scholarly journals Automatic Detection and Parameter Estimation of Ginkgo biloba in Urban Environment Based on RGB Images

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Kai Xia ◽  
Hao Wang ◽  
Yinhui Yang ◽  
Xiaochen Du ◽  
Hailin Feng
Keyword(s):  
Neural Network ◽  
Parameter Estimation ◽  
Inventory Management ◽  
Ginkgo Biloba ◽  
Tree Height ◽  
Urban Trees ◽  
Percentage Error ◽  
Individual Tree ◽  
Tree Crowns ◽  
Rgb Images

Individual tree crown detection and morphological parameter estimation can be used to quantify the social, ecological, and landscape value of urban trees, which play increasingly important roles in densely built cities. In this study, a novel architecture based on deep learning was developed to automatically detect tree crowns and estimate crown sizes and tree heights from a set of red-green-blue (RGB) images. The feasibility of the architecture was verified based on high-resolution unmanned aerial vehicle (UAV) images using a neural network called FPN-Faster R-CNN, which is a unified network combining a feature pyramid network (FPN) and a faster region-based convolutional neural network (Faster R-CNN). Among more than 400 tree crowns, including 213 crowns of Ginkgo biloba, in 7 complex test scenes, 174 ginkgo tree crowns were correctly identified, yielding a recall level of 0.82. The precision and F -score were 0.96 and 0.88, respectively. The mean absolute error (MAE) and mean absolute percentage error (MAPE) of crown width estimation were 0.37 m and 8.71%, respectively. The MAE and MAPE of tree height estimation were 0.68 m and 7.33%, respectively. The results showed that the architecture is practical and can be applied to many complex urban scenes to meet the needs of urban green space inventory management.

scholarly journals THE EFFECT OF WIND ON TREE STEM PARAMETER ESTIMATION USING TERRESTRIAL LASER SCANNING

2016 ◽  
Vol III-8 ◽  
pp. 117-122 ◽  
Author(s):  
M. T. Vaaja ◽  
J.-P. Virtanen ◽  
M. Kurkela ◽  
V. Lehtola ◽  
J. Hyyppä ◽  
...  
Keyword(s):  
Parameter Estimation ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Tree Height ◽  
Individual Tree ◽  
Finnish Meteorological Institute ◽  
Wind Speeds ◽  
Forest Inventories ◽  
Level Data ◽  
Tree Stem

The 3D measurement technique of terrestrial laser scanning (TLS) in forest inventories has shown great potential for improving the accuracy and efficiency of both individual tree and plot level data collection. However, the effect of wind has been poorly estimated in the error analysis of TLS tree measurements although it causes varying deformations to the trees. In this paper, we evaluated the effect of wind on tree stem parameter estimation at different heights using TLS. The data consists of one measured Scots pine captured from three different scanning directions with two different scanning resolutions, 6.3 mm and 3.1 mm at 10 m. The measurements were conducted under two different wind speeds, approximately 3 m/s and 9 m/s, as recorded by a nearby weather station of the Finnish Meteorological Institute. Our results show that the wind may cause both the underestimation and overestimation of tree diameter when using TLS. The duration of the scanning is found to have an impact for the measured shape of the tree stem under 9 m/s wind conditions. The results also indicate that a 9 m/s wind does not have a significant effect on the stem parameters of the lower part of a tree (<28% of the tree height). However, as the results imply, the wind conditions should be taken into account more comprehensively in analysis of TLS tree measurements, especially if multiple scans from different positions are registered together. In addition, TLS could potentially be applied to indirectly measure wind speed by observing the tree stem movement.

scholarly journals THE EFFECT OF WIND ON TREE STEM PARAMETER ESTIMATION USING TERRESTRIAL LASER SCANNING

2016 ◽  
Vol III-8 ◽  
pp. 117-122 ◽  
Author(s):  
M. T. Vaaja ◽  
J.-P. Virtanen ◽  
M. Kurkela ◽  
V. Lehtola ◽  
J. Hyyppä ◽  
...  
Keyword(s):  
Parameter Estimation ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Tree Height ◽  
Individual Tree ◽  
Finnish Meteorological Institute ◽  
Wind Speeds ◽  
Forest Inventories ◽  
Level Data ◽  
Tree Stem

