 May 2017 Mesoscale Convective System Case

2020 ◽  
Author(s):  
Jonathan Labriola ◽  
Youngsun Jung ◽  
Chengsi Liu ◽  
Ming Xue
Keyword(s):  
Data Assimilation ◽  
Forecast Error ◽  
Mesoscale Convective System ◽  
Radar Data ◽  
Forecast Skill ◽  
Convective System ◽  
Observation Error ◽  
Forecast Performance ◽  
Radar Observations ◽  
Data Thinning

AbstractIn an effort to improve radar data assimilation configurations for potential operational implementation, GSI EnKF data assimilation experiments based on the operational system employed by the Center for Analysis and Prediction of Storms (CAPS) realtime Spring Forecast Experiments are performed. These experiments are followed by 6-hour forecasts for an MCS on 28 – 29 May 2017. Configurations examined include data thinning, covariance localization radii and inflation, observation error settings, and data assimilation frequency for radar observations.The results show experiments that assimilate radar observations more frequently (i.e., 5 – 10 minutes) are initially better at suppressing spurious convection. However, assimilating observations every 5 minutes causes spurious convection to become more widespread with time, and modestly degrades forecast skill through the remainder of the forecast window. Ensembles that assimilate more observations with less thinning of data or use a larger horizontal covariance localization radius for radar data predict fewer spurious storms and better predict the location of observed storms. Optimized data thinning and horizontal covariance localization radii have positive impacts on forecast skill during the first forecast hour that are quickly lost due to the growth of forecast error. Forecast skill is less sensitive to the ensemble spread inflation factors and observation errors tested during this study. These results provide guidance towards optimizing the configuration of the GSI EnKF system. Among DA the configurations tested, the one employed by the CAPS Spring Forecast Experiment produces the most skilled forecasts while remaining computationally efficient for realtime use.

scholarly journals Multiscale EnKF Assimilation of Radar and Conventional Observations and Ensemble Forecasting for a Tornadic Mesoscale Convective System

2015 ◽  
Vol 143 (4) ◽  
pp. 1035-1057 ◽  
Author(s):  
Nathan Snook ◽  
Ming Xue ◽  
Youngsun Jung
Keyword(s):  
Surface Wind ◽  
Mesoscale Convective System ◽  
Radar Data ◽  
Precipitation Forecast ◽  
Lateral Boundary Condition ◽  
Convective System ◽  
Near Surface ◽  
Radar Observations ◽  
Probabilistic Forecasts ◽  
Mesoscale Convective

Abstract In recent studies, the authors have successfully demonstrated the ability of an ensemble Kalman filter (EnKF), assimilating real radar observations, to produce skillful analyses and subsequent ensemble-based probabilistic forecasts for a tornadic mesoscale convective system (MCS) that occurred over Oklahoma and Texas on 9 May 2007. The current study expands upon this prior work, performing experiments for this case on a larger domain using a nested-grid EnKF, which accounts for mesoscale uncertainties through the initial ensemble and lateral boundary condition perturbations. In these new experiments, conventional observations (including surface, wind profiler, and upper-air observations) are assimilated in addition to the WSR-88D and the Center for Collaborative Adaptive Sensing of the Atmosphere (CASA) radar data used in the previous studies, better representing meso- and convective-scale features. The relative impacts of conventional and radar data on analyses and forecasts are examined, and biases within the ensemble are investigated. The new experiments produce a substantially improved forecast, including better representation of the convective lines of the MCS. Assimilation of radar data substantially improves the ensemble precipitation forecast. Assimilation of conventional data together with radar observations substantially improves the forecast of near-surface mesovortices within the MCS, improves forecasts of surface temperature and dewpoint, and imparts a slight but noticeable improvement to short-term precipitation forecasts. Furthermore, ensemble analyses and forecasts are found to be sensitive to the localization radius applied to conventional data within the EnKF.

Ensemble Probabilistic Forecasts of a Tornadic Mesoscale Convective System from Ensemble Kalman Filter Analyses Using WSR-88D and CASA Radar Data

2012 ◽  
Vol 140 (7) ◽  
pp. 2126-2146 ◽  
Author(s):  
Nathan Snook ◽  
Ming Xue ◽  
Youngsun Jung
Keyword(s):  
Kalman Filter ◽  
Data Assimilation ◽  
Ensemble Kalman Filter ◽  
Mesoscale Convective System ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Convective System ◽  
Ensemble Forecasts ◽  
Probabilistic Forecasts ◽  
Mesoscale Convective

