scholarly journals Height Correction of Atmospheric Motion Vectors Using Airborne Lidar Observations

2013 ◽  
Vol 52 (8) ◽  
pp. 1868-1877 ◽  
Author(s):  
Martin Weissmann ◽  
Kathrin Folger ◽  
Heiner Lange
Keyword(s):  
North Pacific Ocean ◽  
Weather Prediction ◽  
Airborne Lidar ◽  
Discrete Level ◽  
Motion Vectors ◽  
Wind Speeds ◽  
Atmospheric Motion ◽  
Height Assignment ◽  
Atmospheric Motion Vectors ◽  
Lidar Observations

AbstractUncertainties in the height assignment of atmospheric motion vectors (AMVs) are the main contributor to the total AMV wind error, and these uncertainties introduce errors that can be horizontally correlated over several hundred kilometers. As a consequence, only a small fraction of the available AMVs are currently used in numerical weather prediction systems. For this reason, alternative approaches for the height assignment of AMVs are investigated in this study: 1) using collocated airborne lidar observations and 2) treating AMVs as layer winds instead of winds at a discrete level. Airborne lidar observations from a field campaign in the western North Pacific Ocean region are used to demonstrate the potential of improving AMV heights in an experimental framework. On average, AMV wind errors are reduced by 10%–15% when AMV winds are assigned to a 100–150-hPa-deep layer beneath the cloud top derived from nearby lidar observations. In addition, the lidar–AMV height correction is expected to reduce the correlation of AMV errors as lidars provide independent cloud height information. This suggests that satellite lidars may be a valuable source of information for the AMV height assignment in the future. Furthermore, AMVs are compared with dropsonde and radiosonde winds averaged over vertical layers of different depth to investigate the optimal height assignment for AMVs in data assimilation. Consistent with previous studies, it is shown that AMV winds better match sounding winds vertically averaged over ~100 hPa than sounding winds at a discrete level. The comparison with deeper layers further reduces the RMS difference but introduces systematic differences of wind speeds.

scholarly journals Height Correction of Atmospheric Motion Vectors Using Satellite Lidar Observations from CALIPSO

2014 ◽  
Vol 53 (7) ◽  
pp. 1809-1819 ◽  
Author(s):  
Kathrin Folger ◽  
Martin Weissmann
Keyword(s):  
Prediction Models ◽  
Initial Conditions ◽  
Weather Prediction ◽  
Current Data ◽  
Motion Vectors ◽  
Deep Layers ◽  
Atmospheric Motion ◽  
Height Assignment ◽  
Atmospheric Motion Vectors ◽  
Lidar Observations

AbstractAtmospheric motion vectors (AMVs) provide valuable wind information for the initial conditions of numerical weather prediction models, but height-assignment issues and horizontal error correlations require a rigid thinning of the available AMVs in current data assimilation systems. The aim of this study is to investigate the feasibility of correcting the pressure heights of operational AMVs from the geostationary satellites Meteosat-9 and Meteosat-10 with cloud-top heights derived from lidar observations by the polar-orbiting Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. The study shows that the wind error of AMVs above 700 hPa is reduced by 12%–17% when AMV winds are assigned to 120-hPa-deep layers below the lidar cloud tops. This result demonstrates the potential of lidar cloud observations for the improvement of the AMV height assignment. In addition, the lidar correction reduces the “slow” bias of current upper-level AMVs and is expected to reduce the horizontal correlation of AMV errors.

scholarly journals The Sentinel-3 SLSTR Atmospheric Motion Vectors Product at EUMETSAT

2021 ◽  
Vol 13 (9) ◽  
pp. 1702
Author(s):  
Kévin Barbieux ◽  
Olivier Hautecoeur ◽  
Maurizio De Bartolomei ◽  
Manuel Carranza ◽  
Régis Borde
Keyword(s):  
Land Surface ◽  
Weather Prediction ◽  
Forecast Model ◽  
Low Earth Orbit ◽  
Reference Image ◽  
Motion Vectors ◽  
Infrared Imager ◽  
Atmospheric Motion ◽  
Atmospheric Motion Vectors ◽  
Leo Satellite

