scholarly journals The Global Survey of the Electrical Energy Distribution System: A Review

2019 ◽  
Vol 9 (4) ◽  
pp. 2247 ◽  
Author(s):  
Archana Sudhakar Talhar ◽  
Sanjay B. Bodkhe
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Electrical Energy ◽  
Clean Energy ◽  
Central Intelligence Agency ◽  
Energy Sources ◽  
Power Sources ◽  
Energy Scenario ◽  
The World

This paper gives a review of energy scenario in India and other countries. Today’s demand of the world is to minimize greenhouse gas emissions, during the production of electricity. Henceforth over the world, the production of electrical power is changing by introducing abundantly available renewable energy sources like sun and wind. But, because of the intermittent nature of sustainable power sources, the electrical power network faces many problems, during the transmission and distribution of electricity. For resolving these issues, Electrical Energy Storage (EES) is acknowledged as supporting technology. This paper discusses about the world electrical energy scenario with top renowned developed countries in power generation and consumption. Contribution of traditional power sources changed after the introduction of renewable energy sources like sun and wind. Worldwide Agencies are formed like International Energy Agency (IEA), The Central Intelligence Agency, (CIS) etc. The main aim of these agencies is to provide reliable, affordable and clean energy. This paper will discuss about the regulatory authority and government policies/incentives taken by different countries.  At the end of this paper, author focuses on obstacles in implementation, development and benefits of renewable energy.

Seamless Control and Unified Dynamic Energy Management in a Renewable/Clean Energy Integrated Self-Reliant DC Microgrid

2021 ◽  
pp. 1083-1122
Author(s):  
Vulisi Narendra Kumar ◽  
Gayadhar Panda ◽  
Bonu Ramesh Naidu
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Clean Energy ◽  
High Gain ◽  
Energy Sources ◽  
Dc Microgrid ◽  
Dc Power ◽  
Terminal Voltage ◽  
Operating Constraints

The growing demand for electrical energy calls for the assimilation of renewable energy sources to the main utility grid. Multiple renewable energy sources (RESs) like solar PV array, wind turbine, micro-hydro plant, etc. can be combined and controlled to form a microgrid. In spite of the availability of different microgrid topologies, DC microgrid largely facilitates the injection of DC power from various renewable energy sources into the stabilised DC power pool. The requirement for a minimal number of conversion stages, simple structure, economic operation, and numerous localised applications are driving factors for the DC microgrid technology. The mettle of the DC microgrid technology lies in choosing the appropriate microgrid participants for energy interchange and the suitable supervisory control to tap power from the microgrid partakers even after respecting their operating constraints. The use of high gain DC-DC converters is inevitable in DC microgrid due to the low terminal voltage levels of different RESs.

Conversion of Electrical Power from Renewable Energy Sources

2010 ◽  
pp. 231-247
Keyword(s):  
Renewable Energy ◽  
Industrial Development ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Direct Generation ◽  
Oil Gas

Towards the end of the previous century, the humanity understood very clearly two facts – first, the World supplies of fossil fuels (coal, oil, gas, uranium) are limited, and, second, industrial development and classical generation of electrical energy seriously endanger the environment. Renewable energy sources (sun energy, wind energy, bio fuels, etc.) are based on the use of natural fluxes of energy (Masters,2004). That is why they are considered to be inexhaustible. In specific cases of implementations, for example in lighting, a direct generation of electrical energy using photovoltaics is outlined as a long-term one.

