scholarly journals Reliability Estimation for the Remained Stress-Strength Model under the Generalized Exponential Lifetime Distribution

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Mohammad Mehdi Saber ◽  
Marwa M. Mohie El-Din ◽  
Haitham M. Yousof
Keyword(s):  
Real Data ◽  
Lifetime Distribution ◽  
Reliability Estimation ◽  
Reliability Model ◽  
Strength Model ◽  
Generalized Exponential Distribution ◽  
Reliability Engineering ◽  
Likelihood Estimator ◽  
Strength Models ◽  
Psychology And Medicine

A stress-strength reliability model compares the strength and stresses on a certain system; it is used not only primarily in reliability engineering and quality control but also in economics, psychology, and medicine. In this paper, a novel extension of stress-strength models is presented. The mew model is applied under the generalized exponential distribution. The maximum likelihood estimator, asymptotic distribution, and Bayesian estimation are obtained. A comprehensive simulation study along with real data analysis is performed for illustrating the importance of the new stress-strength model.

scholarly journals Characteristics and Application of the NHPP Log-Logistic Reliability Model

2018 ◽  
Vol 8 (1) ◽  
pp. 44
Author(s):  
Lutfiah Ismail Al turk
Keyword(s):  
Evaluation Criteria ◽  
Real Data ◽  
Least Square ◽  
Estimation Methods ◽  
Data Sets ◽  
Reliability Model ◽  
Reliability Engineering ◽  
Reliability Models ◽  
Time Domain Data ◽  
Linear Least Square

In this paper, a Nonhomogeneous Poisson Process (NHPP) reliability model based on the two-parameter Log-Logistic (LL) distribution is considered. The essential model’s characteristics are derived and represented graphically. The parameters of the model are estimated by the Maximum Likelihood (ML) and Non-linear Least Square (NLS) estimation methods for the case of time domain data. An application to show the flexibility of the considered model are conducted based on five real data sets and using three evaluation criteria. We hope this model will help as an alternative model to other useful reliability models for describing real data in reliability engineering area.

scholarly journals Estimation a Stress-Strength Model for P (Yr:n1 < Xk:n2 ) Using the Lindley Distribution

2017 ◽  
Vol 40 (1) ◽  
pp. 105-121 ◽  
Author(s):  
Marwa Khalil
Keyword(s):  
Maximum Likelihood ◽  
Simulation Study ◽  
Real Data ◽  
Minimum Variance ◽  
Strength Model ◽  
Practical Application ◽  
Likelihood Estimator ◽  
Lindley Distribution ◽  
Minimum Variance Unbiased Estimator ◽  
Proposed Model

The problem of estimation reliability in a multicomponent stress-strength model, when the system consists of k components have strength each compo- nent experiencing a random stress, is considered in this paper. The reliability of such a system is obtained when strength and stress variables are given by Lindley distribution. The system is regarded as alive only if at least r out of k (r < k) strength exceeds the stress. The multicomponent reliability of the system is given by Rr,k . The maximum likelihood estimator (M LE), uniformly minimum variance unbiased estimator (UMVUE) and Bayes esti- mator of Rr,k are obtained. A simulation study is performed to compare the different estimators of Rr,k . Real data is used as a practical application of the proposed model.

scholarly journals Inference on Reliability of Stress-Strength Models for Poisson Data

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Alessandro Barbiero
Keyword(s):  
Sample Size ◽  
Asymptotic Theory ◽  
Average Length ◽  
Minimum Variance ◽  
Delta Method ◽  
Reliability Engineering ◽  
Likelihood Estimator ◽  
Poisson Data ◽  
Point Estimators ◽  
Strength Models

Researchers in reliability engineering regularly encounter variables that are discrete in nature, such as the number of events (e.g., failures) occurring in a certain spatial or temporal interval. The methods for analyzing and interpreting such data are often based on asymptotic theory, so that when the sample size is not large, their accuracy is suspect. This paper discusses statistical inference for the reliability of stress-strength models when stress and strength are independent Poisson random variables. The maximum likelihood estimator and the uniformly minimum variance unbiased estimator are here presented and empirically compared in terms of their mean square error; recalling the delta method, confidence intervals based on these point estimators are proposed, and their reliance is investigated through a simulation study, which assesses their performance in terms of coverage rate and average length under several scenarios and for various sample sizes. The study indicates that the two estimators possess similar properties, and the accuracy of these estimators is still satisfactory even when the sample size is small. An application to an engineering experiment is also provided to elucidate the use of the proposed methods.

scholarly journals Classical and Bayesian Inference of Conditional Stress-Strength Model under Kumaraswamy Distribution

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Fathy H. Riad ◽  
Mohammad Mehdi Saber ◽  
Mehrdad Taghipour ◽  
M. M. Abd El-Raouf
Keyword(s):  
Bayesian Inference ◽  
Maximum Likelihood ◽  
Maximum Likelihood Estimator ◽  
Asymptotic Distribution ◽  
Confidence Intervals ◽  
Bootstrap Method ◽  
Strength Model ◽  
Likelihood Estimator ◽  
Kumaraswamy Distribution ◽  
Strength Models

Stress-strength models have been frequently studied in recent years. An applicable extension of these models is conditional stress-strength models. The maximum likelihood estimator of conditional stress-strength models, asymptotic distribution of this estimator, and its confidence intervals are obtained for Kumaraswamy distribution. In addition, Bayesian estimation and bootstrap method are applied to the model.

