scholarly journals Enhancement of the power system distribution reliability using ant colony optimization and simulated annealing methods

2020 ◽  
Vol 17 (2) ◽  
pp. 877 ◽  
Author(s):  
Hadi Suyono ◽  
Rini Nur Hasanah ◽  
Panca Mudjirahardjo ◽  
M Fauzan Edy Purnomo ◽  
Septi Uliyani ◽  
...  
Keyword(s):  
Simulated Annealing ◽  
Power System ◽  
Ant Colony Optimization ◽  
Power Distribution ◽  
Distribution System ◽  
Ant Colony ◽  
Service Reliability ◽  
Power Distribution System ◽  
Reliability Indices ◽  
Base Reference

<span>The increasing demand of electricity and number of distributed generations connected to power system greatly influence the level of power service reliability. This paper aims at improving the reliability in an electric power distribution system by optimizing the number and location of sectionalizers using the Ant Colony Optimization (ACO) and Simulated Annealing (SA) methods. Comparison of these two methods has been based on the reliability indices commonly used in distribution system: SAIFI, SAIDI, and CAIDI. A case study has been taken and simulated at a feeder of Pujon, a place in East Java province of Indonesia, to which some distributed generators were connected. Using the existing reliability indices condition as base reference, the addition of two distributed plants, which were micro hydro and wind turbine plants, has proven to lower the indices as much as 0.78% for SAIFI, 0.79% for SAIDI, and 2.32% for CAIDI. The optimal relocation of the existing 16 sectionalizers in the network proved to decrease further the reliability indices as much as 43.96% for SAIFI, 45.52% for SAIDI, and 2.8% for CAIDI, which means bringing to much better reliability condition. The implementation of the SA method on the considered data in general resulted in better reliability indices than using the ACO method.</span>

scholarly journals Flexibility Enhancement in an Islanded Distribution Power System by Online Demand-Side Management

2019 ◽  
Vol 217 ◽  
pp. 01020 ◽  
Author(s):  
Margarita Chulyukova ◽  
Nikolai Voropai
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Load Shedding ◽  
Load Management ◽  
Daily Maximum ◽  
Power Distribution Systems ◽  
Power Distribution System ◽  
Islanded Operation

The paper considers the possibilities of increasing the flexibility of power distribution systems by real-time load management. The principles of the implementation of special automatic systems for this purpose are proposed. These systems enable some loads of specific consumers of the power distribution system switched to islanded operation to “shift” from the daily maximum to the minimum, which makes some generators available to connect certain essential consumers disconnected earlier by under-frequency load shedding system to the power system. The approach under consideration is illustrated by a power system with distributed generation.

Impact of Distributed Generation on the Fault Current in Power Distribution System

2017 ◽  
Vol 6 (2) ◽  
pp. 357
Author(s):  
Zuhaila Mat Yasin ◽  
Izni Nadhirah Sam’ón ◽  
Norziana Aminudin ◽  
Nur Ashida Salim ◽  
Hasmaini Mohamad
Keyword(s):  
Power System ◽  
Distributed Generation ◽  
Power Distribution ◽  
Distribution System ◽  
Test System ◽  
Optimal Location ◽  
Fault Current ◽  
Double Line ◽  
Power Distribution System ◽  
The Impact

<p>Monitoring fault current is very important in power system protection. Therefore, the impact of installing Distributed Generation (DG) on the fault current is investigated in this paper. Three types of fault currents which are single line-to-ground, double line-to-ground and three phase fault are analyzed at various fault locations. The optimal location of DG was identified heuristically using power system simulation program for planning, design and analysis of distribution system (PSS/Adept). The simulation was conducted by observing the power losses of the test system by installing DG at each load buses. Bus with minimum power loss was chosen as the optimal location of DG. In order to study the impact of DG to the fault current, various locations and sizes of DG were also selected. The simulations were conducted on IEEE 33-bus distribution test system and IEEE 69-bus distribution test system. The results showed that the impact of DG to the fault current is significant especially when fault occurs at busses near to DG location.</p>

Design of Low-Voltage Power Distribution System

2013 ◽  
Vol 791-793 ◽  
pp. 1889-1891
Author(s):  
Yan Li Fan ◽  
Qing En Li
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Low Voltage ◽  
Electrical Power ◽  
Scientific Basis ◽  
Voltage Distribution ◽  
Electrical Power System ◽  
Power Distribution System ◽  
High Rise

