scholarly journals Evaluation of DC-DC converter using renewable energy sources

Author(s):  
Rajapandian B ◽  
Sundarrajan G.T

This work analyses and evaluates the performance of renewable energy sources-based converters using Intelligent techniques. The objective of the research is to maintain the reliability of the converters such that it decreases the switching losses, high duty cycle and recycles the leakage energy. To accomplish the high output voltage gain converters are designed with different intelligent methods. Due to heavy demands, the cost of fossil fuel has gone up.so the need for the time is identifying and developing renewable energy sources along with developing new technologies for energy saving in renewable energy system to fight the issues plaguing the environment.

As the demand for electrical energy increases continuously, we cannot rely on the existing conventional source for continuous power supply, as they are diminishing fast. The renewable energy sources are the best alternative for this energy crisis. We have different types of renewable energy sources and choice of source depends on location and load requirement. The most prominent source is the solar energy because of its own advantages. The nature of supply from this source is DC and it is to be converted into AC for supply to consumers. However, inverters are used for this conversion but produces harmonics. The Multilevel inverters are the alternate choice over conventional inverters due to the advantages of Low dv/dt and lower switching losses. Out of various multilevel inverters, cascaded H bridge (CHB) MLI topology is a well known solution for reducing the harmonics, which needs more number of switches and isolation power supplies which further increases the cost. This paper describes a proposed hybrid H-bridge topology with reduced switches. The proposed topology is implemented in Matlab/Simulink and results for 5, 7, 9 and 11 level are analyzed with their THD in output voltage. Hardware model for 5-level inverter is developed using 8051 micro-controller and results are presented


2021 ◽  
Vol XXIII (4) ◽  
pp. 64-69
Author(s):  
Goran Rimac

Until recently, the prevailing idea was that for the functioning of the energy system it is necessary to be composed of large plants and for energy to move from the centre of production to cities and places of consumption. With the advent of decentralized energy production systems and new technologies for their use, the original model is changing more and more. EU Directive 2018/2001 on the promotion of the use of renewable energy sources (RES) designates “prosumers”, i.e. at the same time both producers and consumers of renewable energy, as well as RES communities, while EU Directive 2019/944 introduced the term “citizen energy communities”, i.e. civil energy communities, provided that this Directive, in addition to the distributive production of electricity from RES, also includes electricity from other sources. EU member states are obliged to adopt their own regulations regarding the implementation of the directives, and after that the appropriate incentive measures. The Energy Communities initiative offers citizens new opportunities in terms of active involvement in energy issues. As they are decentralized RES-based projects, they promote the practice of sustainable energy production and consumption, as well as energy storage and exchange within the community. Traditionally passive consumer becomes an energy “prosumer”, a co-owner of a RES plant and a member of the energy community. There are thousands of so-called RES cooperatives in Europe, which are the most common organizational form of energy communities and can play an important role in the process of decentralization of the energy system. The transition to decentralized energy production has many advantages, namely: the use of local energy sources, increased security of local energy supply, shorter transport distances and reduced losses in energy transmission, encouraging community development and creating local jobs. The purpose of this paper is to bring closer to the general public in Serbia the concept of energy communities, what they are and what their role is, with most of the work dealing with energy communities in the EU.


2020 ◽  
Vol 9 (3) ◽  
pp. 735
Author(s):  
Assem S. BAKTYMBET ◽  
Saule S. BAKTYMBET ◽  
Rakymzhan K. YELSHIBAYEV ◽  
Galiya S. UKUBASSOVA ◽  
Aisara S. BAKTYMBET

The relevance of the subject matter is conditioned upon the fact that currently the main direction of global energy development is already clearly visible: under the influence of changes in energy policy and the development of new technologies, the world is entering the stage of the fourth energy transition to the widespread use of renewable energy sources and displacement of fossil fuels. The development of Kazakhstan's economy requires the transition of energy towards clean and safe renewable sources, which will let the country build a new strong economy and break out of the long-running socio-economic decline, help the international community solve the problem of climate change and improve the safety and welfare of its citizens. The purpose of the study: The purpose of the paper is to develop recommendations for the development of Kazakhstan's energy industry at a new stage in the fundamental transformation of the global energy system. Leading approach to researching the problem. The leading methods of researching the problems of the paper include the analysis of theoretical sources, analysis of statistics, and comparison. Analysis of statistical indicators plays a crucial role in the study, since data on the development of Kazakhstan's energy industry can be directly obtained from statistical databases. The results of the study. The paper discusses the essence of the fourth energy transition, its main aspects, explores renewable energy sources, identifies the features and problems of Kazakhstan's energy industry, and develops ways to solve them. Prospects for further research. To implement the modern provisions of the fourth energy transition in Kazakhstan, it is necessary to use a systematic approach. The basic elements of such a transition are the introduction of renewable energy and energy efficiency (the intensification of reducing the energy intensity of goods and services). The materials of the paper are of practical value for the development of Kazakhstan’s energy during the period of fundamental structural transformations of the world energy sector.  