Abstract This study examines the ability of a storm-scale numerical weather prediction (NWP) model to predict precipitation and mesovortices within a tornadic mesoscale convective system that occurred over Oklahoma on 8–9 May 2007, when the model is initialized from ensemble Kalman filter (EnKF) analyses including data from four Engineering Research Center for Collaborative Adaptive Sensing of the Atmosphere (CASA) X-band and five Weather Surveillance Radar-1988 Doppler (WSR-88D) S-band radars. Ensemble forecasts are performed and probabilistic forecast products generated, focusing on prediction of radar reflectivity (a proxy of quantitative precipitation) and mesovortices (an indication of tornado potential). Assimilating data from both the CASA and WSR-88D radars for the ensemble and using a mixed-microphysics ensemble during data assimilation produces the best probabilistic mesovortex forecast. The use of multiple microphysics schemes within the ensemble aims to address at least partially the model physics uncertainty and effectively plays a role of flow-dependent inflation (in precipitation regions) during EnKF data assimilation. The ensemble predicts with high probability (approximately 0.65) the near-surface mesovortex associated with the first of three reported tornadoes. Though a bias toward stronger precipitation is noted in the ensemble forecasts, all experiments produce skillful probabilistic forecasts of radar reflectivity on a 0–3-h time scale as evaluated by multiple probabilistic verification metrics. These results suggest that both the inclusion of CASA radar data and use of a mixed-microphysics ensemble during EnKF data assimilation positively impact the skill of 2–3-h ensemble forecasts of mesovortices, despite having little impact on the quality of precipitation forecasts (analyzed in terms of predicted radar reflectivity), and are important steps toward an operational EnKF-based ensemble analysis and probabilistic forecast system to support convective-scale warn-on-forecast operations.

Indirect Assimilation of Radar Reflectivity with WRF 3D-Var and Its Impact on Prediction of Four Summertime Convective Events

2013 ◽  
Vol 52 (4) ◽  
pp. 889-902 ◽  
Author(s):  
Hongli Wang ◽  
Juanzhen Sun ◽  
Shuiyong Fan ◽  
Xiang-Yu Huang
Keyword(s):  
Water Vapor ◽  
Data Assimilation ◽  
Convective Available Potential Energy ◽  
Three Dimensional ◽  
Heavy Rain ◽  
Cloud Water ◽  
Radar Reflectivity ◽  
Precipitation Forecast ◽  
Weather Research And Forecasting ◽  
Convective System

AbstractAn indirect radar reflectivity assimilation scheme has been developed within the Weather Research and Forecasting model three-dimensional data assimilation system (WRF 3D-Var). This scheme, instead of assimilating radar reflectivity directly, assimilates retrieved rainwater and estimated in-cloud water vapor. An analysis is provided to show that the assimilation of the retrieved rainwater avoids the linearization error of the Z–qr (reflectivity–rainwater) equation. A new observation operator is introduced to assimilate the estimated in-cloud water vapor. The performance of the scheme is demonstrated by assimilating reflectivity observations into the Rapid Update Cycle data assimilation and forecast system operating at Beijing Meteorology Bureau. Four heavy-rain-producing convective cases that occurred during summer 2009 in Beijing, China, are studied using the newly developed system. Results show that on average the assimilation of reflectivity significantly improves the short-term precipitation forecast skill up to 7 h. A diagnosis of the analysis fields of one case shows that the assimilation of reflectivity increases humidity, rainwater, and convective available potential energy in the convective region. As a result, the analysis successfully promotes the developments of the convective system and thus improves the subsequent prediction of the location and intensity of precipitation for this case.

scholarly journals A radar reflectivity operator with ice-phase hydrometeors for variational data assimilation (version 1.0) and its evaluation with real radar data

2019 ◽  
Vol 12 (9) ◽  
pp. 4031-4051 ◽  
Author(s):  
Shizhang Wang ◽  
Zhiquan Liu
Keyword(s):  
Data Assimilation ◽  
Three Dimensional ◽  
Wrf Model ◽  
Radar Data ◽  
Poor Quality ◽  
Variational Data Assimilation ◽  
Radar Reflectivity ◽  
Background Error ◽  
Background Fields ◽  
Ice Phase

Abstract. A reflectivity forward operator and its associated tangent linear and adjoint operators (together named RadarVar) were developed for variational data assimilation (DA). RadarVar can analyze both rainwater and ice-phase species (snow and graupel) by directly assimilating radar reflectivity observations. The results of three-dimensional variational (3D-Var) DA experiments with a 3 km grid mesh setting of the Weather Research and Forecasting (WRF) model showed that RadarVar was effective at producing an analysis of reflectivity pattern and intensity similar to the observed data. Two to three outer loops with 50–100 iterations in each loop were needed to obtain a converged 3-D analysis of reflectivity, rainwater, snow, and graupel, including the melting layers with mixed-phase hydrometeors. It is shown that the deficiencies in the analysis using this operator, caused by the poor quality of the background fields and the use of the static background error covariance, can be partially resolved by using radar-retrieved hydrometeors in a preprocessing step and tuning the spatial correlation length scales of the background errors. The direct radar reflectivity assimilation using RadarVar also improved the short-term (2–5 h) precipitation forecasts compared to those of the experiment without DA.