Seamless Control and Unified Dynamic Energy Management in a Renewable/Clean Energy Integrated Self-Reliant DC Microgrid

2022 ◽  
pp. 253-292
Author(s):  
Vulisi Narendra Kumar ◽  
Gayadhar Panda ◽  
Bonu Ramesh Naidu
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Clean Energy ◽  
High Gain ◽  
Energy Sources ◽  
Dc Microgrid ◽  
Dc Power ◽  
Terminal Voltage ◽  
Operating Constraints

The growing demand for electrical energy calls for the assimilation of renewable energy sources to the main utility grid. Multiple renewable energy sources (RESs) like solar PV array, wind turbine, micro-hydro plant, etc. can be combined and controlled to form a microgrid. In spite of the availability of different microgrid topologies, DC microgrid largely facilitates the injection of DC power from various renewable energy sources into the stabilised DC power pool. The requirement for a minimal number of conversion stages, simple structure, economic operation, and numerous localised applications are driving factors for the DC microgrid technology. The mettle of the DC microgrid technology lies in choosing the appropriate microgrid participants for energy interchange and the suitable supervisory control to tap power from the microgrid partakers even after respecting their operating constraints. The use of high gain DC-DC converters is inevitable in DC microgrid due to the low terminal voltage levels of different RESs.

scholarly journals Challenges in Integrating Renewable Sources into a Utility Grid

2020 ◽  
Vol 9 (3) ◽  
pp. 91-97
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Clean Energy ◽  
Energy Sources ◽  
Electrical Power System ◽  
Renewable Sources ◽  
Utility Grid

In India, Electrical Power System is adapted to handle both constant loads and variable loads, also power is generated in two types; one is due to fossil fuels, and another one is due to renewable energy sources. However, renewable energy sources are playing a vital role in the production of clean energy and also useful for the reduction in greenhouse emission. Nevertheless, when there is any additional change in the generation side concerning to input supply, which is due to the uncertainty of nature, can create new challenges for the system operators and utility centers. It is not an easy task for the utility centres and supply operators to integrate variable renewable energy sources with the utility grid. This paper explores an overview of some operational techniques and solutions, which are helpful for high penetration of renewable energy sources such as solar and wind energy. It also explores operation, control management and challenges due to renewable energy when they integrated with the utility grid. By interfacing of renewable energy sources with a utility grid with proper management and control can provide bi-directional communication between suppliers and consumers smartly. The aim of integrating large scale renewable sources from transmission and distribution network into an existing system is to reduce the power quality issues, demand response, forecasting, peak demand, and improve network security, fast scheduling and dispatch, aiming towards smart grid technology for electrical power systems.

Seamless Control and Unified Dynamic Energy Management in a Renewable/Clean Energy Integrated Self-Reliant DC Microgrid

2018 ◽  
pp. 511-551
Author(s):  
Vulisi Narendra Kumar ◽  
Gayadhar Panda ◽  
Bonu Ramesh Naidu
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Clean Energy ◽  
High Gain ◽  
Energy Sources ◽  
Dc Microgrid ◽  
Dc Power ◽  
Terminal Voltage ◽  
Operating Constraints

The growing demand for electrical energy calls for the assimilation of renewable energy sources to the main utility grid. Multiple renewable energy sources (RESs) like solar PV array, wind turbine, micro-hydro plant, etc. can be combined and controlled to form a microgrid. In spite of the availability of different microgrid topologies, DC microgrid largely facilitates the injection of DC power from various renewable energy sources into the stabilised DC power pool. The requirement for a minimal number of conversion stages, simple structure, economic operation, and numerous localised applications are driving factors for the DC microgrid technology. The mettle of the DC microgrid technology lies in choosing the appropriate microgrid participants for energy interchange and the suitable supervisory control to tap power from the microgrid partakers even after respecting their operating constraints. The use of high gain DC-DC converters is inevitable in DC microgrid due to the low terminal voltage levels of different RESs.

scholarly journals Performance Analysis of Photovoltaic Passive Heat Storage System with Microencapsulated Paraffin Wax for Thermoelectric Generation