Land ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 682
Author(s):  
Zita Szabó ◽  
Viola Prohászka ◽  
Ágnes Sallay

Nowadays, in the context of climate change, efficient energy management and increasing the share of renewable energy sources in the energy mix are helping to reduce greenhouse gases. In this research, we present the energy system and its management and the possibilities of its development through the example of an ecovillage. The basic goal of such a community is to be economically, socially, and ecologically sustainable, so the study of energy system of an ecovillage is especially justified. As the goal of this community is sustainability, potential technological and efficiency barriers to the use of renewable energy sources will also become visible. Our sample area is Visnyeszéplak ecovillage, where we examined the energy production and consumption habits and possibilities of the community with the help of interviews, literature, and map databases. By examining the spatial structure of the settlement, we examined the spatial structure of energy management. We formulated development proposals that can make the community’s energy management system more efficient.


2018 ◽  
Vol 58 ◽  
pp. 03006 ◽  
Author(s):  
Bekzhan Mukatov ◽  
Ravil Khabibullin

The article describes the main factors determining the development of renewable energy sources in the world. The assessment of the applicability of foreign RES development strategies to Kazakhstan’s energy system has been made. The main tasks facing Kazakhstan’s energy system with large-scale implementation of renewable energy were formulated. On the basis of the analysis and performed calculations recommendations and basic principles have been made on development strategy of renewable energy sources in the Republic of Kazakhstan.


2013 ◽  
Vol 768 ◽  
pp. 3-8 ◽  
Author(s):  
M. Venmathi ◽  
R. Ramaprabha

This paper presents the comparative dynamic analysis of full bridge and half bridge three port dc-dc converter topology interfacing the renewable energy sources along with the energy storage devices. The three port converter comprises the active bridge circuit and the three winding transformer. It uses single power conversion stage with high frequency link to control power flow between the batteries, load and the renewable energy sources. The power flow between the ports is controlled by phase shifting the square wave outputs of the active bridges in combination with pulse width modulation (PWM) technique. The analysis reveals that the battery discharges when the source is not sufficient to supply the load and it was charged when the source alone is capable of supplying the load. Hence there is a bidirectional power flow in the storage port when there is a transition in the source.


Author(s):  
Ioannis Panapakidis ◽  
Georgios Gousis ◽  
Nikolaos Koltsaklis ◽  
Athanasios Dagoumas

Energies ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 182 ◽  
Author(s):  
Lukas Kriechbaum ◽  
Thomas Kienberger

In developed countries like Austria the renewable energy potential might outpace the demand. This requires primary energy efficiency measures as well as an energy system design that enables the integration of variable renewable energy sources. Municipal energy systems, which supply customers with heat and electricity, will play an important role in this task. The cumulative exergy consumption methodology considers resource consumption from the raw material to the final product. It includes the exergetic expenses for imported energy as well as for building the energy infrastructure. In this paper, we determine the exergy optimal energy system design of an exemplary municipal energy system by using cumulative exergy consumption minimisation. The results of a case study show that well a linked electricity and heat system using heat pumps, combined heat power plants and battery and thermal storages is necessary. This enables an efficient supply and also provides the necessary flexibilities for integrating variable renewable energy sources.


2020 ◽  
Vol 10 (18) ◽  
pp. 6398
Author(s):  
Meysam Majidi Nezhad ◽  
Riyaaz Uddien Shaik ◽  
Azim Heydari ◽  
Armin Razmjoo ◽  
Niyazi Arslan ◽  
...  

The elaboration of a methodology for accurately assessing the potentialities of blue renewable energy sources is a key challenge among the current energy sustainability strategies all over the world. Consequentially, many researchers are currently working to improve the accuracy of marine renewable assessment methods. Nowadays, remote sensing (RSs) satellites are used to observe the environment in many fields and applications. These could also be used to identify regions of interest for future energy converter installations and to accurately identify areas with interesting potentials. Therefore, researchers can dramatically reduce the possibility of significant error. In this paper, a comprehensive SWOT (strengths, weaknesses, opportunities and threats) analysis is elaborated to assess RS satellite potentialities for offshore wind (OW) estimation. Sicily and Sardinia—the two biggest Italian islands with the highest potential for offshore wind energy generation—were selected as pilot areas. Since there is a lack of measuring instruments, such as cup anemometers and buoys in these areas (mainly due to their high economic costs), an accurate analysis was carried out to assess the marine energy potential from offshore wind. Since there are only limited options for further expanding the measurement over large areas, the use of satellites makes it easier to overcome this limitation. Undoubtedly, with the advent of new technologies for measuring renewable energy sources (RESs), there could be a significant energy transition in this area that requires a proper orientation of plans to examine the factors influencing these new technologies that can negatively affect most of the available potential. Satellite technology for identifying suitable areas of wind power plants could be a powerful tool that is constantly increasing in its applications but requires good planning to apply it in various projects. Proper planning is only possible with a better understanding of satellite capabilities and different methods for measuring available wind resources. To this end, a better understanding in interdisciplinary fields with the exchange of updated information between different sectors of development, such as universities and companies, will be most effective. In this context, by reviewing the available satellite technologies, the ability of this tool to measure the marine renewable energies (MREs) sector in large and small areas is considered. Secondly, an attempt is made to identify the strengths and weaknesses of using these types of tools and techniques that can help in various projects. Lastly, specific scenarios related to the application of such systems in existing and new developments are reviewed and discussed.


Sign in / Sign up

Export Citation Format

Share Document