scholarly journals Buccolingual Inclination of Canine and First and Second Molar Teeth and the Curve of Wilson in Different Sagittal Skeletal Patterns of Adults Using Cone-Beam Computed Tomography

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Amin Golshah ◽  
Navid Rezaei ◽  
Sara Heshmati
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Dental Arch ◽  
Cross Sectional ◽  
Second Molar ◽  
Molar Teeth ◽  
The Mean

Objectives. This study aimed to assess the buccolingual inclination of canine and first and second molar teeth and the curve of Wilson in different sagittal skeletal patterns in untreated adults using cone-beam computed tomography (CBCT). Materials and Methods. Sixty-six CBCT scans of adults (mean age: 28.74 ± 5.25 years) were evaluated in this cross-sectional study. The images were standardized using the Frankfurt horizontal plane and the interorbital line. The sagittal skeletal pattern was determined using the ANB angle and Wits appraisal. Inclination angles were measured by NNT Viewer and Mimics software. The curve of Wilson was measured by connecting the tips of mesiobuccal and mesiolingual cusps of maxillary first and second molars along the buccal groove and measuring the formed angle. Data were analyzed using ANOVA. Results. The intraobserver agreement was 0.969. The mean inclination of maxillary first and second molars in class I and III patients was significantly higher than that in class II patients P < 0.05 . The mean inclination of mandibular first and second molars in class II patients was significantly higher than that in class I and III patients P < 0.05 . The difference in inclination of maxillary and mandibular canine teeth was not significant P > 0.05 . The mean curve of Wilson in second molars of class II patients was significantly higher than that in class I patients P < 0.05 . Conclusion. In different sagittal skeletal patterns, a compensatory relationship exists between the opposing teeth, which, along with the standards of crowns, can be used to determine the appropriate position of teeth in dental arch.

scholarly journals Buccolingual Inclination of Canine and First and Second Molar Teeth and The Curve of Wilson in Different Sagittal Skeletal Patterns of Adults Using Cone-Beam Computed Tomography

2020 ◽  
Author(s):  
Amin Golshah ◽  
Navid Rezae ◽  
Sara Heshmati
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Dental Arch ◽  
Cross Sectional ◽  
Second Molar ◽  
Molar Teeth ◽  
The Mean

Abstract Background: This study aimed to assess the buccolingual inclination of canine and first and second molar teeth and the curve of Wilson in different sagittal skeletal patterns in untreated adults using cone-beam computed tomography (CBCT). Methods: Sixty-six CBCT scans of adults (mean age: 28.74±5.25 years) were evaluated in this cross-sectional study. The images were standardized using the Frankfurt horizontal plane and the interorbital line. The sagittal skeletal pattern was determined using the ANB angle and Wits appraisal. Inclination angles were measured by NNT Viewer and Mimics software. The curve of Wilson was measured by connecting the tips of mesiobuccal and mesiolingual cusps of maxillary first and second molars along the buccal groove and measuring the formed angle. Data were analyzed using ANOVA. Results: The intraobserver agreement was 0.969. The mean inclination of maxillary first and second molars in class I and III patients was significantly higher than that in class II patients (P<0.05). The mean inclination of mandibular first and second molars in class II patients was significantly higher than that in class I and III patients (P<0.05). The difference in inclination of maxillary and mandibular canine teeth was not significant (P>0.05). The mean curve of Wilson in second molars of class II patients was significantly higher than that in class I patients (P<0.05). Conclusion: In different sagittal skeletal patterns, a compensatory relationship exists between the opposing teeth, which along with the standards of crowns, can be used to determine the appropriate position of teeth in dental arch.

scholarly journals Temporomandibular Joint Osseous Morphology of Class I and Class II Malocclusions in the Normal Skeletal Pattern: A Cone-Beam Computed Tomography Study

Diagnostics ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 541
Author(s):  
Xiao-Chuan Fan ◽  
Lin-Sha Ma ◽  
Li Chen ◽  
Diwakar Singh ◽  
Xiaohui Rausch-Fan ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Glenoid Fossa ◽  
Linear Measurements ◽  
Significant Difference ◽  
Skeletal Pattern

