scholarly journals A Simple Spectrophotometric Method for Determination of Glyoxylic Acid in Its Synthesis Mixture

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Mazhar Abdulwahed ◽  
Lamia Mamoly ◽  
Wael Bosnali
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Glycolic Acid ◽  
Glyoxylic Acid ◽  
Reference Method ◽  
Recovery Ratio ◽  
Molar Ratios ◽  
Relative Standard ◽  
Reaction Stoichiometry

A new simple and reliable spectrophotometric method is described to determine glyoxylic acid in its synthesis reaction mixture containing oxalic acid, glycolic acid, acetic acid, glyoxal, and ethylene glycol by means of a modified Hopkins–Cole reaction between glyoxylic acid and tryptophan in presence of ferric chloride and concentrated sulphuric acid. The linear range of glyoxylic acid concentration is 0–0.028 M. The limits of detection (LOD) and quantitation (LOQ) are 0.0019 M and 0.00577 M, respectively. The LOD, LOQ, standard deviation, relative standard deviation, and recovery ratio of the proposed method are comparable with a selected HPLC reference method. Both methods displayed same precision and credibility. Reaction stoichiometry between tryptophan and glyoxylic acid is assumed to be 2 : 3. Reaction mechanism has been postulated based on identified molar ratios of reactants. Glyoxal gave a negative test with tryptophan although it is a dialdehyde.

scholarly journals A Simple Spectrophotometric Method for Determination of Glyoxylic Acid in Its Synthesis Mixture

2020 ◽  
Author(s):  
Mazhar Abdulwahed ◽  
Lamia Mamoly ◽  
Wael Bosnali
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Glyoxylic Acid ◽  
Reference Method ◽  
Recovery Ratio ◽  
Molar Ratios ◽  
Relative Standard ◽  
Concentrated Sulfuric Acid ◽  
Reaction Stoichiometry

A submitted manuscript to International Journal of Analytical Chemistry:<div><br><div>A new spectrophotometric method is described to determine glyoxylic acid in its synthesis reaction mixture by means of a modified Hopkins-Cole reaction between glyoxylic acid and tryptophan in presence of ferric chloride and concentrated sulfuric acid. The linear range of glyoxylic acid concentration is 0 - 0.028 M. The LOD and LOQ are 0.0019 M and 0.00577 M, respectively. The LOD, LOQ, standard deviation, relative standard deviation and recovery ratio of the proposed method are comparable with a selected HPLC reference method. Both methods displayed same precision and credibility. Reaction stoichiometry between tryptophan and glyoxylic acid is assumed to be 2:3. Reaction mechanism has been postulated based on identified molar ratios of reactants. Glyoxal gave a negative test with tryptophan although it is a di-aldehyde. </div></div>

scholarly journals A Simple Spectrophotometric Method for Determination of Glyoxylic Acid in Its Synthesis Mixture

2020 ◽  
Author(s):  
Mazhar Abdulwahed ◽  
Lamia Mamoly ◽  
Wael Bosnali
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Glyoxylic Acid ◽  
Reference Method ◽  
Recovery Ratio ◽  
Molar Ratios ◽  
Relative Standard ◽  
Concentrated Sulfuric Acid ◽  
Reaction Stoichiometry

A submitted manuscript to International Journal of Analytical Chemistry:<div><br><div>A new spectrophotometric method is described to determine glyoxylic acid in its synthesis reaction mixture by means of a modified Hopkins-Cole reaction between glyoxylic acid and tryptophan in presence of ferric chloride and concentrated sulfuric acid. The linear range of glyoxylic acid concentration is 0 - 0.028 M. The LOD and LOQ are 0.0019 M and 0.00577 M, respectively. The LOD, LOQ, standard deviation, relative standard deviation and recovery ratio of the proposed method are comparable with a selected HPLC reference method. Both methods displayed same precision and credibility. Reaction stoichiometry between tryptophan and glyoxylic acid is assumed to be 2:3. Reaction mechanism has been postulated based on identified molar ratios of reactants. Glyoxal gave a negative test with tryptophan although it is a di-aldehyde. </div></div>

scholarly journals Determination of Sodium Cromoglycate by a New Kinetic Spectrophotometric Method in Biological Samples