2021 ◽  
Vol 1 (1) ◽  
pp. 75-90
Author(s):  
Mohamed Nazer ◽  
Muhammad Fadzrul Hafidz Rostam ◽  
Se Yong Eh Noum ◽  
Mohammad Taghi Hajibeigy ◽  
Kamyar Shameli
Keyword(s):  
Renewable Energy ◽  
Heat Storage ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Electrical Power ◽  
Paraffin Wax ◽  
Energy Sources ◽  
Thermoelectric Generation ◽  
Power Sources ◽  
Pv Panel

The depletion of non-renewable energy sources and negative effects towards the environment push research towards the widespread adoption of renewable energy sources such as solar energy. The main drawback of solar panels is that temperatures above 27°C will result in an efficiency drop of 0.1-0.5%/°C. In previous studies, usage of photovoltaic thermal (PVT) systems was mainly for the purpose of heating water, warming buildings, and drying crops. This research will focus on the usage of a standalone PVT and thermoelectric generator (TEG) system whereby it uses heat extracted from the PVT system for thermoelectric generation. A passive standalone PVT-TEG system design with microencapsulated paraffin wax as a phase change material (PCM) as a heat storage medium was created. The heat stored in the PCM is used as a heat source for thermoelectric generation. To extract the heat from the PV panel, an aluminum heatsink underneath the PV panel is used as a heat absorber to passively extract heat without external power sources. This setup reduces the surface temperature by 22.7°C. Transient thermal analysis and thermoelectric simulation of the system was conducted through Computational Fluid Dynamics (CFD) using ANSYS 2019 software. The error recorded between the experimental and simulation results was 4.2%. This proposed system panel successfully increased the electrical efficiency of the PV panel by approximately 12.8%, where the overall electrical power produced shows a significant increase from 7.7W to 17.7W.

scholarly journals Analisis Karakteristik Kelistrikan Campuran Belimbing Wuluh dan Jeruk Lemon Sebagai Sumber Listrik

2020 ◽  
Vol 8 (2) ◽  
pp. 189-194
Author(s):  
Dady Sulaiman ◽  
◽  
Wibowo Romadhoni ◽  
Arlina Arlina ◽  
◽  
...  
Keyword(s):  
Renewable Energy ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Average Power ◽  
Electrical Energy ◽  
Graphical Form ◽  
Energy Sources ◽  
Citrus Limon ◽  
Electrolysis Method

Electrical energy is one of the primer facilities used in every activity. Almost all the existing facilities use electricity. This is inversely proportional to the depleting energy source. The solution to this problem is to replace fossil fuels with renewable energy sources. Renewable energy is a source of energy that can be recycled and does not damage the environment. One type of renewable energy is to use the electrolysis method. Electrolysis Method is one of the renewable energy sources. This method uses electrolyte solution which can be found in sour and runny fruit such as lemon (Citrus Limon L.) and Wuluh Star fruit (Averrhoa bilimbi). The study was conducted in a laboratory by mixing the results of the juice of the two fruits with different compositions. The mixes are placed in the arcs (a mixture container to test the electrical properties) and then tested using a multimeter every 2 hours for 24 hours. The results are described in graphical form. The average power of each mixture is, C1 = 2.2mW, C2 = 4.7mW, and C3 = 8.5 mW and based on the graph, each mixture has decreased voltage and current. Even so among the three mixtures, the third mixture has a better electrical power value than the other two mixes. This shows that the higher the acidity of a solution the higher the electricity produced.

Power Projects and Covid-19: A Practical Analysis of the Relevance of Force Majeure Clauses under the Standardised Power Purchase and Implementation Agreements of Uganda

2020 ◽  
Vol 1 (2) ◽  
pp. 189-193
Author(s):  
Aisha Naiga ◽  
Loyola Rwabose Karobwa
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Clean Energy ◽  
The State ◽  
Energy Sources ◽  
Policy Goals ◽  
Force Majeure ◽  
Practical Analysis ◽  
Energy Justice