Impact of Doppler radar reflectivity and velocity data assimilation on the quality of precipitation forecasting in Belarus in different seasons

2020 ◽  
Author(s):  
Palina Zaiko ◽  
Siarhei Barodka ◽  
Aliaksandr Krasouski
Keyword(s):  
Data Assimilation ◽  
Weather Radar ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Precipitation Forecast ◽  
Doppler Weather Radar ◽  
Velocity Data ◽  
Numerical Weather ◽  
Convective Processes ◽  
Different Seasons

<p>Heavy precipitation forecast remains one of the biggest problems in numerical weather prediction. Modern remote sensing systems allow tracking of rapidly developing convective processes and provide additional data for numerical weather models practically in real time. Assimilation of Doppler weather radar data also allows to specify the position and intensity of convective processes in atmospheric numerical models.</p><p>The primary objective of this study is to evaluate the impact of Doppler  radar reflectivity and velocity assimilation in the WRF-ARW mesoscale model for the territory of Belarus in different seasons of the year. Specifically, we focus on the short-range numerical forecasting of mesoscale convective systems passage over the territory of Belarus in 2017-2019 with assimilated radar data.</p><p>Proceeding with weather radar observations available for our cases, we first perform the necessary processing of the raw radar data to eliminate noise, reflections and other kinds of clutter. For identification of non-meteorological noise fuzzy echo classification was used. Then we use the WRF-DA (3D-Var) system to assimilate the processed radar observations from 3 Belarusian Doppler weather radar in the WRF model. Assimilating both radar reflectivity and radial velocity data in the model we aim to better represent not only the distribution of clouds and their moisture content, but also the detailed dynamical aspects of convective circulation. Finally, we analyze WRF modelling output obtained with assimilated radar data and compare it with available meteorological observations and with other model runs (including control runs with no data assimilation or with assimilation of conventional weather stations data only), paying special attention to the accuracy of precipitation forecast 12 hours in advance.</p>

An Approach of Radar Reflectivity Data Assimilation and Its Assessment with the Inland QPF of Typhoon Rusa (2002) at Landfall

2007 ◽  
Vol 46 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Qingnong Xiao ◽  
Ying-Hwa Kuo ◽  
Juanzhen Sun ◽  
Wen-Chau Lee ◽  
Dale M. Barker ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Doppler Radar ◽  
Mesoscale Model ◽  
Control Variable ◽  
Three Dimensional ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Mixing Ratio ◽  
Warm Rain Process ◽  
Reflectivity Data

Abstract A radar reflectivity data assimilation scheme was developed within the fifth-generation Pennsylvania State University–National Center for Atmospheric Research Mesoscale Model (MM5) three-dimensional variational data assimilation (3DVAR) system. The model total water mixing ratio was used as a control variable. A warm-rain process, its linear, and its adjoint were incorporated into the system to partition the moisture and hydrometeor increments. The observation operator for radar reflectivity was developed and incorporated into the 3DVAR. With a single reflectivity observation, the multivariate structures of the analysis increments that included cloud water and rainwater mixing ratio increments were examined. Using the onshore Doppler radar data from Jindo, South Korea, the capability of the radar reflectivity assimilation for the landfalling Typhoon Rusa (2002) was assessed. Verifications of inland quantitative precipitation forecasting (QPF) of Typhoon Rusa (2002) showed positive impacts of assimilating radar reflectivity data on the short-range QPF.

scholarly journals Case Study of a Retrieval Method of 3D Proxy Reflectivity from FY-4A Lightning Data and Its Impact on the Assimilation and Forecasting for Severe Rainfall Storms

2020 ◽  
Vol 12 (7) ◽  
pp. 1165 ◽  
Author(s):  
Yaodeng Chen ◽  
Zheng Yu ◽  
Wei Han ◽  
Jing He ◽  
Min Chen
Keyword(s):  
Data Assimilation ◽  
Weather Prediction ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Mountainous Areas ◽  
Wind Fields ◽  
Moisture Condition ◽  
Eastern Hemisphere ◽  
Skill Scores ◽  
Logarithmic Relationship