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Mohsen Keyvanfard ◽  
Khadijeh Alizad ◽  
Razieh Shakeri
Keyword(s):  
Standard Deviation ◽  
Sodium Cromoglycate ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Biological Samples ◽  
Limit Of Detection ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A new kinetic spectrophotometric method is described for the determination of ultratrace amounts of sodium cromoglycate (SCG). The method based on catalytic action of SCG on the oxidation of amaranth with periodate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the amaranth at 518 nm, for the first 4 min from initiation of the reaction. Calibration curve was linear in the range of 4.0−36.0 ng mL−1SCG. The limit of detection is 2.7 ng mL−1SCG. The relative standard deviation (RSD) for ten replicate analyses of 12, 20, and 28 ng mL−1SCG was 0.40%, 0.32%, and 0.53%, respectively. The proposed method was used for the determination of SCG in biological samples.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

scholarly journals IMPORTANCE OF THE OXIDATION REACTION OF SODIUM METAPERIODATE FOR SPECTROPHOTOMETRIC ASSAY OF RESERPINE

2004 ◽  
Vol 72 (2) ◽  
pp. 121-129
Author(s):  
D. K. Singh ◽  
Archana Sahu
Keyword(s):  
Acetic Acid ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Oxidation Reaction ◽  
Spectrophotometric Assay ◽  
Sodium Metaperiodate ◽  
Relative Standard ◽  
Sensitive Spectrophotometric Method

A new simple, accurate and reasonably sensitive spectrophotometric method is described for the determination of reserpine based on the oxidation with sodium metaperiodate in the presence of acetic acid and coupling with 3-methyl-2-benzo thiazolinone hydazone hydrochloride (MBTH) to form highly blue coloured product showing maximum absorbance at 630 nm. Beer's law is obeyed in the range 0.2–1.6 µg ml−1. The relative standard deviation was found to be less than 1%. The proposed method can be applied for the estimation of reserpine in tablets with no evidence of interference from excipients.

scholarly journals Spectrophotometric Method for Determination of Paraquat in Food and Biological Samples

1997 ◽  
Vol 80 (2) ◽  
pp. 388-391 ◽  
Author(s):  
Ritu Kesari ◽  
Manish Rai ◽  
Vinay Kumar Gupta
Keyword(s):  
Standard Deviation ◽  
Metal Ions ◽  
Relative Standard Deviation ◽  
Alkaline Medium ◽  
Spectrophotometric Method ◽  
Biological Samples ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Sensitive Spectrophotometric Method

Abstract A sensitive spectrophotometric method was developed for determination of paraquat, a widely used herbicide. Paraquat was reduced with glucose in an alkaline medium, and the blue radical ion obtained was measured at 600 nm. Beer’s law was obeyed at 0.1–1.2 ppm paraquat. The molar absorptivity was 1.26 × 105 L mol-1 cm-1. The standard deviation and relative standard deviation were ± 0.007 and 2.0%, respectively, for 5 μg paraquat/10 mL analyzed over 7 days. The method was free from interference by other commonly used pesticides and metal ions. The method may be used to the determine paraquat in plants, fruits, grains, water, blood, and urine.

scholarly journals Application of Derivative Spectrophotometry for Simultaneous Determination of Quinapril and Hydrochlorothiazide in the Combination Tablets

2004 ◽  
Vol 87 (4) ◽  
pp. 847-851 ◽  
Author(s):  
Dorota Kowalczuk ◽  
Hanna Hopkała
Keyword(s):  
Standard Deviation ◽  
Simultaneous Determination ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Derivative Spectrophotometry ◽  
Order Derivative ◽  
Zero Crossing ◽  
Relative Standard ◽  
Separation Of Components

Abstract A new second-order-derivative spectrophotometric method using zero-crossing technique measures quinapril (QUI) and hydrochlorothiazide (HYD) in 2-component mixtures. The procedure does not require prior separation of components from the sample. QUI was determined at a wavelength of 211.6 nm (zero-crossing wavelength point of HYD). Similarly, HYD was measured at 270.8 nm (zero-crossing wavelength point of QUI). Calibration graphs were constructed over the concentration range of 4.0 to 24.0 μ/mL for QUI and 2.5 to 15.0 μg/mL for HYD. Detection and quantitation limits were 0.85 and 2.5 μg/mL for QUI and 0.12 and 0.4 μg/mL for HYD, respectively. The accuracy (recovery 100.5–102%), precision (relative standard deviation less than 3.5% for QUI and 1.5% for HYD), selectivity, and sensitivity of the elaborated methods were satisfactory. The proposed method was applied successfully for the determination of both drugs in QUI-HYD tablets.