Over 90% of Uganda's power is generated from renewable sources. Standardised Implementation Agreements and Power Purchase Agreements create a long-term relationship between Generating Companies and the state-owned off-taker guaranteed by Government. The COVID-19 pandemic and measures to curb the spread of the virus have triggered the scrutiny and application of force majeure (FM) clauses in these agreements. This article reviews the FM clauses and considers their relevance. The authors submit that FM clauses are a useful commercial tool for achieving energy justice by ensuring the continuity of the project, despite the dire effects of the pandemic. Proposals are made for practical considerations for a post-COVID-19 future which provides the continued pursuit of policy goals of promoting renewable energy sources and increasing access to clean energy, thus accelerating just energy transitions.

scholarly journals Forecasting and Modelling the Uncertainty of Low Voltage Network Demand and the Effect of Renewable Energy Sources

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2151
Author(s):  
Feras Alasali ◽  
Husam Foudeh ◽  
Esraa Mousa Ali ◽  
Khaled Nusair ◽  
William Holderbaum
Keyword(s):  
Renewable Energy ◽  
Low Voltage ◽  
Renewable Energy Sources ◽  
Golden Ratio ◽  
Clean Energy ◽  
Energy Sources ◽  
Percentage Error ◽  
Ann Model ◽  
Demand Forecast ◽  
Pv System

More and more households are using renewable energy sources, and this will continue as the world moves towards a clean energy future and new patterns in demands for electricity. This creates significant novel challenges for Distribution Network Operators (DNOs) such as volatile net demand behavior and predicting Low Voltage (LV) demand. There is a lack of understanding of modern LV networks’ demand and renewable energy sources behavior. This article starts with an investigation into the unique characteristics of householder demand behavior in Jordan, connected to Photovoltaics (PV) systems. Previous studies have focused mostly on forecasting LV level demand without considering renewable energy sources, disaggregation demand and the weather conditions at the LV level. In this study, we provide detailed LV demand analysis and a variety of forecasting methods in terms of a probabilistic, new optimization learning algorithm called the Golden Ratio Optimization Method (GROM) for an Artificial Neural Network (ANN) model for rolling and point forecasting. Short-term forecasting models have been designed and developed to generate future scenarios for different disaggregation demand levels from households, small cities, net demands and PV system output. The results show that the volatile behavior of LV networks connected to the PV system creates substantial forecasting challenges. The mean absolute percentage error (MAPE) for the ANN-GROM model improved by 41.2% for household demand forecast compared to the traditional ANN model.

Power Cycles of Generation III and III+ Nuclear Power Plants

2014 ◽  
Author(s):  
Alexey Dragunov ◽  
Eugene Saltanov ◽  
Igor Pioro ◽  
Pavel Kirillov ◽  
Romney Duffey
Keyword(s):  
Renewable Energy ◽  
Natural Gas ◽  
Thermal Efficiency ◽  
Nuclear Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Thermal Power Plants

It is well known that the electrical-power generation is the key factor for advances in any other industries, agriculture and level of living. In general, electrical energy can be generated by: 1) non-renewable-energy sources such as coal, natural gas, oil, and nuclear; and 2) renewable-energy sources such as hydro, wind, solar, biomass, geothermal and marine. However, the main sources for electrical-energy generation are: 1) thermal - primary coal and secondary natural gas; 2) “large” hydro and 3) nuclear. The rest of the energy sources might have visible impact just in some countries. Modern advanced thermal power plants have reached very high thermal efficiencies (55–62%). In spite of that they are still the largest emitters of carbon dioxide into atmosphere. Due to that, reliable non-fossil-fuel energy generation, such as nuclear power, becomes more and more attractive. However, current Nuclear Power Plants (NPPs) are way behind by thermal efficiency (30–42%) compared to that of advanced thermal power plants. Therefore, it is important to consider various ways to enhance thermal efficiency of NPPs. The paper presents comparison of thermodynamic cycles and layouts of modern NPPs and discusses ways to improve their thermal efficiencies.

Sign in / Sign up

Export Citation Format

Share Document