(1) Background—The aim of the present study was to evaluate the correlation between the temporomandibular joint (TMJ) osseous morphology of normal skeletal pattern individuals with different dental malocclusions by using cone-beam computed tomography (CBCT). (2) Methods—The CBCT images of bilateral TMJs in 67 subjects with skeletal class I and average mandibular angle (26 males and 41 females, age range 20–49 years) were evaluated in this study. The subjects were divided into class I, class II division 1, and class II division 2 according to the molar relationship and retroclination of the maxillary incisors. Angular and linear measurements of TMJ were evaluated and the differences between the groups were statistically analyzed. (3) Results—Intragroup comparisons showed statistical differences for articular eminence inclination, the width of the glenoid fossa, the ratio of the width of the glenoid fossa to the depth of the glenoid fossa, the condylar angle, and the intercondylar angle between the malocclusion groups. The measurements of the glenoid fossa shape showed no significant difference between the left and right sides. Females showed more differences in the morphological parameters of TMJ between the three malocclusion groups than the males. (4) Conclusion—The present study revealed differences in the TMJ osseous morphology between dental class I and class II malocclusions in the normal skeletal pattern.

scholarly journals Intraoperative cone beam computed tomography for detecting residual stones in percutaneous nephrolithotomy: a feasibility study

Urolithiasis ◽  
2021 ◽  
Author(s):  
R. A. Kingma ◽  
M. J. H. Voskamp ◽  
B. H. J. Doornweerd ◽  
I. J. de Jong ◽  
S. Roemeling
Keyword(s):  
Computed Tomography ◽  
Percutaneous Nephrolithotomy ◽  
Cone Beam Computed Tomography ◽  
University Hospital ◽  
Cone Beam ◽  
Cross Sectional ◽  
The Mean ◽  
Residual Stones ◽  
Residual Fragments

AbstractCone beam computed tomography (CBCT) provides multiplanar cross-sectional imaging and three-dimensional reconstructions and can be used intraoperatively in a hybrid operating room. In this study, we investigated the feasibility of using a CBCT-scanner for detecting residual stones during percutaneous nephrolithotomy (PCNL). Intraoperative CBCT-scans were made during PCNL procedures from November 2018 until March 2019 in a university hospital. At the point where the urologist would have otherwise ended the procedure, a CBCT-scan was made to image any residual fragments that could not be detected by either nephroscopy or conventional C-arm fluoroscopy. Residual fragments that were visualized on the CBCT-scan were attempted to be extracted additionally. To evaluate the effect of this additional extraction, each CBCT-scan was compared with a regular follow-up CT-scan that was made 4 weeks postoperatively. A total of 19 procedures were analyzed in this study. The mean duration of performing the CBCT-scan, including preparation and interpretation, was 8 min. Additional stone extraction, if applicable, had a mean duration of 11 min. The mean effective dose per CBCT-scan was 7.25 mSv. Additional extraction of residual fragments as imaged on the CBCT-scan occurred in nine procedures (47%). Of the follow-up CT-scans, 63% showed a stone-free status as compared to 47% of the intraoperative CBCT-scans. We conclude that the use of CBCT for the detection of residual stones in PCNL is meaningful, safe, and feasible.

scholarly journals A Cone-beam Computed Tomography Evaluation of Mandibular Anterior Alveolar Bone Dimensions in Class I and Class II Skeletal Patterns

2021 ◽  
Vol 12 (3) ◽  
pp. 230-233
Author(s):  
Piyush Gupta ◽  
Nivedita Sahoo ◽  
Kavuda Nagarjuna Prasad ◽  
MS Rami Reddy ◽  
Saranya Sreedhar ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Alveolar Bone ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Bone Dimensions

scholarly journals Anatomical characteristics of mandibular bone in skeletal Class I, II and III patients by using cone beam computed tomography images in an iranian population

2021 ◽  
Vol 24 (2) ◽  
Author(s):  
Mohammad Zandi ◽  
Abbas Shokri ◽  
Vahid Mollabashi ◽  
Zahed Eghdami ◽  
Payam Amini
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Class Iii ◽  
Anatomical Characteristics ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Ramus Height

