One-Step Preparation of Surface-Modified Particle Electrodes via Sol–Gel Method and Its Performance in Fracturing Flowback Fluid Treatment

2019 ◽  
Vol 11 (1) ◽  
pp. 93-98
Author(s):  
Shuan Liu ◽  
Zhaoyang Wang ◽  
Junfeng Li ◽  
Chun Zhao ◽  
Xiaolei Teng ◽  
...  
2014 ◽  
Vol 89 (5) ◽  
pp. 445-452 ◽  
Author(s):  
K. S. Venkatesh ◽  
S. R. Krishnamoorthi ◽  
N. S. Palani ◽  
V. Thirumal ◽  
Sujin P. Jose ◽  
...  

2019 ◽  
Vol 93 (2) ◽  
pp. 273-280
Author(s):  
Shahid Khan ◽  
Mahmood ul Haq ◽  
Yecheng Ma ◽  
Mohammad Nisar ◽  
Youduo Li ◽  
...  

2014 ◽  
Vol 602-603 ◽  
pp. 689-694
Author(s):  
Dan Yu ◽  
Qi Long Zhang ◽  
Hui Yang ◽  
Jue Hui Zhou

The effects of rare-earth ions Sc3+ and Gd3+ on phase transition, microstructure and dielectric properties were investigated systematically. Gd-and Sc-co-doped nanopowders were synthesized via one-step sol-gel method. After xerogel was calcined at 800 °C for 2h, (1x)BaTiO3-xGdScO3 (0 x 0.06) nanopowders with narrow particle distribution was obtained. The nanopowders were then pressed into pellets and sintered at 1300~1450 °C respectively. The results indicated that the dielectric peaks of samples were broadened since double doping restrained the grain growth of BaTiO3 ceramics. For x = 0.06, pellets sintered at different temperatures can obtain a low curie temperature of 25 °C. Meanwhile, accompanied by an increasing sintering temperature, the dielectric loss of samples decreased gradually, achieving a optimal value of 1.1%.


RSC Advances ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 86-94 ◽  
Author(s):  
Ryuhei Nishiyabu ◽  
Yuki Takahashi ◽  
Taro Yabuki ◽  
Shoji Gommori ◽  
Yuki Yamamoto ◽  
...  

The self-assembly of polyvinyl alcohol (PVA) and benzene-1,4-diboronic acid (DBA) is employed as a sol–gel method for one-step fabrication of hydrogel coatings with versatile functionalities.


2009 ◽  
Vol 412 ◽  
pp. 287-290 ◽  
Author(s):  
Saki Sakakibara ◽  
Tohru Suzuki ◽  
Atsunori Matsuda ◽  
Tetsuo Uchikoshi

The surface modification of SiC powder with an alumina precursor was achieved by a sol-gel method to apply the electrophoretic deposition (EPD) technique to the shaping of the SiC powder. The isoelectric point of the surface-modified SiC powder with sol-gel-derived alumina precursor was shifted to around pH 9, which is close to that of alumina. The alumina-coated SiC deposited on a cathodic substrate by EPD. The green compact of surface-modified SiC powder was sintered by hot pressing in an argon atmosphere at 2000oC.


Sign in / Sign up

Export Citation Format

Share Document