The low-voltage distribution system is the key component of the electrical power system. Some analysis and research of the low-voltage distribution system is carried out in this paper, which provides some scientific basis to design the low-voltage distribution system. Firstly, the summarize of low-voltage distribution system is taken. The influence to productions and livings of low-voltage distribution system is introduced. Secondly, the mode of connection and design philosophy of low-voltage distribution system is studied in detail, especially the high-rise buildings low-voltage distribution system is concluded and summarized.

scholarly journals Review of Steady-State Electric Power Distribution System Datasets

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4826
Author(s):  
Steffen Meinecke ◽  
Leon Thurner ◽  
Martin Braun
Keyword(s):  
Steady State ◽  
Power Systems ◽  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
New Technologies ◽  
Electrical Power ◽  
Background Information ◽  
Electrical Power Systems ◽  
Power Distribution System

Publicly available grid datasets with electric steady-state equivalent circuit models are crucial for the development and comparison of a variety of power system simulation tools and algorithms. Such algorithms are essential to analyze and improve the integration of distributed energy resources (DERs) in electrical power systems. Increased penetration of DERs, new technologies, and changing regulatory frameworks require the continuous development of the grid infrastructure. As a result, the number and versatility of grid datasets, which are required in power system research, increases. Furthermore, the used grids are created by different methods and intentions. This paper gives orientation within these developments: First, a concise overview of well-known, publicly available grid datasets is provided. Second, background information on the compilation of the grid datasets, including different methods, intentions and data origins, is reviewed and characterized. Third, common terms to describe electric steady-state distribution grids, such as representative grid or benchmark grid, are assembled and reviewed. Recommendations for the use of these grid terms are made.

scholarly journals A comparative study on common power flow techniques in the power distribution system of the Tehran metro

2018 ◽  
Vol 12 (4) ◽  
pp. 244-250 ◽  
Author(s):  
Mohammad Ghiasi
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
Power Flow ◽  
Flow Analysis ◽  
Electrical Energy ◽  
Power Grids ◽  
Power Distribution System ◽  
Detailed Assessment ◽  
Flow Techniques

Overall, a power-flow study is a steady-state assessment whose goal is to specify the currents, voltages, and real and reactive flows in a power system under a given load conditions. This paper presents a comparison of common power flow techniques in the Tehran metro power distribution system at the presence of non-linear loads. Moreover, a modelling, simulation and analysis of this power distribution system is implemented with the Electrical Transient Analyser Program (ETAP) software. In this assessment, common power flow techniques including the Newton-Raphson (NR), Fast Decoupled (FD), and Accelerated Gauss-Seidel (AGS) techniques are provided and compared. The obtained results (total generation, loading, demand, system losses, and critical report of the power flow) are analysed. In this paper, we focus on the detailed assessment and monitoring by using the most modern ETAP software, which performs numerical calculations of a large integrated power system with fabulous speed and also generates output reports. The capability and effectiveness of the power flow analysis are demonstrated according to the simulation results obtained with ETAP by applying it to the power distribution system of the Tehran metro. In developing countries such as Iran, off-line modelling and simulation of power grids by a powerful software are beneficial and helpful for the best usage of the electrical energy.

The Design Based on Integrated Criterion to Faulty Line Selection for Small Current Neutral Grounding System

2014 ◽  
Vol 529 ◽  
pp. 511-515
Author(s):  
Han Mei Hu ◽  
Qin Feng Li ◽  
Bo Hong ◽  
Nian Fang
Keyword(s):  
Power System ◽  
Power Distribution ◽  
Distribution System ◽  
High Efficiency ◽  
Fault Line ◽  
Small Current ◽  
Grounding System ◽  
Power Distribution System ◽  
Line Selection ◽  
Selection For

Small current neutral grounding system is widely used in 3~66 kV power distribution system in China. In this power system, the single-phase to-earth fault occurs frequently in distribution, thus how to detect the fault line with great accuracy and high efficiency is an important subject in protective relaying of power system. According to a variety of existing theories of fault line selection for small-current neutral grounding system, this paper presents a new design based on integrated criterion, which has been applied in actual production.

Sign in / Sign up

Export Citation Format

Share Document