Objetive: This study aimed to compare the anatomical characteristics of the mandible in patients with skeletal class I, II and class III disorders using cone beam computed tomography (CBCT). Material and Methods: CBCT scans of patients between 17 to 40 years taken with NewTom 3G CBCT system with 12-inch field of view (FOV) were selected from the archive. Lateral cephalograms were obtained from CBCT scans of patients, and type of skeletal malocclusion was determined (Class I, II or III). All CBCT scans were evaluated in the sagittal, coronal and axial planes using the N.N.T viewer software. Results: The ramus height and distance from the mandibular foramen to the sigmoid notch in class II patients were significantly different from those in skeletal class I (P < 0.005). Distance from the mandibular canal to the anterior border of ramus in class III individuals was significantly different from that in skeletal class I individuals (P < .005). Conclusion: Length of the body of mandible in skeletal class I was significantly different from that in skeletal class II and III patients. Also, ramus height in skeletal class I was significantly different from that in skeletal class II patients. CBCT had high efficacy for accurate identification of anatomical landmarks.   Keywords Prognathism; Retrognathism; Mandible; Anatomy; Cone beam computed tomography.

scholarly journals Cone Beam Computed Tomography-Based Anatomical Assessment of the Olfactory Fossa

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Andre Luiz Ferreira Costa ◽  
Aline Kataki Paixão ◽  
Bianca Costa Gonçalves ◽  
Celso Massahiro Ogawa ◽  
Thiago Martinelli ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Type I ◽  
Type Ii ◽  
Sectional Study ◽  
Cross Sectional ◽  
Computed Tomography Images ◽  
The Mean

This study aimed to investigate the olfactory fossa according to the Keros classification using cone beam computed tomography. This cross-sectional study analysed cone beam computed tomography images selected from a database belonging to a radiology centre. The scans of 174 healthy patients were analysed by using the Xoran software. Gender, age, and side were correlated with the Keros classification. The mean age of the 174 patients was 45.3 years. The most prevalent Keros classification was type II (65.52%), followed by type III (20.69%) and type I (13.79%). No significant differences were found between Keros classification and the variables age, right side (pvalue = 0.4620), and left side (pvalue = 0.5709). There were also no significant differences between gender and the variables right side (pvalue = 0.1421) and left side (pvalue = 0.2136). Based on these results, we suggest that cone beam computed tomography can be recommended for analysis of the anterior skull base. Keros type II was the most prevalent type in our sample.

scholarly journals Evaluation of the position and morphology of tongue and hyoid bone in skeletal Class II malocclusion based on cone beam computed tomography

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Wener Chen ◽  
HungEn Mou ◽  
Yufen Qian ◽  
Liwen Qian
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Hyoid Bone ◽  
Class Ii ◽  
Growth Patterns ◽  
Class I ◽  
Cone Beam ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Average Angle

Abstract Background The aim of the study was to analyze the morphology and position of the tongue and hyoid bone in skeletal Class II patients with different vertical growth patterns by cone beam computed tomography in comparison to skeletal Class I patients. Methods Ninety subjects with malocclusion were divided into skeletal Class II and Class I groups by ANB angles. Based on different vertical growth patterns, subjects in each group were divided into 3 subgroups: high-angle group (MP-FH ≥ 32.0°), average-angle group (22.0° ≤ MP-FH < 32°) and low-angle group (MP-FH < 22°). The position and morphology of the tongue and hyoid bone were evaluated in the cone beam computed tomography images. The independent Student’s t‐test was used to compare the position and morphology of the tongue and hyoid bone between skeletal Class I and Class II groups. One-way analysis of variance (ANOVA) was used to compare the measurement indexes of different vertical facial patterns in each group. Results Patients in skeletal Class II group had lower tongue posture, and the tongue body was smaller than that of those in the Class I group (P < 0.05). The position of the hyoid bone was lower in the skeletal Class II group than in Class I group (P < 0.05). The tongue length and H-Me in the skeletal Class I group with a low angle were significantly larger than those with an average angle and high angle (P < 0.05). There was no significant difference in the position or morphology of the tongue and hyoid bone in the skeletal Class II group with different vertical facial patterns (P > 0.05). Conclusion Patients with skeletal Class II malocclusion have lower tongue posture, a smaller tongue body, and greater occurrence of posterior inferior hyoid bone position than skeletal Class I patients. The length of the mandibular body in skeletal Class I patients with a horizontal growth type is longer. The position and morphology of the tongue and hyoid bone were not greatly affected by vertical facial development in skeletal Class II patients.

Sign in / Sign up

Export Citation Format

Share Document