scholarly journals Flotation-Spectrophotometric Method for the Determination of Aluminium ion Using Xylenol Orange

2011 ◽  
Vol 8 (4) ◽  
pp. 1528-1535 ◽  
Author(s):  
F. Nekouei ◽  
Sh. Nekouei
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Limit Of Detection ◽  
Xylenol Orange ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Ion Associate ◽  
Sensitive Method

A simple, fast, reproducible and sensitive method for the flotation- spectrophotometric determination of Al3+is reported. The apparent molar absorptivity (ε) of the ion associate was determined to be 8.35×104L mol-1cm-1. The calibration curve was linear in the concentration range of 1.0-50 ng mL-1of Al3+with a correlation coefficient of 0.9997. The limit of detection (LOD) was 0.621 ng mL. The relative standard deviation (RSD) at 10 and 30 ng mL-1of aluminium were 1.580 and 2.410% (n=7) respectively. The method was applied for measuring the amount of aluminium in water samples.

scholarly journals Determination of Sodium Cromoglycate by a New Kinetic Spectrophotometric Method in Biological Samples

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Mohsen Keyvanfard ◽  
Khadijeh Alizad ◽  
Razieh Shakeri
Keyword(s):  
Standard Deviation ◽  
Sodium Cromoglycate ◽  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Biological Samples ◽  
Limit Of Detection ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A new kinetic spectrophotometric method is described for the determination of ultratrace amounts of sodium cromoglycate (SCG). The method based on catalytic action of SCG on the oxidation of amaranth with periodate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the amaranth at 518 nm, for the first 4 min from initiation of the reaction. Calibration curve was linear in the range of 4.0−36.0 ng mL−1SCG. The limit of detection is 2.7 ng mL−1SCG. The relative standard deviation (RSD) for ten replicate analyses of 12, 20, and 28 ng mL−1SCG was 0.40%, 0.32%, and 0.53%, respectively. The proposed method was used for the determination of SCG in biological samples.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

scholarly journals Spectrophotometric Method for Determination of Paraquat in Food and Biological Samples

1997 ◽  
Vol 80 (2) ◽  
pp. 388-391 ◽  
Author(s):  
Ritu Kesari ◽  
Manish Rai ◽  
Vinay Kumar Gupta
Keyword(s):  
Standard Deviation ◽  
Metal Ions ◽  
Relative Standard Deviation ◽  
Alkaline Medium ◽  
Spectrophotometric Method ◽  
Biological Samples ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Sensitive Spectrophotometric Method

Abstract A sensitive spectrophotometric method was developed for determination of paraquat, a widely used herbicide. Paraquat was reduced with glucose in an alkaline medium, and the blue radical ion obtained was measured at 600 nm. Beer’s law was obeyed at 0.1–1.2 ppm paraquat. The molar absorptivity was 1.26 × 105 L mol-1 cm-1. The standard deviation and relative standard deviation were ± 0.007 and 2.0%, respectively, for 5 μg paraquat/10 mL analyzed over 7 days. The method was free from interference by other commonly used pesticides and metal ions. The method may be used to the determine paraquat in plants, fruits, grains, water, blood, and urine.

Kinetic Spectrophotometric Determination of Ruthenium by its Catalytic Effect on the Reduction of Spadns with Sodium Hypophosphite in Micellar Media

2012 ◽  
Vol 204-208 ◽  
pp. 4067-4070 ◽  
Author(s):  
Zhi Rong Zhou ◽  
Li Zhen Zhang
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Limit Of Detection ◽  
Fixed Time ◽  
Sodium Hypophosphite ◽  
Micellar Media ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A simple kinetic spectrophotometric method was developed for the determination of trace amounts of Ru (III). The method is based on the reduction of spadns by sodium hypophosphite (NaH2PO2) in micellar media. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of spadns at 515 nm with a fixed-time method. The decrease in the absorbance of spadns is proportional to the concentration of Ru (III) in the range 0.40–10.0 μg/L with a fixed time of 2.5–7.0 min from the initiation of the reaction. The limit of detection is 0.12 μg/L Ru (III). The relative standard deviation for the determination of 0.10 and 0.20 μg/25mL Ru (III) was 2.3 % and 2.0 %, respectively. The method was applied to the determination of Ru (III) in some ores and metallurgy products.

scholarly journals Ultraviolet Spectrophotometric Method for Determination of Glipizide in Presence of Liposomal/Proliposomal Turbidity

