scholarly journals FDEM Modelling of Rock Fracture Process during Three-Point Bending Test under Quasistatic and Dynamic Loading Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-21
Author(s):  
Huaming An ◽  
Yushan Song ◽  
Hongyuan Liu
Keyword(s):  
Fracture Toughness ◽  
Dynamic Loading ◽  
Fracture Process ◽  
Loading Rate ◽  
Rock Fracture ◽  
Mesh Size ◽  
Bending Test ◽  
Loading Conditions ◽  
Three Point Bending ◽  
Dynamic Loading Conditions

A hybrid finite-discrete element method (FDEM) is proposed to model rock fracture initiation and propagation during a three-point bending test under quasistatic and dynamic loading conditions. Three fracture models have been implemented in the FDEM to model the transition from continuum to discontinuum through fracture and fragmentation. The loading rate effect on rock behaviour has been taken into account by the implementation of the relationship between the static and dynamic rock strengths derived from dynamic rock fracture experiments. The Brazilian tensile strength test has been modelled to calibrate the FDEM. The FDEM can well model the stress and fracture propagation and well show the stress distribution along the vertical diameter of the disc during the Brazilian tensile strength test. Then, FDEM is implemented to study the rock fracture process during three-point bending tests under quasistatic and dynamic loading conditions. The FDEM has well modelled the stress and fracture propagation and can obtain reasonable fracture toughness. After that, the effects of the loading rate on the rock strength and rock fracture toughness are discussed, and the mesh size and mesh orientation on the fracture patterns are also discussed. It is concluded that the FDEM can well model the rock fracture process by the implementation of the three fracture models. The FDEM can capture the loading rate effect on rock strength and rock fracture toughness. The FDEM is a valuable tool for studying the rock behaviour on the dynamic loading although the proposed method is sensitive to the mesh size and mesh orientation.

Determination of Fracture Toughness JIc Under Quasi-Static and Dynamic Loading Conditions Using Wedge Loaded Specimens

1984 ◽  
Vol 12 (5) ◽  
pp. 316 ◽  
Author(s):  
R Horstman ◽  
KA Peters ◽  
S Gebremedhin ◽  
RL Meltzer ◽  
M Bruce Vieth ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Dynamic Loading ◽  
Loading Conditions ◽  
Dynamic Loading Conditions ◽  
Static And Dynamic Loading

Influence of Confinement on Ceramic’s Mechanical Properties

2016 ◽  
Vol 848 ◽  
pp. 249-255
Author(s):  
Xiao Cong Hang ◽  
Yun Kai Li
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Boron Carbide ◽  
Fracture Process ◽  
Hot Spot ◽  
Efficiency Factor ◽  
Bending Test ◽  
Depth Of Penetration ◽  
Constraint Force ◽  
Three Point Bending

The wide use of ceramic material in engineering is restricted by its brittleness, so the strengthening and toughening of ceramics is always a hot spot of research in material area. And in general, the modification of ceramics is achieved by changing its internal microstructure. In this paper the influence of confinement on the mechanical properties of ceramics and the specific use of this method were investigated. Firstly, the influence of confinement on ceramic’s fracture process was analyzed in theory. Then the three-point bending test was conducted using two types of ceramics, viz. Zirconia and Alumina. The experimental results showed that the fracturing load of zirconia increased from 4.3298 to 5.4639KN as the confinement was increased from 0 to 150MPa, 26.19% increase was found in the confined specimen. The same trend was observed in alumina, whose fracturing load increased from 3.0446 to 5.0259KN as the confinement was increased from 0 to 150MPa, 65.07% increase was found. After that, a series of ballistic experiments were performed. The target in this experiment was boron carbide ceramic, and it was confined by 45 steel. The results showed that with the constraint force was bigger, the ballistic efficiency factor was better and the depth of penetration was smaller. In other words, the confinement can increase the defensible performance of the target. In summary, the ceramic’s fracture toughness, defensible performance and ballistic efficiency factor can be increased by adding confinement to it.

scholarly journals Effect of Nesfatin-1 on Rat Humerus Mechanical Properties under Quasi-Static and Impact Loading Conditions

Materials ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 333
Author(s):  
Anna Skic ◽  
Iwona Puzio ◽  
Grzegorz Tymicki ◽  
Paweł Kołodziej ◽  
Marta Pawłowska-Olszewska ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Bone Structure ◽  
Critical Energy ◽  
Bending Test ◽  
Ovariectomized Rats ◽  
Loading Conditions ◽  
Sem Images ◽  
Three Point Bending ◽  
The Impact

The investigations on the response of bone tissue under different loading conditions are important from clinical and engineering points of view. In this paper, the influence of nesfatin-1 administration on rat humerus mechanical properties was analyzed. The classical three-point bending and impact tests were carried out for three rat bone groups: control (SHO), the humerus of animals under the conditions of established osteopenia (OVX), and bones of rats receiving nesfatin-1 after ovariectomy (NES). The experiments proved that the bone strength parameters measured under various mechanical loading conditions increased after the nesfatin-1 administration. The OVX bones were most susceptible to deformation and had the smallest fracture toughness. The SEM images of humerus fracture surface in this group showed that ovariectomized rats had a much looser bone structure compared to the SHO and NES females. Loosening of the bone structure was also confirmed by the densitometric and qualitative EDS analysis, showing a decrease in the OVX bones’ mineral content. The samples of the NES group were characterized by the largest values of maximum force obtained under both quasi-static and impact conditions. The energies absorbed during the impact and the critical energy for fracture (from the three-point bending test) were similar for the SHO and NES groups. Statistically significant differences were observed between the mean Fi max values of all analyzed sample groups. The obtained results suggest that the impact test was more sensitive than the classical quasi-static three-point bending one. Hence, Fi max could be used as a parameter to predict bone fracture toughness.

Development and Verification of a Dynamic TKR Model

2002 ◽  
Author(s):  
Jason P. Halloran ◽  
Anthony J. Petrella ◽  
Paul J. Rullkoetter
Keyword(s):  
Finite Element ◽  
Contact Mechanics ◽  
Dynamic Loading ◽  
Soft Tissues ◽  
Dynamic Models ◽  
Total Joint Replacement ◽  
Fe Model ◽  
Loading Conditions ◽  
Dynamic Loading Conditions

The success of current total knee replacement (TKR) devices is contingent on the kinematics and contact mechanics during in vivo activity. Indicators of potential clinical performance of total joint replacement devices include contact stress and area due to articulations, and tibio-femoral and patello-femoral kinematics. An effective way of evaluating these parameters during the design phase or before clinical use is via computationally efficient computer models. Previous finite element (FE) knee models have generally been used to determine contact stresses and/or areas during static or quasi-static loading conditions. The majority of knee models intended to predict relative kinematics have not been able to determine contact mechanics simultaneously. Recently, however, explicit dynamic finite element methods have been used to develop dynamic models of TKR able to efficiently determine joint and contact mechanics during dynamic loading conditions [1,2]. The objective of this research was to develop and validate an explicit FE model of a TKR which includes tibio-femoral and patello-femoral articulations and surrounding soft tissues. The six degree-of-freedom kinematics, kinetics and polyethylene contact mechanics during dynamic loading conditions were then predicted during gait simulation.

Sign in / Sign up

Export Citation Format

Share Document