1. Takachiho: The Floating Bridge Of Heaven

2009 ◽  
pp. 1-24
Keyword(s):  
Floating Bridge

BRIDGE BUILDING AS A PROBLEM OF URBAN INFRASTRUCTURE DEVELOPMENT IN THE EUROPEAN NORTH OF RUSSIA IN THE EARLY XX CENTURY

2019 ◽  
Vol 15 (2) ◽  
pp. 125-135
Author(s):  
Tatiana S. Minaeva ◽  
Sergey S. Gulyaev
Keyword(s):  
Urban Infrastructure ◽  
Local Administration ◽  
Infrastructure Development ◽  
European North ◽  
Long Time ◽  
History Of ◽  
Floating Bridge ◽  
Historical Comparative ◽  
Bridge Building ◽  
Xix Century

Introduction. The organization of transport links and the bridge building in cities located on the banks of wide rivers has always been one of the most important tasks of the local administration. The study of the history of bridge building allows not only to trace the process of modernization of different regions of the country, but also to help in solving similar problems of our time. Nevertheless, the history of Russian bridge building is poorly studied. The purpose of the article is to determine the characteristics and features of the organization of bridge building in big cities of the European North of Russia as a way to solve one of the problems of urban infrastructure in the early XX century. Materials and Methods. The sources for this study are the documents of the State archive of the Arkhangelsk region, published documents on the history of Vologda, articles in the local periodicals of the early XX century. The analysis of the studied problem used a systematic approach, the method of economic analysis, historical and historical-comparative methods. Results and Discussion. The building of permanent bridges was a need for the development of Arkhangelsk and Vologda. In Vologda the two wooden bridges were built in the middle of XIX century on city funds and in the future these bridges were repaired or rebuilt. The Arkhangelsk city authorities did not hurry to solve a problem of city infrastructure by own efforts and a long time they used the floating bridge. The lack of experience in the building of large bridges and the desire to save money led to the rapid destruction of the first permanent bridge in Arkhangelsk. Conclusion. The Development of trade and industry in cities of the European North of Russia, such as Arkhangelsk and Vologda, led to the expansion of their territory and the emergence over time, the so-called third parts of the cities. Despite the comparable size of the population of the districts located across the river, the process of connecting them with bridges to the rest of the city went at different rates, which depended on the attitude of the local administration to the problem of urban infrastructure.

Modular Bridge Expansion Joints for Lacey V. Murrow Floating Bridge

1997 ◽  
Vol 1594 (1) ◽  
pp. 163-171 ◽  
Author(s):  
John A. Van Lund ◽  
Mark R. Kaczinski ◽  
Robert J. Dexter
Keyword(s):  
Fatigue Strength ◽  
Fatigue Cracking ◽  
Field Measurements ◽  
The United States ◽  
Limit States ◽  
Expansion Joints ◽  
Lake Washington ◽  
Floating Bridge ◽  
Modular Bridge Expansion Joints ◽  
Washington State Department

The Lacey V. Murrow Bridge (LVM Bridge) is a 2013-m-long floating bridge on Interstate 90 across Lake Washington in Seattle, Washington. Single-support-bar, swivel-joist modular bridge expansion joint systems are located at each end of the bridge between the shore approach spans and the floating pontoons. These joints were designed for 960 mm of longitudinal movement as well as horizontal and vertical rotations caused by wind, wave, temperature, and changes in lake level elevation. A similar joint in an adjacent floating bridge had experienced premature fatigue cracking at welded attachment details because of low fatigue strength. For the LVM Bridge the joint components were fatigue tested and designed by using fatigue limit-states loads, resulting in welded attachment details with improved fatigue strength. In addition, a stiffer center beam and reduced center-beam span lengths produced lower fatigue stress ranges. Joint movements and rotations, fatigue design methodology, results of dynamic analyses, field measurements of the dynamic response, and construction details are described. The total cost of the LVM joints was 1 percent of the final bridge cost. The Washington State Department of Transportation required a 5-year guarantee for the LVM joints. These are the largest modular bridge expansion joints in the United States to be tested and designed for fatigue.

scholarly journals Effect of Modelling Inhomogeneous Wave Conditions on Structural Responses of a Very Long Floating Bridge

2021 ◽  
Vol 9 (5) ◽  
pp. 548
Author(s):  
Jian Dai ◽  
Christos Stefanakos ◽  
Bernt J. Leira ◽  
Hagbart Skage Alsos
Keyword(s):  
Water Environment ◽  
Bridge Structure ◽  
Inhomogeneous Wave ◽  
Wave Condition ◽  
Analysis And Design ◽  
Inhomogeneous Waves ◽  
Modelling Analysis ◽  
Structural Responses ◽  
Floating Bridge ◽  
Wave Conditions

Floating bridges are suitable for connecting land parcels separated by wide and deep waterbodies. However, when the span of the crossing becomes very long, the water environment exhibits inhomogeneities which introduce difficulties to the modelling, analysis and design of the bridge structure. The wave inhomogeneity may be described by means of field measurement and/or numerical simulations. Both approaches face complications when the resolution is much refined. It is thus important to examine the effect of the resolution related to the modelling of inhomogeneous waves on the global structural responses. In this study, a hypothetical crossing at the Sulafjord is chosen, and the wave environment in the year 2015 at 10 positions along the crossing is numerically computed. Next, different inhomogeneous wave conditions are established based on the wave data at 3, 5, and 10 positions, respectively. Time-domain simulations are conducted to examine the effect of different modelling approaches of the inhomogeneous wave condition on the global responses of a long, straight and side-anchored floating bridge.