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Neelkant Prasad ◽  
Roshan Issarani ◽  
Badri Prakash Nagori
Keyword(s):  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Limit Of Detection ◽  
Quantitative Estimation ◽  
Uv Detection ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Precision And Accuracy ◽  
Clear Solution

A simple and sensitive ultraviolet spectrophotometric method for quantitative estimation of glipizide in presence of lipid turbidity is described to avoid false estimation due to diffraction by turbidity. UV detection was performed at 230 nm, 225 nm, and 235 nm, and the calibration curve was plotted between resultant of absorbance of [230 nm − (225 nm + 235 nm)/2] and concentration of analyte. The calibration curve was linear over the concentration range tested (1–20 μg/mL) with limit of detection of 0.27 μg/mL and limit of quantification of 0.82 μg/mL. Percent relative standard deviations and percent relative mean error, representing precision and accuracy, respectively, for clear as well as turbid solutions, were found to be within acceptable limits, that is, always less than 0.69 and 0.41, respectively, for clear solution and 0.65 and 0.47, respectively, for turbid solution. Conclusively, our method was successfully applied for the determination of glipizide in clear as well as turbid solutions, and it was found that the drug analyte in both types of solutions can be detected from the same calibration curve accurately and precisely and glipizide entrapped in the liposomes or in proliposomal matrix was not detected.

scholarly journals Rapid and Sensitive Spectrophotometric Method for the Determination of the Trace Amount of Thallium (III) in Water and Urine Samples by New Oxidative Coupling Reaction

2019 ◽  
Vol 53 (4) ◽  
Author(s):  
Padmarajaiah Nagaraja ◽  
Naef Ghllab Saeed Al-Tayar ◽  
Anantharaman Shivakumar ◽  
Ashwinee Kumar Shresta ◽  
Avinash K. Gowda
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Rapid Determination ◽  
Coupling Reaction ◽  
Molar Absorptivity ◽  
Urine Samples ◽  
Oxidative Coupling Reaction ◽  
Relative Standard ◽  
Student’S T

A very simple, sensitive and fairly selective direct spectrophotometric method is presented for the rapid determination of thallium(III) at trace level. The method is based on the oxidation of 2-hydrazono-3-methyl-2,3-dihydrobenzo[d]thiazole hydrochloride (MBTH) by thallium(III) in phosphoric acid medium to form a diazoniumcation, which couples immediately with 10,11-dihydro-5Hdibenzo[b,f]azepine (IDB) at room temperature giving a blue colored species having a maximum absorption at 660 nm. The reaction conditions and other important analytical parameters were optimized.The calibration curve was found to be linear over the range of 0.1-4 μg/mL with molar absorptivity of 4.5 × 104 L mol- cm-1 and Sandell’s sensitivity of 0.00454 μg cm-2. The relative standard deviation and limit of detection have been found to be 0.58% and 0.0147 μg/mL respectively. Almost all common anions and cations are found notto interfering in matrix level of the analytical process. The method has been successfully applied for the determination of thallium(III) in synthetic standard mixtures, water and human urine samples. The performance of proposed method was evaluated in terms of student’s t-test and variance ratio F-test, to find out the significance of proposed method over the reported methods.    

scholarly journals SPECTROPHOTOMETRIC DETERMINATION OF CEFPIROME IN PHARMACEUTICAL PREPARATION

2020 ◽  
pp. 124-127
Author(s):  
DILIP M CHAFLE
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Preparation ◽  
Effect Of Temperature ◽  
Percentage Error ◽  
Ferric Nitrate ◽  
Red Color ◽  
Relative Standard

Objective: A simple, sensitive and precise visible spectrophotometric method has been proposed for the determination of cefpirome (CFM) in pure and oral injectable dosage form. Methods: A spectrophotometric method is based on the formation of stable red color product by oxidation of drugs by ferric nitrate and subsequent complexation with 1, 10 – phenanthroline with maximum absorption at 515 nm. Result: The red color complex was formed between Fe (II) and 1, 10 – phenanthroline after reduction of Fe (III) to Fe (II) in the presence of CFM drug. The phosphoric acid solution was used only for quenching the complex formation reaction. Several parameters such as the maximum wavelength of absorption, the volume of reagents, sequence of addition and effect of temperature and time of heating were optimized to achieve high sensitivity, stability and reproducible results. Under the optimum conditions, linear relationship with good correlation coefficient (0.994) was found over the concentration range from 0.20 to 6.00 μg/mL with a molar extinction coefficient 7.7813 × 104 L/mol/cm, limit of detection 0.2026 and limit of quantification 0.6141 μg/mL, respectively. Conclusion: The proposed method was evaluated statistically for linearity, accuracy, and precision in terms of standard deviation, percentage recovery, percentage error and relative standard deviation. The proposed method can be applied for the routine estimation of CFM in the laboratory.

