scholarly journals Research on Input Scheme Selection of a Novel Parallel Mechanism

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Yajun Chen ◽  
Yongbin Li ◽  
Dong Yang ◽  
Tiejun Li
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
End Effector ◽  
Input Selection ◽  
Selection Principle ◽  
Mechanism Research ◽  
Dual Arm Robot ◽  
Evaluation Mechanism ◽  
Heavy Loads ◽  
Scheme Selection

When the two arms of the robot are transporting the heavy loads together, a new parallel mechanism is formed. The actuator input selection and optimization of the parallel mechanism are basic and important problems in mechanism research. In this paper, a 2-RPPPS dual-arm robot is taken as the research object. Firstly, based on the screw theory and input selection principle, 158 reasonable schemes are obtained. Then, an evaluation mechanism is established to screen out the schemes that do not conform to the input selection principle. Then, the end effector of the parallel mechanism moves along two different trajectories. Using the particle swarm optimization algorithm, the inverse kinematics solution of each trajectory is obtained, and the velocity and acceleration of each actuator under different trajectories are obtained. Finally, the motion stability of each actuator is evaluated, and the best scheme is selected. The results show that the best input scheme can be selected according to different trajectories, so as to improve the performance of the parallel mechanism. To the authors’ knowledge, no one has done any research on selecting the appropriate input scheme according to the trajectory of the end effector.

Actuating Input Selection of 5-UPS/PRPU Parallel Machine Tool

2005 ◽  
Author(s):  
Jian-She Gao ◽  
Ren-Cheng Zheng ◽  
Yong-Sheng Zhao
Keyword(s):  
Parallel Mechanism ◽  
Basic Problem ◽  
Screw Theory ◽  
Parallel Machine ◽  
Condition Numbers ◽  
Constraint Matrix ◽  
Input Selection ◽  
Moving Platform ◽  
Parallel Machine Tool ◽  
Selection Of

The actuating input selection is an important basic problem for the parallel mechanism. Based on the screw theory, the constraint screw can be got after locking a kinematic pair in any limb, which can be taken as actuating wrench acted on the moving platform of the parallel mechanism. The constraint screw matrix is composed of the structure constraint screws and the constraint screws of the actuating pairs. The reasonableness of input selection can be judged by the rank of the constraint matrix. The performance of the combinations of actuating inputs is evaluated by the condition numbers of the force constraint matrix and the torque constraint matrix respectively. The theory presented is validated by the simulation and the maching test.

Kinematic Analyses of 5-DOF 3-RCRR Parallel Mechanism

2005 ◽  
Author(s):  
Zhen Huang ◽  
Si J. Zhu
Keyword(s):  
Reference Point ◽  
Parallel Mechanism ◽  
Screw Theory ◽  
Mobility Analysis ◽  
End Effector ◽  
Numerical Example ◽  
Rotation Center ◽  
Kinematic Analyses ◽  
Base Platform ◽  
Virtual Pairs

This paper presents the kinematic analyses of a 5-DOF 3-RCRR parallel mechanism. The end-effector of this mechanism can rotate round rotation center and one reference point on it can translate in a plane parallels to the base platform. Since the traditional Kutzbach-Gru¨bler formula is not valid for this mechanism, the modified Kutzbach-Gru¨bler formula and screw theory are used in the mobility analysis. The Duffy’s spherical analytic theory is used in forward/reverse position analyses. In forward/reverse velocity/acceleration analyses, virtual mechanism principle is used to build a virtual parallel mechanism (3-PvRCRR), which is equivalent to the initial mechanism (3-RCRR) on kinematics if all rates of virtual pairs (Pv) are set to be zero. At the end, some kinematics curves are presented with a numerical example.

A Systematic Approach for Accuracy Design of Lower-Mobility Parallel Mechanism

Robotica ◽  
2020 ◽  
Vol 38 (12) ◽  
pp. 2173-2188
Author(s):  
Wenjie Tian ◽  
Ziqian Shen ◽  
Dongpo Lv ◽  
Fuwen Yin
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Geometric Error ◽  
Error Modeling ◽  
Tolerance Allocation ◽  
Design Stage ◽  
Geometric Errors ◽  
End Effector ◽  
Allocation Method ◽  
Lower Mobility