Moving-load-induced vibrations of a moored floating bridge

1998 ◽  
Vol 66 (4) ◽  
pp. 435-461 ◽  
Author(s):  
Jong-Shyong Wu ◽  
Po-Yun Shih
Keyword(s):  
Moving Load ◽  
Floating Bridge

Study on Dynamic Stability of Single Floating Pier Under Waves

2021 ◽  
Author(s):  
Yikuan He ◽  
Bing Han ◽  
Wenyu Ji
Keyword(s):  
Dynamic Stability ◽  
Expansion Method ◽  
Diffraction Effect ◽  
Exterior Region ◽  
Factors Affecting ◽  
Eigenfunction Expansion Method ◽  
Floating Bridge ◽  
Response Equation ◽  
Floating Pier ◽  
Wave Excitation Force

Abstract Considering the upper structure restraint effect of the floating bridge, the diffraction effect and radiation effect of linear monochromatic waves, the dynamic response equation of floating pier is derived and the factors affecting the dynamic stability of the floating pier are analyzed in this paper. Based on the theory of potential flow, the calculation domain is divided into the interior region and the exterior region. The wave diffraction and radiation problems are solved by the matched eigenfunction expansion method (MEEM). After obtaining the wave excitation force, additional mass and radiation damping coefficient, considering the restraint effect of the upper structure of the floating bridge, the motion differential equation of the floating pier is established, and the response amplitude operator (RAOs) of the floating pier is obtained. The effects of span, mass and stiffness of upper structure, as well as the draft depth, size and net height of floating pier on dynamic stability of floating pier under wave are analyzed. The results show that the increase in the span of upper structure will significantly increase the peak RAOs of sway and heave, and the increase in stiffness is helpful to reduce the peak RAOs of sway and heave. The increase of the floating pier radius can reduce the heave RAO, and the net height on the water surface of the floating pier increases the heave and roll.

Design of floating bridge girders against accidental ship collision loads

2016 ◽  
Author(s):  
Yanyan Sha ◽  
Jørgen Amdahl
Keyword(s):  
Finite Element Models ◽  
Cruise Ship ◽  
Box Girder ◽  
Global Response ◽  
Ship Structure ◽  
Steel Box Girder ◽  
Floating Bridge ◽  
Bridge Girder ◽  
Ship Collision ◽  
The Impact

The Norwegian Public Roads Administration is running a project “Ferry free coastal route E39” which includes replacing ferry crossings by bridges or tunnels across fjords in Western Norway. A floating bridge concept was proposed in the fjord-crossing project for Bjørnefjorden. As there are regular cruise routes passing by the bridge, it raises the concern for the consequences of accidental ship collision with the bridge girder. During the collision, the interactions between the bridge girder and the ship structure can be significant. Thus, in the design of the proposed bridge it is vital to evaluate the safety of the ship and the bridge. In this paper, detailed finite element models of a cruise ship and a steel box girder are developed. The impact scenarios and structural damages are studied. The results show that the proposed bridge girder design is generally safe to resist normal accidental ship collision loads. Numerical model of the whole bridge is also developed for further study of bridge global response subjected to ship collision load.

scholarly journals Modeling of Constructions’ Structurally Nonlinear Oscillations Using Chebyshev's Polynomials

Mechanika ◽  
2020 ◽  
Vol 26 (4) ◽  
pp. 331-337
Author(s):  
Sergey Gridnev ◽  
Yuri Skalko ◽  
Alexandr Shimanovsky
Keyword(s):  
Nonlinear Oscillations ◽  
Continuous System ◽  
Initial Boundary ◽  
Nonlinear Boundary Conditions ◽  
Building Structures ◽  
Deformed State ◽  
Floating Bridge ◽  
Elastic Couplings ◽  
Initial Boundary Value ◽  
Rigid Supports

A numerical algorithm for solving initial-boundary value problems with nonlinear boundary conditions was developed and implemented. The algorithm is constructed with reference to modeling of oscillations of an elastically supported deformable rod with limit stops at the ends under the action of a moving variable force. Such a rod is the design scheme of a number of building structures, including the span structure of a floating bridge of continuous system with limiting rigid supports at the ends. Chebyshev's polynomials were used to improve the computational schemes for realizing the practical problems of modeling constructive-nonlinear oscillations of building structures. The solution does not lose stability for large values of the elasticity coefficients of elastic couplings. Using the developed approach, it is possible to perform virtual computing experiments to skip a variety of movable loads on the floating bridge to analyze its deformed state and to make well-grounded design decisions.

Sign in / Sign up

Export Citation Format

Share Document