The 3D measurement technique of terrestrial laser scanning (TLS) in forest inventories has shown great potential for improving the accuracy and efficiency of both individual tree and plot level data collection. However, the effect of wind has been poorly estimated in the error analysis of TLS tree measurements although it causes varying deformations to the trees. In this paper, we evaluated the effect of wind on tree stem parameter estimation at different heights using TLS. The data consists of one measured Scots pine captured from three different scanning directions with two different scanning resolutions, 6.3 mm and 3.1 mm at 10 m. The measurements were conducted under two different wind speeds, approximately 3 m/s and 9 m/s, as recorded by a nearby weather station of the Finnish Meteorological Institute. Our results show that the wind may cause both the underestimation and overestimation of tree diameter when using TLS. The duration of the scanning is found to have an impact for the measured shape of the tree stem under 9 m/s wind conditions. The results also indicate that a 9 m/s wind does not have a significant effect on the stem parameters of the lower part of a tree (<28% of the tree height). However, as the results imply, the wind conditions should be taken into account more comprehensively in analysis of TLS tree measurements, especially if multiple scans from different positions are registered together. In addition, TLS could potentially be applied to indirectly measure wind speed by observing the tree stem movement.

scholarly journals Mapping Single Palm-Trees Species in Forest Environments with a Deep Convolutional Neural Network

2021 ◽  
Author(s):  
Luciene Sales Dagher Arce ◽  
Mauro dos Santos de Arruda ◽  
Danielle Elis Garcia Furuya ◽  
Lucas Prado Osco ◽  
Ana Paula Marques Ramos ◽  
...  
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Tree Species ◽  
State Of The Art ◽  
Palm Tree ◽  
Forest Environment ◽  
Individual Tree ◽  
Palm Trees ◽  
Rgb Images

Accurately mapping individual tree species in densely forested environments is crucial to forest inventory. When considering only RGB images, this is a challenging task for many automatic photogrammetry processes. The main reason for that is the spectral similarity between species in RGB scenes, which can be a hindrance for most automatic methods. State-of-the-art deep learning methods could be capable of identifying tree species with an attractive cost, accuracy, and computational load in RGB images. This paper presents a deep learning-based approach to detect an important multi-use species of palm trees (Mauritia flexuosa; i.e., Buriti) on aerial RGB imagery. In South-America, this palm tree is essential for many indigenous and local communities because of its characteristics. The species is also a valuable indicator of water resources, which comes as a benefit for mapping its location. The method is based on a Convolutional Neural Network (CNN) to identify and geolocate singular tree species in a high-complexity forest environment, and considers the likelihood of every pixel in the image to be recognized as a possible tree by implementing a confidence map feature extraction. This study compares the performance of the proposed method against state-of-the-art object detection networks. For this, images from a dataset composed of 1,394 airborne scenes, where 5,334 palm-trees were manually labeled, were used. The results returned a mean absolute error (MAE) of 0.75 trees and an F1-measure of 86.9%. These results are better than both Faster R-CNN and RetinaNet considering equal experiment conditions. The proposed network provided fast solutions to detect the palm trees, with a delivered image detection of 0.073 seconds and a standard deviation of 0.002 using the GPU. In conclusion, the method presented is efficient to deal with a high-density forest scenario and can accurately map the location of single species like the M flexuosa palm tree and may be useful for future frameworks.

scholarly journals Influences of determined and estimated dendrometric variables on the precision of volumetric modelling

2021 ◽  
Vol 67 (No. 12) ◽  
pp. 553-561
Author(s):  
José Antonio Aleixo Da Silva ◽  
Rinaldo Luiz Caraciolo Ferreira
Keyword(s):  
Tree Height ◽  
Information Criterion ◽  
Ground Level ◽  
Percentage Error ◽  
Individual Tree ◽  
Significance Level ◽  
Independent Variables ◽  
Semi Arid Region ◽  
Fit Index ◽  
Total Tree