SUMMARYGeometric accuracy is a critical performance factor for parallel robots, and regardless of error compensation, accuracy design or tolerance allocation is another way to ensure the pose accuracy of a robot at design stage. A general method of both geometric error modeling and accuracy design of lower-mobility parallel mechanisms is presented. First, a general approach for error modeling of lower-mobility parallel mechanism is proposed based on screw theory, and then the geometric errors affecting the compensatable and uncompensatable accuracy of the end-effector are separated using the properties of dual vector space. The pose error aroused by compensatable geometric errors can be compensated via kinematic calibration, while the uncompensatable geometric errors should be minimized during the manufacturing and assembly processes. Based on that, the tolerance allocation method is presented, giving each uncompensatable geometric error a proper tolerance by the use of reliability theory. Compared with the traditional tolerance allocation method, the advantages of the proposed method are as follows: the number of geometric errors to be allocated is greatly reduced; the results of serialized tolerance allocation can be obtained according to different reliability indices of pose accuracy of end-effector for designers to choose; on the premise of guaranteeing the same pose accuracy of end-effector, the allocated tolerances are loose and easy to realize. Finally, the proposed methods are successfully applied to an R(2-RPS&RP)&UPS lower-mobility parallel robot, and the effectiveness and practicability of the proposed method are verified.

scholarly journals Actuation Spaces Synthesis of Lower-Mobility Parallel Mechanisms Based on Screw Theory

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Shihua Li ◽  
Yanxia Shan ◽  
Jingjun Yu ◽  
Yaxiong Ke
Keyword(s):  
Parallel Mechanism ◽  
Theoretical Foundation ◽  
Screw Theory ◽  
Synthesis Process ◽  
Concept Design ◽  
Parallel Mechanisms ◽  
Functional Requirements ◽  
Unified Approach ◽  
Input Selection ◽  
Lower Mobility

AbstractThe lower-mobility parallel mechanism has been widely used in the engineering field due to its numerous excellent characteristics. However, little work has been devoted to the actuator selection and placement that best satisfy the system’s functional requirements during concept design. In this study, a unified approach for synthesizing the actuation spaces of both rigid and flexure parallel mechanisms has been presented, and all possible combinations of inputs could be obtained, laying a theoretical foundation for the subsequent optimization of inputs. According to the linear independence of actuation space and constraint space of the lower-mobility parallel mechanism, a general expression of actuation spaces in the format of screw systems is deduced, a unified synthesis process for the lower-mobility parallel mechanism is derived, and the efficiency of the method is validated with two selective examples based on screw theory. This study presents a theoretical framework for the input selection problems of parallel mechanisms, aiming to help designers select and place actuators in a correct and even optimal way after the configuration design.

Kinematic analysis and design of a novel 6-degree of freedom parallel robot

2014 ◽  
Vol 229 (2) ◽  
pp. 291-303 ◽  
Author(s):  
DU Hui ◽  
GAO Feng ◽  
PAN Yang
Keyword(s):  
Set Theory ◽  
Kinematic Analysis ◽  
Parallel Mechanism ◽  
Design Methodology ◽  
Parallel Robot ◽  
End Effector ◽  
Analysis And Design ◽  
Velocity Models ◽  
Reachable Workspace ◽  
Rotational Motions

A novel 3-UP3R parallel mechanism with six degree of freedoms is proposed in this paper. One most important advantage of this mechanism is that the three translational and three rotational motions are partially decoupled: the end-effector position is only determined by three inputs, while the rotational angles are relative to all six inputs. The design methodology via GF set theory is brought out, using which the limb type can be determined. The mobility of the end-effector is analyzed. After that, the kinematic and velocity models are formulated. Then, workspace is studied, and since the robot is partially decoupled, the reachable workspace is also the dexterous workspace. In the end, both local and global performances are discussed using conditioning indexes. The experiment of real prototype shows that this mechanism works well and may be applied in many fields.

Experimental Validation of the Kinematics of a 3PRS Compliant Mechanism for Micromilling

2015 ◽  
Author(s):  
Antonio Ruiz ◽  
Francisco Campa Gomez ◽  
Constantino Roldan-Paraponiaris ◽  
Oscar Altuzarra
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Experimental Validation ◽  
Compliant Mechanism ◽  
Motion Controller ◽  
End Effector ◽  
Compliant Joints ◽  
Hybrid Manipulator ◽  
Compliant Parallel Mechanism ◽  
Actuated Joints

The present work deals with the development of a hybrid manipulator of 5 degrees of freedom for milling moulds for microlenses. The manipulator is based on a XY stage under a 3PRS compliant parallel mechanism. The mechanism takes advantage of the compliant joints to achieve higher repetitiveness, smoother motion and a higher bandwidth, due to the high precision demanded from the process, under 0.1 micrometers. This work is focused on the kinematics of the compliant stage of the hybrid manipulator. First, an analysis of the workspace required for the milling of a single mould has been performed, calculating the displacements required in X, Y, Z axis as well as two relative rotations between the tool and the workpiece from a programmed toolpath. Then, the 3PRS compliant parallel mechanism has been designed using FEM with the objective of being stiff enough to support the cutting forces from the micromilling, but flexible enough in the revolution and spherical compliant joints to provide the displacements needed. Finally, a prototype of the 3PRS compliant mechanism has been built, implementing a motion controller to perform translations in Z direction and two rotations. The resulting displacements in the end effector and the actuated joints have been measured and compared with the FEM calculations and with the rigid body kinematics of the 3PRS.