Spectrophotometric Determination of Boron in Dates of Some Cultivars Grown in Saudi Arabia

1993 ◽  
Vol 76 (3) ◽  
pp. 601-603 ◽  
Author(s):  
A A Al-Warthan ◽  
S S Al-Showiman ◽  
S A Al-Tamrah ◽  
A A BaOsman
Keyword(s):  
Saudi Arabia ◽  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Spectrophotometric Determination ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Relative Standard ◽  
Sensitive Spectrophotometric Method

Abstract The formation of a red complex between boron and the quinalizarin reagent was investigated and used as the basis for a simple and sensitive spectrophotometric method for boron in date cultivars. At 620 nm, the absorbance was linear (r= 0.999) over the 0.25-2.5 μg/mL concentration range. The molar absorptivity was found to be 2.23 x 103mol-1cm-1 and the relative standard deviation for 10 replicates (1.0 μg/mL) was 0.97%.

Flotation-Dissolution-Spectrophotometric Determination of Phorate in Various Environmental Samples

2020 ◽  
Vol 33 (1) ◽  
pp. 18-23
Author(s):  
Harshita Sharma ◽  
Anushree Saha ◽  
Chhaya Bhatt ◽  
Kalpana Wani ◽  
Ajay Kumar Sahu ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Determination ◽  
Acidic Medium ◽  
Molar Absorptivity ◽  
Ammonium Molybdate ◽  
Organophosphate Pesticide ◽  
Organic Layers ◽  
Relative Standard ◽  
Ion Associate

The proposed method is based on flotation–dissolution an easy, impressible, extractive spectrophotometric determination, explained for easy investigation of the organophosphate pesticide phorate (O,O-diethyl S-[ethylthiomethyl] phosphorodithioate) on trace levels. A molybdophospho complex is generated when prorate is treated with ammonium molybdate in acidic medium. As an ion associate complex with methylene blue the complex is present in between of the water and organic layers which is extracted and then dissolved with acetone. The greenish blue complex produced show absorption maxima at 660 nm. Beer’s law range is found to be 0.5 to 16 µg per 10 ml for phorate. The molar absorptivity is 0.989×103 L mol-1 cm-1 and sandell’s sensitivity is 1.00×10-5 µg cm-2. Also calculated the standard deviation and relative standard deviation for the above method were ±0.006 and 1.95% respectively. The method has been applied and checked for the determination of phorate in water, soil and vegetables.

scholarly journals Spectrophotometric Method for the Determination of Drugs Containing Phenol Group by Using 2, 4- Dinitrophenylhydrazine

2010 ◽  
Vol 7 (2) ◽  
pp. 395-402
Author(s):  
Padmarajaiah Nagaraja ◽  
Ashwinee Kumar Shrestha
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Dosage Forms ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Forms ◽  
Accuracy And Precision ◽  
Relative Standard ◽  
Phenolic Drugs

A spectrophotometric method has been proposed for the determination of four phenolic drugs; salbutamol, ritodrine, amoxicillin and isoxsuprine. The method is based on the oxidation of 2, 4- dinitrophenyl-hydrazine and coupling of the oxidized product with drugs to give intensely colored chromogen. Under the proposed optimum condition, beer’s law was obeyed in the concentration range of 2.5-17, 2-29, 4-33 and 5-30 μg/mL for salbutamol, ritodrine, amoxicillin and isoxsuprine respectively. The limit of detection (LOD) and limit of quantification (LOQ) were 0.2, 0.83, 0.09, 0.84 μg/mL and 0.66, 2.79, 0.3 and 2.81 μg/mL in the same order. No interference was observed from common pharmaceutical adjuvants. The ringbom plots and low relative standard deviation assert the applicability of this method. The suggested method was further applied for the determinations of drugs in commercial pharmaceutical dosage forms, which was compared statistically with reference methods by means oft- test andF- test and were found not to differ significantly at 95% confidence level. The procedure is characterized by its simplicity with accuracy and precision.

Sign in / Sign up

Export Citation Format

Share Document