Ultra Wide Band Multiple Input Multiple Output Antenna for Internet of Things Applications

2020 ◽  
Vol 17 (5) ◽  
pp. 2207-2211
Author(s):  
G. Veerendra Nath ◽  
Pradeep Kumar ◽  
K. Nageswara Rao ◽  
E. Nalin ◽  
G. Harshitha ◽  
...  
Keyword(s):  
Return Loss ◽  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Low Loss ◽  
Adjacent Element ◽  
Mimo Antenna ◽  
Iot Applications ◽  
Large Size ◽  
Multiple Input ◽  
Input Multiple Output

This paper mainly gives information about a compact 4-element multiple input multiple output (MIMO) antenna which is useful for IOT applications. Advantages of the proposed antenna is that it can be easily extendable for a large size array. The array consists of 4 elements placed at an angle of 90 degree to the adjacent element. The substrate used in the design is a low loss laminate of FR4 with dielectric constant of 4.4. Based on the results obtained the antenna covers a UWB band of 2.4 GHz–13.0 GHz and the isolations also exceed 20 dB. Return loss, radiation pattern and isolation is plotted. The simulation results show that the proposed antenna can perform well for MIMO devices. The proposed antenna is much suitable for the applications of IOT and RADAR.

Octagonal-shaped wideband MIMO antenna for human interface device and S-band application

2018 ◽  
Vol 11 (3) ◽  
pp. 287-296 ◽  
Author(s):  
Sanjay Chouhan ◽  
Debendra Kumar Panda ◽  
Vivek Singh Kushwah ◽  
Pankaj Kumar Mishra
Keyword(s):  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Human Head ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Human Interface ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Safety Limit ◽  
Interface Device

AbstractA four-element wide-band octagonal ring-shaped antenna is proposed for human interface device and S-band applications. The isolation structure comprises a parasitic element and a T-shaped structure. The antenna has −10 dB impedance bandwidth 63% (2.1–4.0 GHz) with miniaturized dimension of 54.98 mm × 76 mm. The multiple input multiple output (MIMO) antenna gain is 2.83 dBi at the 2.4 GHz resonant frequency. The designed MIMO has envelop correlation coefficient of 0.026 in the 2:1 VSWR band. The −10 dB total active reflection coefficient bandwidth of 1.2 GHz has been achieved in the entire frequency band, and has MEG value of ≤−3 dB. The specific absorption rate has found below the safety limit near the human head, palm and wrist.

scholarly journals Compact Fractal MIMO antenna for UWB applications

2021 ◽  
Vol 20 ◽  
pp. 146-151
Author(s):  
Edgar Alejandro Andrade-Gonzalez ◽  
Juan Carlos Ordoñez-Martínez ◽  
Mario Reyes-Ayala ◽  
José Alfredo Tirado Méndez ◽  
Hilario Terres-Peña
Keyword(s):  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Antenna System ◽  
Wide Frequency Range ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications ◽  
Uwb Communication

In this article, a compact ultra-wide band (UWB) multiple input multiple output (MIMO) antenna system is showed. This antenna is based on fractal Fibonacci circles and operates over wide frequency range from 2.9 to 14.51 GHz. The dielectric used was Duroid substrate with dielectric constant εr = 2.2 and thickness of substrate 1.27 mm. This UWB MIMO antenna is simulated by HFSS. In order to improve the isolation between the elements of the antenna a parasitic structure is used, getting S12 and very low ECC. Also, the Total Active reflection Coefficient (TARC) was obtained. Proposed antenna can be used for UWB communication applications and its size is 64 × 38mm2

scholarly journals Design of Band-Notched MIMO Antenna for UWB Applications

2021 ◽  
pp. 1-7
Author(s):  
Ahmed Shaker ◽  
◽  
Ayman Haggag
Keyword(s):  
Return Loss ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Total Size ◽  
Mimo Antenna ◽  
Notched Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) Multiple-Input-Multiple-Output (MIMO) antenna with a notched band is presented. The proposed design consists of four unipolar UWB radiators, and these monopole radiators are placed perpendicular to each other to exploit polarization diversity, where the four-element ultra-wideband (UWB) Multiple-Input-Multiple-Output (MIMO) antenna is presented. The total size of the antenna is 60x60 mm2. The operating frequency of the antenna is 3.1–11 GHz with a return loss of less than 10 dB, except at the notched band of 4.9– 5.9 GHz. This antenna consists of an isosceles trapezoidal plate with a circular notch cut and two transitional steps as well as a partial ground plane. For UWB bandwidth enhancement techniques: use of a partial ground plane, and modify the gap between the radioactive element and ground plane technique, using steps to control the resistance stability and a notch cut technique. The notch cut from the radiator is too used to reduce the size of the plane antenna. The measured -10 dB return loss bandwidth for the designed antenna is about 116.3% (8.7 GHz). The MIMO antenna does not require any additional structure to improve insulation. The proposed antenna supplies an acceptable radiation pattern and relatively flat gain over the entire frequency band.

scholarly journals Design of SWB MIMO Antenna with Extremely Wideband Isolation

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 194 ◽  
Author(s):  
Habib Ullah ◽  
Saeed Ur Rahman ◽  
Qunsheng Cao ◽  
Ijaz Khan ◽  
Hamid Ullah
Keyword(s):  
Mutual Coupling ◽  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Swb Applications ◽  
Compact Planar