Atmospheric Motion Vectors (AMVs) are an important input to many Numerical Weather Prediction (NWP) models. EUMETSAT derives AMVs from several of its orbiting satellites, including the geostationary satellites (Meteosat), and its Low-Earth Orbit (LEO) satellites. The algorithm extracting the AMVs uses pairs or triplets of images, and tracks the motion of clouds or water vapour features from one image to another. Currently, EUMETSAT LEO satellite AMVs are retrieved from georeferenced images from the Advanced Very-High-Resolution Radiometer (AVHRR) on board the Metop satellites. EUMETSAT is currently preparing the operational release of an AMV product from the Sea and Land Surface Temperature Radiometer (SLSTR) on board the Sentinel-3 satellites. The main innovation in the processing, compared with AVHRR AMVs, lies in the co-registration of pairs of images: the images are first projected on an equal-area grid, before applying the AMV extraction algorithm. This approach has multiple advantages. First, individual pixels represent areas of equal sizes, which is crucial to ensure that the tracking is consistent throughout the processed image, and from one image to another. Second, this allows features that would otherwise leave the frame of the reference image to be tracked, thereby allowing more AMVs to be derived. Third, the same framework could be used for every LEO satellite, allowing an overall consistency of EUMETSAT AMV products. In this work, we present the results of this method for SLSTR by comparing the AMVs to the forecast model. We validate our results against AMVs currently derived from AVHRR and the Spinning Enhanced Visible and InfraRed Imager (SEVIRI). The release of the operational SLSTR AMV product is expected in 2022.

scholarly journals Development of Enhanced Vortex-Scale Atmospheric Motion Vectors for Hurricane Applications

2019 ◽  
Vol 11 (17) ◽  
pp. 1981 ◽  
Author(s):  
David Stettner ◽  
Christopher Velden ◽  
Robert Rabin ◽  
Steve Wanzong ◽  
Jaime Daniels ◽  
...  
Keyword(s):  
Weather Prediction ◽  
Global Scale ◽  
Motion Vectors ◽  
Weather Events ◽  
Convective Scale ◽  
Satellite Sensors ◽  
Atmospheric Motion ◽  
Scanning Strategies ◽  
New Generation ◽  
Atmospheric Motion Vectors

Atmospheric motion vectors (AMVs) derived from geostationary meteorological satellites have long stood as an important observational contributor to analyses of global-scale tropospheric wind patterns. This paradigm is evolving as numerical weather prediction (NWP) models and associated data assimilation systems are at the point of trying to better resolve finer scales. Understanding the physical processes that govern convectively-driven weather systems is usually hindered by a lack of observations on the scales necessary to adequately describe these events. Fortunately, satellite sensors and associated scanning strategies have improved and are now able to resolve convective-scale flow fields. Coupled with the increased availability of computing capacity and more sophisticated algorithms to track cloud motions, we are now poised to investigate the development and application of AMVs to convective-scale weather events. Our study explores this frontier using new-generation GOES-R Series imagery with a focus on hurricane applications. A proposed procedure for processing enhanced AMV datasets derived from multispectral geostationary satellite imagery for hurricane-scale analyses is described. We focus on the use of the recently available GOES-16 mesoscale domain sector rapid-scan (1-min) imagery, and emerging methods to optimally extract wind estimates (atmospheric motion vectors (AMVs)) from close-in-time sequences. It is shown that AMV datasets can be generated on spatiotemporal scales not only useful for global applications, but for mesoscale applications such as hurricanes as well.

scholarly journals A Direct Link between Feature Tracking and Height Assignment of Operational EUMETSAT Atmospheric Motion Vectors

2014 ◽  
Vol 31 (1) ◽  
pp. 33-46 ◽  
Author(s):  
Régis Borde ◽  
Marie Doutriaux-Boucher ◽  
Greg Dew ◽  
Manuel Carranza
Keyword(s):  
Feature Tracking ◽  
Cross Correlation ◽  
Motion Vectors ◽  
Tracking Process ◽  
Extraction Scheme ◽  
Atmospheric Motion ◽  
Image Pixels ◽  
The Individual ◽  
Height Assignment ◽  
Atmospheric Motion Vectors

Abstract Height assignment (HA) is currently the most challenging task in the operational atmospheric motion vectors’ (AMV) extraction scheme. Several sources of error are associated with the height assignment step, including the sensitivity of the HA methods to several atmospheric parameters. However, one of the main difficulties is to identify, for the HA calculation, the most significant image pixels used in the feature-tracking process. The most widely used method selects the coldest pixels in a representative target box (e.g., coldest 25%) to infer the height of the detected feature, irrespective of what was tracked. This paper presents a method based on a closer link between the pixels used for tracking and their HA. The individual contribution to the overall tracking cross-correlation coefficient is used to identify the most significant pixels contributing to the tracking. This approach has been implemented operationally at European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) to derive AMVs since September 2012. This paper details the method, gives specific examples, and provides a first glance at its performances and benefits for the operational AMV production.