scholarly journals Transforming variables to central normality

2021 ◽  
Author(s):  
Jakob Raymaekers ◽  
Peter J. Rousseeuw
Keyword(s):  
Maximum Likelihood ◽  
Maximum Likelihood Estimator ◽  
Simulation Study ◽  
Real Data ◽  
Data Sets ◽  
Transformation Parameter ◽  
Likelihood Estimator ◽  
Extensive Simulation ◽  
Highly Sensitive

AbstractMany real data sets contain numerical features (variables) whose distribution is far from normal (Gaussian). Instead, their distribution is often skewed. In order to handle such data it is customary to preprocess the variables to make them more normal. The Box–Cox and Yeo–Johnson transformations are well-known tools for this. However, the standard maximum likelihood estimator of their transformation parameter is highly sensitive to outliers, and will often try to move outliers inward at the expense of the normality of the central part of the data. We propose a modification of these transformations as well as an estimator of the transformation parameter that is robust to outliers, so the transformed data can be approximately normal in the center and a few outliers may deviate from it. It compares favorably to existing techniques in an extensive simulation study and on real data.

scholarly journals Modeling Software Fault-Detection and Fault-Correction Processes by Considering the Dependencies between Fault Amounts

2021 ◽  
Vol 11 (15) ◽  
pp. 6998
Author(s):  
Qiuying Li ◽  
Hoang Pham
Keyword(s):  
Time Delay ◽  
Fault Detection ◽  
Software Reliability ◽  
Growth Models ◽  
Predictive Performance ◽  
Real Data ◽  
Reliability Estimation ◽  
Model Parameters ◽  
Dual Processes ◽  
Correction Process

Many NHPP software reliability growth models (SRGMs) have been proposed to assess software reliability during the past 40 years, but most of them have focused on modeling the fault detection process (FDP) in two ways: one is to ignore the fault correction process (FCP), i.e., faults are assumed to be instantaneously removed after the failure caused by the faults is detected. However, in real software development, it is not always reliable as fault removal usually needs time, i.e., the faults causing failures cannot always be removed at once and the detected failures will become more and more difficult to correct as testing progresses. Another way to model the fault correction process is to consider the time delay between the fault detection and fault correction. The time delay has been assumed to be constant and function dependent on time or random variables following some kind of distribution. In this paper, some useful approaches to the modeling of dual fault detection and correction processes are discussed. The dependencies between fault amounts of dual processes are considered instead of fault correction time-delay. A model aiming to integrate fault-detection processes and fault-correction processes, along with the incorporation of a fault introduction rate and testing coverage rate into the software reliability evaluation is proposed. The model parameters are estimated using the Least Squares Estimation (LSE) method. The descriptive and predictive performance of this proposed model and other existing NHPP SRGMs are investigated by using three real data-sets based on four criteria, respectively. The results show that the new model can be significantly effective in yielding better reliability estimation and prediction.

Strength Model Uncertainties of Burst, Yielding, and Excessive Bending of Piping

2009 ◽  
Vol 131 (3) ◽  
Author(s):  
Kleio Avrithi ◽  
Bilal M. Ayyub
Keyword(s):  
Structural Design ◽  
Design Method ◽  
Strength Model ◽  
Allowable Stress ◽  
Model Uncertainties ◽  
Reliability Based Design ◽  
Design Variables ◽  
Strength Models ◽  
Potential Use ◽  
Allowable Stress Design

Nuclear safety-piping is designed according to the ASME Boiler and Pressure Vessel Code, Sections III, NB-, NC-, and ND-3600 that use the allowable stress design method (ASD). The potential use instead of reliability-based design equations for nuclear piping could benefit the structural design by providing, among others, consistent reliability levels for piping. For the development of such equations, not only the probabilistic characteristics of the design variables are needed, but also the quantification of the uncertainties introduced by the strength models that are used in order to estimate the resistance of pipes subjected to different loadings. This paper evaluates strength models, and therefore provides necessary information for the reliability-based design of pipes for burst or yielding due to internal pressure and for excessive bending.

scholarly journals The Weibull Birnbaum-Saunders Distribution And Its Applications

2020 ◽  
Vol 9 (1) ◽  
pp. 61-81
Author(s):  
Lazhar BENKHELIFA
Keyword(s):  
Maximum Likelihood ◽  
Estimation Method ◽  
Likelihood Estimation ◽  
Real Data ◽  
Reliability Estimation ◽  
Maximum Likelihood Estimates ◽  
Model Parameters ◽  
Data Sets ◽  
Proposed Model ◽  
Modeling Data

A new lifetime model, with four positive parameters, called the Weibull Birnbaum-Saunders distribution is proposed. The proposed model extends the Birnbaum-Saunders distribution and provides great flexibility in modeling data in practice. Some mathematical properties of the new distribution are obtained including expansions for the cumulative and density functions, moments, generating function, mean deviations, order statistics and reliability. Estimation of the model parameters is carried out by the maximum likelihood estimation method. A simulation study is presented to show the performance of the maximum likelihood estimates of the model parameters. The flexibility of the new model is examined by applying it to two real data sets.

Sign in / Sign up

Export Citation Format

Share Document