This paper presents a compact planar multiple input multiple output (MIMO) antenna for super wide band (SWB) applications. The presented MIMO antenna comprises two identical patches on the same substrate. Dimensions of the MIMO antenna are 0.17λ × 0.20λ × 0.006λ mm3, with respect to the lowest resonance of 1.30 GHz. The SWB antenna was manufactured using F4B substrate having a dielectric constant of 2.65 that provides a percent impedance bandwidth and bandwidth ratio of 187% and 30.76:1, respectively. The mutual coupling between the antenna elements is suppressed by placing a T-shaped corrugated strip in the mid of two antenna elements. The proposed MIMO antenna exhibits maximum diversity gain of 10 dB, low mutual coupling (<−20 dB), low envelope correlation coefficient (ECC < 0.02), efficiency >80%, and low reflection coefficient (<−10 dB) in the SWB frequency range (1.30 GH–40 GHz). The presented antenna is a good candidate for SWB applications. The designed antenna has been experimentally validated, and the simulated results were also verified.

scholarly journals Design and Investigation of Modern UWB-MIMO Antenna with Optimized Isolation

Micromachines ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 432
Author(s):  
Muhammad Irshad Khan ◽  
Muhammad Irfan Khattak ◽  
Saeed Ur Rahman ◽  
Abdul Baseer Qazi ◽  
Ahmad Abdeltawab Telba ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
High Isolation ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications ◽  
Total Impedance ◽  
Swb Applications

This paper proposes a compact, semi-circular shaped multiple input multiple output (MIMO) antenna design with high isolation and enhanced bandwidth for ultrawide band (UWB) applications. A decoupling stub is used for high isolation reaching up to −55 dB over the entire bandwidth. The proposed antenna is used for UWB as well as super wide band (SWB) applications. The overall size of the proposed antenna is 18 × 36 × 1.6 mm3. The | S 11 | and voltage standing wave ratio (VSWR) of the proposed antenna are less than −10 dB and 2, respectively, in the range of 3–40 GHz. The total impedance bandwidth of the proposed design is 37 GHz. The VSWR, | S 11 | , | S 22 | , | S 21 | , | S 12 | , gain, envelope correlation coefficient (ECC), radiation pattern, and various other characteristic parameters are discussed in detail. The proposed antenna is optimized and simulated in a computer simulation technology (CST) studio, and printed on a FR4 substrate.

Design of an interlocked four-port MIMO antenna for UWB automotive communications

2021 ◽  
pp. 1-8
Author(s):  
M. Saravanan ◽  
R. Kalidoss ◽  
B. Partibane ◽  
K. S. Vishvaksenan
Keyword(s):  
Multiple Input Multiple Output ◽  
Performance Estimation ◽  
Ultra Wideband ◽  
Antenna Element ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Peak Gain

Abstract The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals DESIGN AND ANALYSIS OF COMPACT METAMATERIAL MIMO ANTENNA FOR WLAN APPLICATIONS

2019 ◽  
Vol 57 (2) ◽  
pp. 223
Author(s):  
Hoa Nguyen Thi Quynh ◽  
Sy Tuan Tran ◽  
Huu Lam Phan ◽  
Duy Tung Phan
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Split Ring Resonator ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Complementary Split Ring Resonator ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
The Individual

A compact three-port metamaterial multiple-input-multiple-output (MIMO) antenna using complementary split-ring resonator (CSRR) loaded ground have demonstrated in order to miniaturize the size and improve the antenna performance. The antenna is designed on FR4 material and simulated by HFSS software. By loading CSRRs in the ground plane, the size reduction of 77% of the individual patch antenna element is achieved, which appeared to be the major reason for the obtained the compact MIMO antenna. Furthermore, the simulated results show that the proposed MIMO antenna achieves the total gain higher than 5 dB, the isolation less than -11 dB, the envelope correlation coefficient (ECC) value lower than 0.015, and the bandwidth of 100 MHz through the whole WLAN band from 2.4 GHz to 2.484 GHz, indicating promises for WLAN applications.

scholarly journals A MIMO H-shape Dielectric Resonator Antenna for 4G Applications

2018 ◽  
Vol 10 (2) ◽  
pp. 648
Author(s):  
S. Salihah ◽  
M. H. Jamaluddin ◽  
R. Selvaraju ◽  
M. N. Hafiz
Keyword(s):  
Electrical Properties ◽  
Dielectric Resonator ◽  
Return Loss ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Potential ◽  
Slot Coupling

In this article, a Multiple-Input-Multiple-Output (MIMO) H-shape Dielectric Resonator Antenna (DRA) is designed and simulated at 2.6 GHz for 4G applications. The proposed structure consists of H-shape DRA ( =10) which is mounted on FR4 substrate ( =4.6), and feed by two different feeding mechanisms. First, microstrip with slot coupling as Port 1. Second, coaxial probe as Port 2. The electrical properties of the proposed MIMO H-shape DRA in term of return loss, bandwidth and gain are completely obtained by using CST Microwave Studio Suite Software. The simulated results demonstrated a return loss more than 20 dB, an impedance bandwidth of 26 % (2.2 – 2.9 GHz), and gain of 6.11 dBi at Port 1. Then, a return loss more than 20 dB, an impedance bandwidth of 13 % (2.2 – 2.7 GHz), and gain of 6.63 dBi at Port 2. Both ports indicated impedance bandwidth more than 10 %, return loss lower than 20 dB, and gain more than 10 dBi at 2.6 GHz. The simulated electrical properties of the proposed design show a good potential for LTE applications.

Sign in / Sign up

Export Citation Format

Share Document