Synthesis and Characterization of Nanosized Cu/ZnO Catalyst by Polyol Method

2008 ◽  
Vol 8 (2) ◽  
pp. 874-877 ◽  
Author(s):  
Tuba Gürkaynak Altınçekiç ◽  
Ismail Boz ◽  
Selçuk Aktürk
Keyword(s):  
Electron Microscopy ◽  
Metallic Copper ◽  
Average Crystallite Size ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Nanosized Catalysts ◽  
Scanning Electron

Nanosized catalysts composed of metallic copper supported on zinc oxide have been synthesized by the polyol process. Average crystallite size of copper was between 10 and 45 nm. Cu/ZnO catalyst particles were characterized by various techniques, such as X-ray Powder Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), and dynamic light scattering analysis (DLS).

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Synthesis and Characterization of Novel AlF3 Cubes

NANO ◽  
2015 ◽  
Vol 10 (05) ◽  
pp. 1550071 ◽  
Author(s):  
Maoquan Xue ◽  
Changsheng Li
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Metal Fluoride ◽  
Controlled Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Cubic Structure ◽  
Synthesis Approach ◽  
Scanning Electron

In this paper, regularly shaped AlF 3 particles with cubic structure were successfully synthesized via a solvothermal route. The as-prepared products were characterized by X-ray powder diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The experimental results indicated that reaction temperature and time have significant effects on the morphology of the as-prepared products. A possible formation process has also been investigated on the basis of a series of XRD and SEM studies of the product obtained at different conditions. This well-controlled synthesis approach may be extended to fabricate other metal fluoride materials.

Surfactant-Assisted Synthesis and Characterization of SrCrO4 Nanostructures

2006 ◽  
Vol 6 (3) ◽  
pp. 738-742 ◽  
Author(s):  
Di Chen ◽  
Kaibin Tang ◽  
Shuyuan Zhang ◽  
Huagui Zheng ◽  
Yitai Qian
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
Reaction Systems ◽  
X Ray ◽  
Transmission Electron ◽  
High Resolution Tem ◽  
Surfactant Assisted ◽  
Scanning Electron

A simple and efficient microemulsion-based technique, which used the new Tx-100/cyclohexanol/H2O system, was developed to synthesize SrCrO4 nanowire based nanostructures, including nanowire bundles and flower-like structures at different temperature. X-ray powder diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) were used to characterize the products. Studies found that the reaction temperatures and the reaction systems have great influences on the final products. Optical properties studies by UV-Vis spectra and photoluminescence (PL) spectra confirmed that the as-obtained nanowires showed distinct optical activity under UV and visible light irradiation.

Hydrothermal Synthesis and Characterization of Single-Crystal Lead Titanate Nanoflakes

2010 ◽  
Vol 152-153 ◽  
pp. 1222-1226
Author(s):  
Yong Gang Wang ◽  
Lin Lin Yang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang ◽  
Gao Rong Han
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Crystal ◽  
Lead Titanate ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
High Resolution Tem

Single-crystal PbTiO3 nanoflakes have been synthesized successfully by a hydrothermal method. The as-prepared powders were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and selected area electron diffraction (SAED). It was found that KOH concentration played a key role in the growth of single-crystal tetragonal perovskite PbTiO3 nanoflakes, and the morphology of PbTiO3 crystallites can be controlled by adjusting the KOH concentration.

Microwave Assisted Reflux Synthesis and Characterization of Magnetic Fe3O4 Micro Bubbles Embed in Nano Particles

2013 ◽  
Vol 763 ◽  
pp. 12-16
Author(s):  
Saba Jamil ◽  
Xiao Yan Jing ◽  
Jun Wang ◽  
Song Nan Li ◽  
Jing Yuan Liu
Keyword(s):  
Electron Microscopy ◽  
Nano Particles ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microwave Assisted ◽  
Transmission Electron ◽  
Small Nanoparticles ◽  
Scanning Electron

Magnetic Fe3O4 nanobubbles surrounded by nanoparticles are prepared by adopting microwave assisted reflux method. The nanomagnetic particles surrounded by small beads like particles are fabricated by irradiating the prepaperd sample solutions by microwave radiations coupled with reflux method simultaneously at 90°C for 45 mins. The characterization of the prepared Fe3O4 particles are carried out by using x ray diffraction, scanning electron microscopy and transmission electron microscopy. The instrumentations shows the morphology that is thick walled bubble like with approximate diameter of about 300 nm to 400 nm surrounded by small nanoparticles of 5 nm to 30 nm in range. The particles are bubbles like and some broken bubbles showed that these might be hollow from inside.