The use of independent variables in volumetric modelling is an important step in fitting models to represent tree or stand characteristics. The DBH measured at 1.3 m from the ground level and total tree height (Ht) are the most commonly used independent variables when modelling individual tree volumes. This work aimed to analyze the importance of independent variables in fitting and selecting volumetric equations. A total of 750 trees from an experiment with three Eucalyptus spp. clones planted in five spacings in the semi-arid region of Pernambuco were used. Four statistical procedures were applied to compare the equations: Adjusted Fit Index (AFI), Akaike information criterion (AIC), mean absolute percentage error (MAPE), and a completely random design having the real tree volume as control and the fit equations as treatments. The error measuring heights in the field (EH) was also analyzed. Four heights were evaluated: Ht, height estimated in the field (He) and heights adjusted (Ha) from hypsometric relationships using the DBH [Ha (a)] and D<sub>1.7</sub> [Ha (b)], which was the diameter most correlated with the volume. The result indicates that all 18 fitted models provided high precision volumetric equations which do not differ at the 5% significance level.

Wind Power Forecasting Using Wavelet Transform and General Regression Neural Network for Ontario Electricity Market

2020 ◽  
Vol 13 (1) ◽  
pp. 16-26
Author(s):  
Sumit Saroha ◽  
Sanjeev K. Aggarwal
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Wavelet Transform ◽  
Wind Power ◽  
Electricity Market ◽  
General Regression Neural Network ◽  
Percentage Error ◽  
Wind Power Forecasting ◽  
General Regression ◽  
Power Forecasting

Objective: The estimation accuracy of wind power is an important subject of concern for reliable grid operations and taking part in open access. So, with an objective to improve the wind power forecasting accuracy. Methods: This article presents Wavelet Transform (WT) based General Regression Neural Network (GRNN) with statistical time series input selection technique. Results: The results of the proposed model are compared with four different models namely naïve benchmark model, feed forward neural networks, recurrent neural networks and GRNN on the basis of Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) performance metric. Conclusion: The historical data used by the presented models has been collected from the Ontario Electricity Market for the year 2011 to 2015 and tested for a long time period of more than two years (28 months) from November 2012 to February 2015 with one month estimation moving window.

scholarly journals Accurate Transmission-Less Attenuation Correction Method for Amyloid-β Brain PET Using Deep Neural Network

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1836
Author(s):  
Bo-Hye Choi ◽  
Donghwi Hwang ◽  
Seung-Kwan Kang ◽  
Kyeong-Yun Kim ◽  
Hongyoon Choi ◽  
...  
Keyword(s):  
Neural Network ◽  
Attenuation Correction ◽  
Complex Structure ◽  
Scatter Correction ◽  
Amyloid Β ◽  
Correction Method ◽  
Percentage Error ◽  
Similarity Coefficients ◽  
Brain Pet ◽  
Positron Emission

The lack of physically measured attenuation maps (μ-maps) for attenuation and scatter correction is an important technical challenge in brain-dedicated stand-alone positron emission tomography (PET) scanners. The accuracy of the calculated attenuation correction is limited by the nonuniformity of tissue composition due to pathologic conditions and the complex structure of facial bones. The aim of this study is to develop an accurate transmission-less attenuation correction method for amyloid-β (Aβ) brain PET studies. We investigated the validity of a deep convolutional neural network trained to produce a CT-derived μ-map (μ-CT) from simultaneously reconstructed activity and attenuation maps using the MLAA (maximum likelihood reconstruction of activity and attenuation) algorithm for Aβ brain PET. The performance of three different structures of U-net models (2D, 2.5D, and 3D) were compared. The U-net models generated less noisy and more uniform μ-maps than MLAA μ-maps. Among the three different U-net models, the patch-based 3D U-net model reduced noise and cross-talk artifacts more effectively. The Dice similarity coefficients between the μ-map generated using 3D U-net and μ-CT in bone and air segments were 0.83 and 0.67. All three U-net models showed better voxel-wise correlation of the μ-maps compared to MLAA. The patch-based 3D U-net model was the best. While the uptake value of MLAA yielded a high percentage error of 20% or more, the uptake value of 3D U-nets yielded the lowest percentage error within 5%. The proposed deep learning approach that requires no transmission data, anatomic image, or atlas/template for PET attenuation correction remarkably enhanced the quantitative accuracy of the simultaneously estimated MLAA μ-maps from Aβ brain PET.