Kinetic Spectrophotometric Determination of Ruthenium by its Catalytic Effect on the Reduction of Spadns with Sodium Hypophosphite in Micellar Media

2012 ◽  
Vol 204-208 ◽  
pp. 4067-4070 ◽  
Author(s):  
Zhi Rong Zhou ◽  
Li Zhen Zhang
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Limit Of Detection ◽  
Fixed Time ◽  
Sodium Hypophosphite ◽  
Micellar Media ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A simple kinetic spectrophotometric method was developed for the determination of trace amounts of Ru (III). The method is based on the reduction of spadns by sodium hypophosphite (NaH2PO2) in micellar media. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of spadns at 515 nm with a fixed-time method. The decrease in the absorbance of spadns is proportional to the concentration of Ru (III) in the range 0.40–10.0 μg/L with a fixed time of 2.5–7.0 min from the initiation of the reaction. The limit of detection is 0.12 μg/L Ru (III). The relative standard deviation for the determination of 0.10 and 0.20 μg/25mL Ru (III) was 2.3 % and 2.0 %, respectively. The method was applied to the determination of Ru (III) in some ores and metallurgy products.

scholarly journals Flotation-Spectrophotometric Method for the Determination of Aluminium ion Using Xylenol Orange

2011 ◽  
Vol 8 (4) ◽  
pp. 1528-1535 ◽  
Author(s):  
F. Nekouei ◽  
Sh. Nekouei
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Limit Of Detection ◽  
Xylenol Orange ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Ion Associate ◽  
Sensitive Method

A simple, fast, reproducible and sensitive method for the flotation- spectrophotometric determination of Al3+is reported. The apparent molar absorptivity (ε) of the ion associate was determined to be 8.35×104L mol-1cm-1. The calibration curve was linear in the concentration range of 1.0-50 ng mL-1of Al3+with a correlation coefficient of 0.9997. The limit of detection (LOD) was 0.621 ng mL. The relative standard deviation (RSD) at 10 and 30 ng mL-1of aluminium were 1.580 and 2.410% (n=7) respectively. The method was applied for measuring the amount of aluminium in water samples.

Kinetic Spectrophotometric Method for the Determination of Selenium (IV) by its Catalytic Effect on the Reduction of Arsenazo III with Sodium Hypophosphite in Micellar Media

2012 ◽  
Vol 554-556 ◽  
pp. 926-933
Author(s):  
Zhi Rong Zhou ◽  
Li Zhen Zhang
Keyword(s):  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Fixed Time ◽  
Sodium Hypophosphite ◽  
Micellar Media ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A simple and sensitive kinetic spectrophotometric method for the determination of trace selenium (IV) is described, based on its catalytic effect on the reduction arsenazo III (AsA III) with sodium hypophosphite (NaH2PO2) in a solution of 0.02 mol/L sulfuric acid and in the presence of cationic micellar media. The reaction rate is monitored spectrophotometrically by measuring the decrease in absorbance of AsA III at 550 nm with a fixed-time method. The decrease in the absorbance of AsA III is proportional to the concentration of Se(IV) in the range 0.16–1.0 µg/L after a fixed time of 4–10 min from the initiation of the reaction. The limit of detection is 0.049 µg/L Se(IV). The influence of th e factors such as acidity, concentration of reactants, type and concentration of surfactants, reactive time, temperature and co-existing ions on the reaction is discussed. The optimum reaction conditions of reaction are established and some kinetic parameters are determined; the apparent activation energy of catalytic reaction is 59.51 kJ/mol. The relative standard deviation for eleven replicate determination of 0.02, and 0.01µg/25mL Se(IV) was 2.0 % and 2.4 %, respectively. Combined with sulphydryl dextrane gel (SDG) separation and enriching, the method has been successfully applied to the determination of Se (IV) in foodstuff and human hair samples with the relative standard deviation of 2.1 %–5.8 % and the recovery of 97.0 %–103.3 %, the results are in good agreement with those provided by ICP-AES method.

Sign in / Sign up

Export Citation Format

Share Document