scholarly journals A novel solution of inverse kinematic for 6R robot manipulator with offset joint based on screw theory

2020 ◽  
Vol 17 (3) ◽  
pp. 172988142092564
Author(s):  
Zhiwei Liao ◽  
Gedong Jiang ◽  
Fei Zhao ◽  
Xuesong Mei ◽  
Yang Yue
Keyword(s):  
Joint Angle ◽  
Screw Theory ◽  
Robot Manipulator ◽  
Inverse Kinematic ◽  
Transformation Matrix ◽  
Inverse Kinematic Problem ◽  
End Effector ◽  
Closed Form Solutions ◽  
Specific Configuration ◽  
Kinematic Approach

This article proposes a novel inverse kinematic approach with translation transformation matrix based on screw theory to solve the inverse kinematic problem for 6R robot manipulator with offset joint. The translation transformation matrix is introduced to convert the 6R robot manipulator with offset joint to a new configuration with intersecting axes, and the mapping relationship from the end effector to the joint angle is established along with the Paden–Kahan subproblems. The eight closed solutions of the specific configuration are deduced, which automatically eliminate the singularity solutions. Moreover, the precision and efficiency of the proposed method are verified through a numerical example. Unlike other approaches, the presented algorithm not only inherits the superior accuracy of the other geometric approaches but also exhibits an outperform efficiency. Finally, the method is generalized to other 6R robots, which has closed-form solutions to further verify its versatility. The presented study provides some basis for further investigations, such as trajectory planning and motion control, which provides a new tool on the analysis and application of this kind of robot manipulator.

Relevance and Transferability for Parallel Mechanisms With Reconfigurable Platforms

2019 ◽  
Vol 11 (3) ◽  
Author(s):  
Xi Kang ◽  
Jian S. Dai
Keyword(s):  
System Theory ◽  
Parallel Mechanism ◽  
Geometric Model ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Kinematic Coupling ◽  
Reconfigurable Platforms ◽  
Reconfigurable Platform

The parallel mechanism with a reconfigurable platform retains all advantages of parallel mechanisms and provides additional functions by virtue of the reconfigurable platform, leading to kinematic coupling between limbs that restricts development of the mechanism. This paper aims at dealing with kinematic coupling between limbs by investigating the transferability of limb constraints and their degrees of relevance to the platform constraints based on the geometric model of the mechanism. The paper applies screw-system theory to verifying the degree of relevance between limb constraint wrenches and platform constraint wrenches, and reveals the transferability of limb constraints, to obtain the final resultant wrenches and twists of the end effector. The proposed method is extended to parallel mechanisms with planar n-bar reconfigurable platforms, spherical n-bar reconfigurable platforms, and other spatial reconfigurable platforms and lends itself to a way of studying a parallel mechanism with a reconfigurable platform.

scholarly journals Trajectory Planning Based on Screw Theory with Consideration of the Optimal Berth Position for a Space Robot

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Yong Wang ◽  
Ying Liao ◽  
Kejie Gong
Keyword(s):  
Trajectory Planning ◽  
Screw Theory ◽  
Optimization Method ◽  
Euler Method ◽  
Space Robot ◽  
Optimization Strategy ◽  
Generalized Jacobian ◽  
End Effector ◽  
Planning Strategy ◽  
Exponential Formula

Trajectory planning is a prerequisite for the tracking control of a free-floating space robot. There are usually multiple planning objectives, such as the pose of the end-effector and the base attitude. In efforts to achieve these goals, joint variables are often taken as exclusive operable parameters, while the berth position is neglected. This paper provides a novel trajectory planning strategy that considers the berth position by applying screw theory and an optimization method. First, kinematic equations at the position level are established on the basis of the product of exponential formula and the conservation of the linear momentum of the system. Then, generalized Jacobian matrices of the base and end-effector are derived separately. According to the differential relationship, an ordinary differential equation for the base attitude is established, and it is solved by the modified Euler method. With these sufficient and necessary preconditions, a parametric optimization strategy is proposed for two trajectory planning cases: zero attitude disturbance and attitude adjustment of the base. First, the berth position is transformed into the desired position of the end-effector, and its constraints are described. Joint variables are parameterized using a sinusoidal function combined with a five-order polynomial function. Then, objective functions are constructed. Finally, a genetic algorithm with a modified mutation operator is used to solve this optimization problem. The optimal berth position and optimized trajectory are obtained synchronously. The simulation of a planar dual-link space robot demonstrates that the proposed strategy is feasible, concise, and efficient.

Sign in / Sign up

Export Citation Format

Share Document