scholarly journals GEO-GEO Stereo-Tracking of Atmospheric Motion Vectors (AMVs) from the Geostationary Ring

2020 ◽  
Author(s):  
James L. Carr ◽  
Dong L. Wu ◽  
Jaime Daniels ◽  
Mariel D. Friberg ◽  
Wayne Bresky ◽  
...  
Keyword(s):  
Deep Convection ◽  
Motion Vectors ◽  
Fire Smoke ◽  
Atmospheric Motion ◽  
Image Navigation ◽  
Boundary Layer Dynamics ◽  
Vantage Points ◽  
Height Assignment ◽  
Atmospheric Motion Vectors ◽  
Geostationary Ring

Height assignment is an important problem for satellite measurements of Atmospheric Motion Vectors (AMVs) that are interpreted as winds by forecast and assimilation systems. Stereo methods assign heights to AMVs from the parallax observed between observations from different vantage points in orbit while tracking cloud or moisture features. In this paper, we fully develop the stereo method to jointly retrieve wind vectors with their geometric heights from geostationary satellite pairs. Synchronization of observations between observing systems is not required. NASA and NOAA stereo-winds codes have implemented this method and we have processed large datasets from GOES-16, -17, and Himawari-8. Our retrievals are validated against rawinsonde observations and demonstrate the potential to improve forecast skill. Stereo winds also offer an important mitigation for the loop heat pipe anomaly on GOES-17 during times when warm focal plane temperatures cause infra-red channels that are needed for operational height assignments to fail. We also examine several application areas, including deep convection in tropical cyclones, planetary boundary layer dynamics, and fire smoke plumes, where stereo methods provide insights into atmospheric processes. The stereo method is broadly applicable across the geostationary ring where systems offering similar Image Navigation and Registration (INR) performance as GOES-R are deployed.

scholarly journals GEO-GEO Stereo-Tracking of Atmospheric Motion Vectors (AMVs) from the Geostationary Ring

2020 ◽  
Author(s):  
James L. Carr ◽  
Dong L. Wu ◽  
Jaime Daniels ◽  
Mariel D. Friberg ◽  
Wayne Bresky ◽  
...  
Keyword(s):  
Deep Convection ◽  
Motion Vectors ◽  
Fire Smoke ◽  
Atmospheric Motion ◽  
Image Navigation ◽  
Boundary Layer Dynamics ◽  
Vantage Points ◽  
Height Assignment ◽  
Atmospheric Motion Vectors ◽  
Geostationary Ring

Height assignment is an important problem for satellite measurements of Atmospheric Motion Vectors (AMVs) that are interpreted as winds by forecast and assimilation systems. Stereo methods assign heights to AMVs from the parallax observed between observations from different vantage points in orbit while tracking cloud or moisture features. In this paper, we fully develop the stereo method to jointly retrieve wind vectors with their geometric heights from geostationary satellite pairs. Synchronization of observations between observing systems is not required. NASA and NOAA stereo-winds codes have implemented this method and we have processed large datasets from GOES-16, -17, and Himawari-8. Our retrievals are validated against rawinsonde observations and demonstrate the potential to improve forecast skill. Stereo winds also offer an important mitigation for the loop heat pipe anomaly on GOES-17 during times when warm focal plane temperatures cause infra-red channels that are needed for operational height assignments to fail. We also examine several application areas, including deep convection in tropical cyclones, planetary boundary layer dynamics, and fire smoke plumes, where stereo methods provide insights into atmospheric processes. The stereo method is broadly applicable across the geostationary ring where systems offering similar Image Navigation and Registration (INR) performance as GOES-R are deployed.

Atmospheric Motion Vectors from Model Simulations. Part II: Interpretation as Spatial and Vertical Averages of Wind and Role of Clouds

2014 ◽  
Vol 53 (1) ◽  
pp. 65-82 ◽  
Author(s):  
Angeles Hernandez-Carrascal ◽  
Niels Bormann
Keyword(s):  
Weather Prediction ◽  
Cloud Layer ◽  
Cloud Base ◽  
Random Errors ◽  
Motion Vectors ◽  
Single Level ◽  
Model Cloud ◽  
Atmospheric Motion ◽  
Nwp Model ◽  
Atmospheric Motion Vectors