scholarly journals Synthesis and characterization of Fe, Co, and Ni colloids in 2-mercaptoethanol

2020 ◽  
Vol 10 ◽  
pp. 184798042096688
Author(s):  
Galo Cárdenas-Triviño ◽  
Sergio Triviño-Matus
Keyword(s):  
Electron Microscopy ◽  
Electron Diffraction ◽  
Colloidal Dispersions ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Chemical Liquid Deposition ◽  
Liquid Deposition

Metal colloids in 2-mercaptoethanol using nanoparticles (NPs) of iron (Fe), cobalt (Co), and nickel (Ni) were prepared by chemical liquid deposition method. Transmission electron microscopy, electron diffraction, UV-VIS spectroscopy, and scanning electron microscopy with electron dispersive X-ray spectroscopy characterized the resulting colloidal dispersions. The NPs exhibited sizes with ranges from 9.8 nm for Fe, 3.7 nm for Co, and 7.2 nm for Ni. The electron diffraction shows the presence of the metals in its elemental state Fe (0), Co (0), and Ni (0) and also some compounds FeO (OH), CoCo2S4, and NiNi2S4.

Characterization of Al65.0Cu32.9Co2.1 Alloy Containing Nanofibres

2012 ◽  
Vol 186 ◽  
pp. 212-215
Author(s):  
Jacek Krawczyk ◽  
Włodzimierz Bogdanowicz ◽  
Grzegorz Dercz ◽  
Wojciech Gurdziel
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
Chemical Compositions ◽  
X Ray ◽  
Transmission Electron ◽  
Orthogonal Set ◽  
T Phase ◽  
Terminal Area ◽  
Scanning Electron

Microstructure of terminal area of Al65Cu32.9Co2.1ingots (numbers indicate at.%), obtained via directional solidification was studied. Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray powder diffraction were applied. Point microanalysis by Scanning Electron Microscope was used for examination of chemical compositions of alloy phases. It was found that tetragonal θ phase of Al2Cu stoichiometric formula was the dominate phase (matrix). Additionally the alloy contained orthogonal set of nanofibres of Al7Cu2Co T phase with the average diameter of 50-500 nm and oval areas of hexagonal Al3(Cu,Co)2H-phase, surrounded by monoclinic AlCu η1phase rim. Inside some areas of H-phase cores of decagonal quasicrystalline D phase were observed.

scholarly journals Synthesis and characterization of apatite silicated powders with wet precipitation method

2021 ◽  
Vol 234 ◽  
pp. 00106
Author(s):  
Houda Labjar ◽  
Hassan Chaair
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Precipitation ◽  
Scanning Electron

The synthesis of apatite silicated Ca10(PO4)6-x(SiO4)x(OH)2-x (SiHA) with 0≤x≤2 was investigated using a wet precipitation method followed by heat treatment using calcium carbonate CaCO3 and phosphoric acid H3PO4 and silicon tetraacetate SiC8H20O4 (TEOS) in medium of water ethanol, with three different silicate concentrations. After drying, the samples are ground and then characterized by different analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron Microscopy (SEM) and chemical analysis.

Synthesis and Characterization of Cu2FeSnS4 Semiconductor Nanocrystals with Zincblende Structure

2012 ◽  
Vol 512-515 ◽  
pp. 2019-2022 ◽  
Author(s):  
Xiao Lu Liang ◽  
Xian Hua Wei
Keyword(s):  
Random Distribution ◽  
Semiconductor Nanocrystals ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Nir Absorption ◽  
Average Size

Cu2FeSnS4semiconductor nanocrystals with zincblende structure have been successfully synthesized by a hot-injection approach. Cu+, Fe2+, and Sn4+cations have a random distribution in the zincblende unit cell, and the occupancy possibilities are 1/2, 1/4 and 1/4, respectively. Those nanocrystals were characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy dispersive spectroscopy (EDS), and UV-Vis-NIR absorption spectroscopy. The Cu2FeSnS4 nanocrystals have an average size of 7.5 nm and a band gap of 0.92 eV.

Sign in / Sign up

Export Citation Format

Share Document