As the first Geostationary Satellite with the LMI (Lightning Mapping Imager) instrument aboard running over the eastern hemisphere, FY-4A (Feng-Yun-4A) can better indicate severe convection and compensate for the limitations of radar observation in temporal and spatial resolution. In order to realize the application of FY-4A lightning data in numerical weather prediction (NWP) models, a logarithmic relationship between FY-4A lightning density and maximum radar reflectivity is presented to convert FY-4A lightning data into maximum FY-4A proxy reflectivity. Then, according to the profiles of radar reflectivity, the maximum FY-4A proxy reflectivity is extended to 3D FY-4A proxy reflectivity. Finally, the 3D FY-4A proxy reflectivity is assimilated in RMAPS-ST (Rapid-refresh Multi-scale Analysis and Prediction System—Short Term) to compare with radar assimilation. Four groups of continuous cycling data assimilation and forecasting experiments are carried out for a severe rainfall case. The results demonstrate that cycling assimilation of 3D FY-4A proxy reflectivity can adjust the moisture condition effectively, and indirectly affects the temperature and wind fields, then makes the thermal and dynamic analysis more reasonable. The Fractions Skill Scores (FSSs) show that the rainfall forecasts are improved significantly within 6 h by assimilating 3D FY-4A proxy reflectivity, which is similar to the parallel experiments in assimilating radar reflectivity. In addition, other cycling data assimilation experiments are carried out in mountainous areas without radar data. The improvement of precipitation forecasts in mountainous areas further proves that the application of assimilating 3D FY-4A proxy reflectivity can be considered a useful substitute where observed radar data are missing. Through the two severe rainfall cases, this method could be framed as an example of how to use lightning for data assimilation.

scholarly journals Operational Implementation of the 1D+3D-Var Assimilation Method of Radar Reflectivity Data in the AROME Model

2014 ◽  
Vol 142 (5) ◽  
pp. 1852-1873 ◽  
Author(s):  
Eric Wattrelot ◽  
Olivier Caumont ◽  
Jean-François Mahfouf
Keyword(s):  
Relative Humidity ◽  
Data Assimilation ◽  
Three Dimensional ◽  
Radar Reflectivity ◽  
Precipitation Forecast ◽  
Limited Area ◽  
Short Term ◽  
Background Error ◽  
Reflectivity Data

AbstractThis paper presents results from radar reflectivity data assimilation experiments with the nonhydrostatic limited-area model Application of Research to Operations at Mesoscale (AROME) in an operational context. A one-dimensional (1D) Bayesian retrieval of relative humidity profiles followed by a three-dimensional variational data assimilation (3D-Var) technique is adopted. Several preprocessing procedures of raw reflectivity data are presented and the use of the nonrainy signal in the assimilation is widely discussed and illustrated. This two-step methodology allows the authors to build up a screening procedure that takes into account the evaluation of the results from the 1D Bayesian retrieval. In particular, the 1D retrieval is checked by comparing a pseudoanalyzed reflectivity to the observed reflectivity. Additionally, a physical consistency between the reflectivity innovations and the 1D relative humidity increments is imposed before assimilating relative humidity pseudo-observations with other observations. This allows the authors to counteract the difficulty of the current 3D-Var system to correct strong differences between model and observed clouds from the crude specification of background-error covariances. Assimilation experiments of radar reflectivity data in a preoperational configuration are first performed over a 1-month period. Positive impacts on short-term precipitation forecast scores are systematically found. The evaluation shows improvements on the analysis and also on objective conventional forecast scores, in particular for the model wind field up to 12 h. A case study for a specific precipitating system demonstrates the capacity of the method for improving significantly short-term forecasts of organized convection.

scholarly journals Precipitation Forecast Characteristics of Radar Data Assimilation Based on Precipitation Types

2021 ◽  
Author(s):  
Jeong-Ho Bae ◽  
Ki-Hong Min
Keyword(s):  
Numerical Model ◽  
Data Assimilation ◽  
Radar Data ◽  
Precipitation Forecast ◽  
Convective System ◽  
Observation Data ◽  
Microphysics Scheme ◽  
Assimilation Experiment ◽  
Mesoscale Convective ◽  
Radar Data Assimilation

Radar observation data with high temporal and spatial resolution are used in the data assimilation experiment to improve precipitation forecast of a numerical model. The numerical model considered in this study is Weather Research and Forecasting (WRF) model with double-moment 6-class microphysics scheme (WDM6). We calculated radar equivalent reflectivity factor using higher resolution WRF and compared with radar observations in South Korea. To compare the precipitation forecast characteristics of three-dimensional variational (3D-Var) assimilation of radar data, four experiments are performed based on different precipitation types. Comparisons of the 24-h accumulated rainfall with Automatic Weather Station (AWS) data, Contoured Frequency by Altitude Diagram (CFAD), Time Height Cross Sections (THCS), and vertical hydrometeor profiles are used to evaluate and compare the accuracy. The model simulations are performed with and with-out 3D-VAR radar reflectivity, radial velocity and AWS assimilation for two mesoscale convective cases and two synoptic scale cases. The radar data assimilation experiment improved the location of precipitation area and rainfall intensity compared to the control run. Especially, for the two convective cases, simulating mesoscale convective system was greatly improved.

Sign in / Sign up

Export Citation Format

Share Document