scholarly journals Development and Performance Evaluation of a Very Low-Cost UAV-Lidar System for Forestry Applications

2020 ◽  
Vol 13 (1) ◽  
pp. 77
Author(s):  
Tianyu Hu ◽  
Xiliang Sun ◽  
Yanjun Su ◽  
Hongcan Guan ◽  
Qianhui Sun ◽  
...  
Keyword(s):  
Forest Inventory ◽  
Low Cost ◽  
Canopy Cover ◽  
Tree Height ◽  
Flying Height ◽  
Tree Level ◽  
Forest Site ◽  
Lidar System ◽  
Individual Tree ◽  
Gap Fraction

Accurate and repeated forest inventory data are critical to understand forest ecosystem processes and manage forest resources. In recent years, unmanned aerial vehicle (UAV)-borne light detection and ranging (lidar) systems have demonstrated effectiveness at deriving forest inventory attributes. However, their high cost has largely prevented them from being used in large-scale forest applications. Here, we developed a very low-cost UAV lidar system that integrates a recently emerged DJI Livox MID40 laser scanner (~$600 USD) and evaluated its capability in estimating both individual tree-level (i.e., tree height) and plot-level forest inventory attributes (i.e., canopy cover, gap fraction, and leaf area index (LAI)). Moreover, a comprehensive comparison was conducted between the developed DJI Livox system and four other UAV lidar systems equipped with high-end laser scanners (i.e., RIEGL VUX-1 UAV, RIEGL miniVUX-1 UAV, HESAI Pandar40, and Velodyne Puck LITE). Using these instruments, we surveyed a coniferous forest site and a broadleaved forest site, with tree densities ranging from 500 trees/ha to 3000 trees/ha, with 52 UAV flights at different flying height and speed combinations. The developed DJI Livox MID40 system effectively captured the upper canopy structure and terrain surface information at both forest sites. The estimated individual tree height was highly correlated with field measurements (coniferous site: R2 = 0.96, root mean squared error/RMSE = 0.59 m; broadleaved site: R2 = 0.70, RMSE = 1.63 m). The plot-level estimates of canopy cover, gap fraction, and LAI corresponded well with those derived from the high-end RIEGL VUX-1 UAV system but tended to have systematic biases in areas with medium to high canopy densities. Overall, the DJI Livox MID40 system performed comparably to the RIEGL miniVUX-1 UAV, HESAI Pandar40, and Velodyne Puck LITE systems in the coniferous site and to the Velodyne Puck LITE system in the broadleaved forest. Despite its apparent weaknesses of limited sensitivity to low-intensity returns and narrow field of view, we believe that the very low-cost system developed by this study can largely broaden the potential use of UAV lidar in forest inventory applications. This study also provides guidance for the selection of the appropriate UAV lidar system and flight specifications for forest research and management.

A neural network approach to predicting viability of native seeds from their optic RGB images

2020 ◽  
Author(s):  
Camilo Franco ◽  
Mateo Marulanda ◽  
Adriana Cruz ◽  
Orlando Morales ◽  
Luz Stella Fuentes ◽  
...  
Keyword(s):  
Neural Network ◽  
Network Approach ◽  
Neural Network Approach ◽  
Rgb Images
Sign in / Sign up

Export Citation Format

Share Document