AbstractThis is the second part of a two-part paper whose main objective is to improve the characterization of atmospheric motion vectors (AMVs) and their errors to guide developments in the use of AMVs in numerical weather prediction (NWP). AMVs tend to exhibit considerable systematic and random errors. These errors can arise in the AMV derivation or the interpretation of AMVs as single-level point estimates of wind. An important difficulty in the study of AMV errors is the scarcity of collocated observations of clouds and wind. The study uses instead a simulation framework: geostationary imagery for Meteorological Satellite-8 (Meteosat-8) is generated from a high-resolution simulation with the Weather Research and Forecasting regional model, and AMVs are derived from sequences of these simulated images. The NWP model provides the “truth” with a sophisticated description of the atmosphere. This second part focuses on alternative interpretations of AMVs. The key results are 1) that interpreting the AMVs as vertical and horizontal averages of wind can give some benefits over the traditional single-level interpretation (improvements in RMSVD of 5% for high-level AMVs and 20% for low-level AMVs) and 2) that there is evidence that AMVs are more representative of either a wind average over the model cloud layer or wind at a representative level within the cloud layer than of wind at the model cloud top or cloud base.

scholarly journals Estimation of Atmospheric Motion Vectors from Kalpana-1 Imagers

2009 ◽  
Vol 48 (11) ◽  
pp. 2410-2421 ◽  
Author(s):  
C. M. Kishtawal ◽  
S. K. Deb ◽  
P. K. Pal ◽  
P. C. Joshi
Keyword(s):  
Water Vapor ◽  
Motion Vector ◽  
Satellite System ◽  
Radiosonde Data ◽  
Motion Vectors ◽  
Vector Difference ◽  
Atmospheric Motion ◽  
The Difference ◽  
Height Assignment ◽  
Atmospheric Motion Vectors

Abstract The estimation of atmospheric motion vectors from infrared and water vapor channels on the geostationary operational Indian National Satellite System Kalpana-1 has been attempted here. An empirical height assignment technique based on a genetic algorithm is used to determine the height of cloud and water vapor tracers. The cloud-motion-vector (CMV) winds at high and midlevels and water vapor winds (WVW) derived from Kalpana-1 show a very close resemblance to the corresponding Meteosat-7 winds derived at the European Organisation for the Exploitation of Meteorological Satellites when both are compared separately with radiosonde data. The 3-month mean vector difference (MVD) of high- and midlevel CMV and WVW winds derived from Kalpana-1 is very close to that of Meteosat-7 winds, when both are compared with radiosonde. When comparing with radiosonde, the low-level CMVs from Kalpana-1 have a higher MVD value than that of Meteosat-7. This may be due to the difference in spatial resolutions of Kalpana-1 and Meteosat-7.

scholarly journals Himawari-8 Atmospheric Motion Vectors - Operational Generation and Assimilation

2017 ◽  
Vol 67 (1) ◽  
pp. 12
Author(s):  
John Le Marshall ◽  
David Howard ◽  
Yi Xiao ◽  
Jamie Daniels ◽  
Steve Wanzong ◽  
...  
Keyword(s):  
Weather Prediction ◽  
Forecast Model ◽  
High Temporal Resolution ◽  
Motion Vectors ◽  
Atmospheric Motion ◽  
Nwp Model ◽  
Effective Use ◽  
New Generation ◽  
Atmospheric Motion Vectors ◽  
Resolution Data

In October 2014 the Japanese Meteorological Agency (JMA) launched the new generation geostationary satellite Himawari-8. This satellite provides ten minute imagery in sixteen wavebands over the Asian and Australasian region. The imagery has been navigated, calibrated and subsequently used in the Bureau of Meteorology (BoM) to generate Atmospheric Motion Vectors (AMVs) over the full earth disk viewed from the satellite every ten minutes. Each vector has been error characterised and assigned an expected error. In preparation for the operational assimilation of the ten minute data, these high temporal and spatial resolution data were used with the BoM operational database to provide forecasts from the next generation operational forecast model ACCESS APS2 using 4D Var. Results from these tests indicate these locally generated Himawari-8 ten minute AMVs are of high density and quality and have the potential to improve numerical weather prediction (NWP) model initialisation and forecasts. The forecasts undertaken include cases associated with extreme weather. The results also provided the appropriate times, data selection and application methods for the effective use of these high temporal resolution data. As a result of these studies these wind data were approved for inclusion in the BoMs operational database and are used in operational forecasting.

Sign in / Sign up

Export Citation Format

Share Document